FFFFFFFuuuuuuuuuuuu.........

[chrisheltra]

http://s3.amazonaws.com/kym-assets/photos/images/original/000/000/578/1234931504682.jpg

http://i548.photobucket.com/albums/ii342/chrisheltra/51ddff8f.jpg

Been trying forever to get this thing in the 6's on pump gas. This is the second .01 Ive got trying to do it. Went .0X all weekend at two different tracks and couldnt make it happen. Pretty sure Randy got a vid or my 7.01 vid and Rob (Foose) has a vid of one of my runs from Bowman.

[Mike]

Damn that's stout on pump gas, but your mph is down 1-2mph for 6.9x. You still running meth right? Put some more timing in it. :hide:

[chrisheltra]

Damn that's stout on pump gas, but your mph is down 1-2mph for 6.9x. You still running meth right? Put some more timing in it. :hide:

It still has meth and didnt like 14*. Started detonating.

I ran 6.8 with only 2 more MPH. My truck has always trapped slow for the ET.

[ForceFed4g63]

Lol, that's still damn quick in a fat pig of a truck!

[Bradleyrj]

You know, you could put a 50 shot on it and it would still be "pump gas"...

[gearmesh, inc.]

One thing I have noticed watching trucks in drag racing is that mph seems to suffer once speeds get over 70-75 mph as compared to cars which are more aerodynamically friendly.

[Sean]

Almost.. When you get pissed and decide to sell that motor, tell me.

[chrisheltra]

Almost.. When you get pissed and decide to sell that motor, tell me.

LOL It'll blow up long before I sell it.

[Derek]

Damn anymore weight you could shave?

[Sean]

Damn anymore weight you could shave?

Wheels and tires and interior.

[chrisheltra]

Damn anymore weight you could shave?

Yeah I can shave a metric shit ton of weight but then you start getting into the grey area of whether or not its a street car.

Front bogarts
Remove front bumper core
Remove A/C
Remove CC
Tubular LCA's
Manual rack
Remove passenger seat
Kirkey seat
Roll pan
Remove the 300# of audio equipment that's currently installed
Reinstall the much lighter stock hood

The more extreme reduction would be an aluminum block, TH400 and 9".

[Derek]

I understand where you are coming from.

[spdracr0]

I have some front bogarts, that would get you there..

[Bradleyrj]

I think removing any stereo stuff behind the seats, wheels/tires, and stock hood would help a great deal. There has to be someone that makes a tubular lightweight bumper support to save some weight.

[Mike]

Yeah I can shave a metric shit ton of weight but then you start getting into the grey area of whether or not its a street car.

Front bogarts
Remove front bumper core
Remove A/C
Remove CC
Tubular LCA's
Manual rack
Remove passenger seat
Kirkey seat
Roll pan
Remove the 300# of audio equipment that's currently installed
Reinstall the much lighter stock hood

The more extreme reduction would be an aluminum block, TH400 and 9".

I don't think if you put the STOCK hood back on and removed the AFTERMARKET stereo that anyone could argue that's it's not a street car :poke:

I agree though that is hauling ass for over 5k lbs.

[Bradleyrj]

What looks good is the short time. A 1.52 is a pretty decent time for any street car, much less a 5k truck.

[Derek]

Lol talking about reducing drag made me think of this.

http://www.youtube.com/watch?v=r3aqHbD-O9E&feature=youtube_gdata_player

[k5hart]

I'd say that's damn impressive for a truck!

[jmd]

take a laxative next time before the run. the weight loss may push you to it.


























j/k. strong run on pump gas.

[chrisheltra]

take a laxative next time before the run. the weight loss may push you to it.


























j/k. strong run on pump gas.

Man Ive already lost 40 lbs in the last 4 months what more do you want? :poke:

[Foose04]

Looks like you just need a light tail wind...

[DolSVT00]

Damn that's stout on pump gas, but your mph is down 1-2mph for 6.9x. You still running meth right? Put some more timing in it. :hide:

MPH is down on his truck because were running it rich, well that and 12* of advance doesn't help ither especially at the big end where its down 4* from that.

Even with Methanol we can't get it to go more than 12* on the 93 around here with his compression ratio and boost. I think he's running around 17-18 psi. He tried to lighten it up lastnite with my fronts but then the rears went away.

We've only run it on c16 once, and it was in the summer with around 19*. It went 6.8's but the MPH was low then too (IIRC 99?) and I looked at the log and seen where it was around 10* at around half track from the PCM pulling timing.

I need some more time with the C16 and the right conditions, if everything looked good and it hooked i'm fairly certain i could get it to run 6.6x with some locked timing and a lil leaner mix.

[Mike]

I need some more time with the C16 and the right conditions, if everything looked good and it hooked i'm fairly certain i could get it to run 6.6x with some locked timing and a lil leaner mix.

without a doubt.

[bwelch]

e85 is pump gas.....

[DolSVT00]

e85 is pump gas.....

Dont have the pipe for it. We tried it on matts truck , didnt matter how much fuel i commanded it started to lean out at around 5000 rpms because the 60# injectors were tapped out.

[spdracr0]

We are having an event in Darlington Saturday. If you guys can make it and possibly help with some tuning, I got some C16 for chris, 80lb injectors for Matt if he would like to try them. Come on down.,...

[Foose04]

Here's some pro'go action...:cheers

<iframe width="640" height="360" src="http://www.youtube.com/embed/p6IR0KQNHQY" frameborder="0" allowfullscreen></iframe>

[spdracr0]

You dont stop speeding that red truck I will never be able to catch it...good times!

[csikx]

I don't think if you put the STOCK hood back on and removed the AFTERMARKET stereo that anyone could argue that's it's not a street car :poke:

I agree though that is hauling ass for over 5k lbs.

:bigthumb:

Lol talking about reducing drag made me think of this.

http://www.youtube.com/watch?v=r3aqHbD-O9E&feature=youtube_gdata_player

Cliff notes of the results? :mrgreen: