Anyone have an extra Holset?

[ForceFed4g63]

Do any of you diesel guys out there have a Holset you aren't using, preferably an HX-35? Just throwing some feelers out there.

[SOADweskey]

http://turbocharged.com/main.htm

These guys are out in Ca but I got my freshly rebuilt 7-blade HX-35 from them for around $450.

[ForceFed4g63]

Thanks Wes, are you running a T3 flange or BEP?

[SOADweskey]

I'm running the BEP bolt on housing. I would like to have something better than the .55 A/R housing but there are a few guys I know running 11.1 and 11.2 passes with them so it is enough for my goal of a fun street car.

$450 didn't include the BEP housing.

[bigcubes]

I have a he 351 holset. What you going to do with it.

[ForceFed4g63]

I'm running the BEP bolt on housing. I would like to have something better than the .55 A/R housing but there are a few guys I know running 11.1 and 11.2 passes with them so it is enough for my goal of a fun street car.

$450 didn't include the BEP housing.

Yea I'm still not set on what turbo setup I want to run. The HX-35 seems like a good turbo, but also seems like a pain in the ass to install. Did you have to dent your waterpipe? I've heard you also have to make some custom oil lines and what not.



I have a he 351 holset. What you going to do with it.

Not the one I was looking for, thank you for responding though!

[stackz]

if you can make it out to LKQ, there was one on a truck right out the entrance doors to the right as of 1pm yesterday...the area they stage the newest of the new arrivals.

compressor blades looked fine. I was in work clothes so I didnt try turning it. just fyi.

[ForceFed4g63]

if you can make it out to LKQ, there was one on a truck right out the entrance doors to the right as of 1pm yesterday...the area they stage the newest of the new arrivals.

compressor blades looked fine. I was in work clothes so I didnt try turning it. just fyi.

Hmmm thanks for the info, I was just out there Saturday grabbing some valve covers. I thought about taking a look to see if there were any out there but I didn't have enough time.

[SOADweskey]

Yea I'm still not set on what turbo setup I want to run. The HX-35 seems like a good turbo, but also seems like a pain in the ass to install. Did you have to dent your waterpipe? I've heard you also have to make some custom oil lines and what not.

I did have to dent my water pipe a bit but nothing to crazy. And I'm running a normal -4 feed line nothing crazy about it just a fitting to go from the metric threads on the center section to the AN fitting.

[cliff-1972]

I have one off my 98 5.9 12V cummins.I'd sell it.PM me #

[ForceFed4g63]

Thanks for the turbo Cliff, and that is one badass truck you have out there, I think it would be a great run with the Dirtymax :mrgreen:

[cliff-1972]

:bigthumb:

[sc2jz]

GM 6.5L turbo $450 i have a T3---T4 flange adapter for it so it works on a t4 flange as seen on my 2jzgte here
http://img443.imageshack.us/img443/876/turboe.jpg (http://imageshack.us/photo/my-images/443/turboe.jpg/)

*ZERO SHAFT PLAY
*3" v band
*internal gate has been welded to use external gate.
* no oil leaks
* on a caliper its almost 60mm
* just had it polished

[ForceFed4g63]

I did have to dent my water pipe a bit but nothing to crazy. And I'm running a normal -4 feed line nothing crazy about it just a fitting to go from the metric threads on the center section to the AN fitting.

Wes are you running the feed line from the head or the OFH? Do you have a list of the fittings and parts you used? I'm gonna try and start getting things together to use this bad boy.