PDA

View Full Version : Best local place to get stock curb rashed wheels fixed?


chrisheltra
02-02-2012, 10:30 PM
Speak now

Carlrx7
02-02-2012, 10:39 PM
netflix

Harry
02-02-2012, 10:55 PM
Tire Kimgdom

Harry
02-02-2012, 10:57 PM
No seriously. These guys.http://www.awrswheelrepair.com/charleston/

Carlrx7
02-02-2012, 11:04 PM
Speak now

what ever you find, if its a good job, lmk, i have some minor rash on the vette and tbss

blubyu87gt
02-02-2012, 11:22 PM
Be a baller and just buy new wheels. Problem solved.

DolSVT00
02-03-2012, 12:56 AM
We can strip them and fix the curb rash, the cost would be powder coat to make them look right.

chrisheltra
02-03-2012, 07:27 AM
Be a baller and just buy new wheels. Problem solved.

Im saving up for front bogarts as we speak.

We can strip them and fix the curb rash, the cost would be powder coat to make them look right.

Well talk more about it soon.

Red99T/A
02-03-2012, 12:35 PM
Call mike with silver king. He can work some serious magic. He is also an avid drag racer and car guy. Tell him Justin @ Charleston collision referred you. He is completely mobile and very reasonably priced. 843-670-0737

PapaBear
02-03-2012, 01:51 PM
Call mike with silver king. He can work some serious magic. He is also an avid drag racer and car guy. Tell him Justin @ Charleston collision referred you. He is completely mobile and very reasonably priced. 843-670-0737

Couldn't remember his name to save my life!

He did some wheels for a buddy of mine's Lexus. Turned out amazing, and the price was right on track.

chance04
02-14-2012, 06:12 PM
We can strip them and fix the curb rash, the cost would be powder coat to make them look right.

I wanna see before and after pics

coonrod
02-14-2012, 07:53 PM
we fix them at signature collision

spdracr0
02-14-2012, 10:59 PM
Rage gold body filler, sandpaper and some time,,,then powdercoat or paint.....

FRDnemesis
02-15-2012, 04:55 PM
Speak now


Weldcraft wheels. Nobody comes close. Bought a brand new set of wheels and needed the Backspacing changedk, so I sent them to him and the wheel was perfect when he finished. Take a look at his site, he does everything; even widens/narrows "stock" wheels.

www.weldcraftwheels.com

chrisheltra
02-15-2012, 05:12 PM
Weldcraft wheels. Nobody comes close. Bought a brand new set of wheels and needed the Backspacing changedk, so I sent them to him and the wheel was perfect when he finished. Take a look at his site, he does everything; even widens/narrows "stock" wheels.

www.weldcraftwheels.com

Thats were all the L guys send their stuff to get widened/narrowed. Didnt know they did repairs too.

snakeplissken
02-15-2012, 05:27 PM
Weldcraft wheels. Nobody comes close. Bought a brand new set of wheels and needed the Backspacing changedk, so I sent them to him and the wheel was perfect when he finished. Take a look at his site, he does everything; even widens/narrows "stock" wheels.

www.weldcraftwheels.com

Hmm, thinking about moving the rear wheels to the front and having the fronts widened 2" to put on the rear.

$300 a wheel sound about right?

Carlrx7
02-15-2012, 06:05 PM
Weldcraft did my rears, went from 18x8.5 to 18x11, around 430 bucks plus shipping (70)

-Carl

AverageJoe
02-15-2012, 07:51 PM
Weldcraft wheels. Nobody comes close. Bought a brand new set of wheels and needed the Backspacing changedk, so I sent them to him and the wheel was perfect when he finished. Take a look at his site, he does everything; even widens/narrows "stock" wheels.

www.weldcraftwheels.com

Looked perfect, but didn't fit on the car. lmao:hysterical:
Not Weldcraft's fault, but didn't fit nonetheless.

FRDnemesis
02-15-2012, 08:18 PM
Looked perfect, but didn't fit on the car. lmao:hysterical:
Not Weldcraft's fault, but didn't fit nonetheless.


Fit my 12 bolt, my brakes and my car just fine. Have pics to show it. What was needed for the person who bought them was to clearance their calipers more. Hindsight, I should have just swapped calipers with him as well. Then the person he sold them to wouldn't have had the same problem.

AverageJoe
02-15-2012, 08:31 PM
Fit my 12 bolt, my brakes and my car just fine. Have pics to show it. What was needed for the person who bought them was to clearance their calipers more. Hindsight, I should have just swapped calipers with him as well. Then the person he sold them to wouldn't have had the same problem.

Lies. Calipers would have to have been clearanced to pieces. I know, you had the super rare, unique to your car calipers.:roll: Bet you don't have any pics of the clearance! And I KNOW you NEVER moved the car with them on. I put the wheels on my car too, but could never have driven with them.

FRDnemesis
02-15-2012, 09:01 PM
Lies. Calipers would have to have been clearanced to pieces. I know, you had the super rare, unique to your car calipers.:roll: Bet you don't have any pics of the clearance! And I KNOW you NEVER moved the car with them on. I put the wheels on my car too, but could never have driven with them.



You don't know shit, "As usual" :hysterical: There's a shocker! :bigthumb:

AverageJoe
02-15-2012, 09:17 PM
You don't know shit, "As usual" :hysterical: There's a shocker! :bigthumb:

Right, go weld 2 bolts together and shut the fuck up.

brewerz28
02-15-2012, 10:28 PM
Right, go weld 2 bolts together and shut the fuck up.

Godamn joe what the fuck crawled up your ass. You sure are a internet badass.

FRDnemesis
02-15-2012, 10:44 PM
Godamn joe what the fuck crawled up your ass. You sure are a internet badass.


I hate when you get a floater :hysterical: I keep flushing, he just will not go down :hysterical:

AverageJoe
02-15-2012, 10:51 PM
Wow Jeff, you always have the funniest shit to say about dog shit, etc. Yet you never address what I'm talking about because you know what you did, you know you don't know shit about anything mechanical and you often watch your friends mod your cars for you or pay a shop to do it.

BigdaddyDupree
02-15-2012, 10:52 PM
............

brewerz28
02-15-2012, 11:06 PM
I have been told to excuse myself from this thread due the level of "nut swang" I obviously exhibited by my previous post.

LXtasy
02-15-2012, 11:08 PM
I have been told to excuse myself from this thread due the level of "nut swang" I obviously exhibited by my previous post.

You are a pretty big fella to swing from anyones nuts.

brewerz28
02-15-2012, 11:11 PM
You are a pretty big fella to swing from anyones nuts.

Tis why I dont hang from dem.

FRDnemesis
02-15-2012, 11:16 PM
Wow Jeff, you always have the funniest shit to say about dog shit, etc. Yet you never address what I'm talking about because you know what you did, you know you don't know shit about anything mechanical and you often watch your friends mod your cars for you or pay a shop to do it.



Flush, flush, flush............................... go down damnit :hysterical: