Is Heltra gunning for Foose???

[Bradleyrj]

Lots of extra weight loss stuff going on with both trucks. Foose keeps getting faster.. Heltra orders more parts.. Hmmm


/ Stirs shit :/ end thread.

[ForceFed4g63]

https://encrypted-tbn3.google.com/images?q=tbn:ANd9GcRjvihOXyaecBmgkKNIF1OpzYEIrs9Bf hwmYp-cQW0xDKl_4L3M

[blkscls1z]

Foose's truck faster than any Lightning on CHP???? :poke:

[1998ta__1991rs]

Foose's truck faster than any Lightning on CHP???? :poke:

i know of 2, possibly 3 that are faster

[chrisheltra]

If I was gunning for Foose why on earth would I continue to run on pump gas?

[BAD BOB]

b/c he is on pump gas?

[chrisheltra]

b/c he is on pump gas?

Theres a big difference in power potential between 93 and E85.

If I was interested in running his kind of times Id have to buy C16 because my fuel system wont support E85.

[BigdaddyDupree]

Which two lightnings are faster Zac? Ive never seen one local faster then 6.70

[Mike]

Which two lightnings are faster Zac? Ive never seen one local faster then 6.70

slow04 has been faster with nitrous, cause he's a cheater.

[DolSVT00]

Which two lightnings are faster Zac? Ive never seen one local faster then 6.70

Slow04 has been low 6.6 I believe.

[Mike]

Slow04 has been low 6.6 I believe.

Here is another cheater named Randy, oh oh oh my truck's faster than yours without the blower belt. :poke:

[1998ta__1991rs]

hasnt bills truck been that quick too?

[DolSVT00]

Here is another cheater named Randy, oh oh oh my truck's faster than yours without the blower belt. :poke:

Well it was, just saying.

[chrisheltra]

In all honesty though I hope every time that Rob goes to the track that he gets a new best and I know he wishes the same for me. Hes a good racer, competitor, mechanic and friend.

He has set the bar high and I hope to run his times or better in due time.

I have found out that its much more affordable to buy light weight parts to go quicker than it is to buy more horsepower. Its less stressful on parts too.

[ForceFed4g63]

In all honesty though I hope every time that Rob goes to the track that he gets a new best and I know he wishes the same for me. Hes a good racer, competitor, mechanic and friend.

He has set the bar high and I hope to run his times or better in due time.

I have found out that its much more affordable to buy light weight parts to go quicker than it is to buy more horsepower. Its less stressful on parts too.

So what's next for dropping weight?

[chrisheltra]

So what's next for dropping weight?

Id love to do a TH400, 9", manual rack, tubular lower control arms and fiber glass leafs but thats a lot of $$$$. I wish I had the funds to do an aluminum block too.

[Ct.TOPGUN]

Foose's truck faster than any Lightning on CHP???? :poke:

Nope!!!

In all honesty though I hope every time that Rob goes to the track that he gets a new best and I know he wishes the same for me. Hes a good racer, competitor, mechanic and friend.

He has set the bar high and I hope to run his times or better in due time.

I have found out that its much more affordable to buy light weight parts to go quicker than it is to buy more horsepower. Its less stressful on parts too.

Great way to look at competition. I always hope those I am gunning for get faster. It makes me think and do extra. That is fun for me.

And +1 on weight savings being easier on parts. But as for price? At my level it is running about $1K per tenth by getting lighter weight stuff. Getting 2 tenths or better getting knocked off right now in upstate Connectiucut. Yep, a pretty penny.

[FRDnemesis]

I have found out that its much more affordable to buy light weight parts to go quicker than it is to buy more horsepower. Its less stressful on parts too.


And this is why a lot of True Racers don't give a shit about dyno numbers. They understand that there is now a bigger picture in the equation!

I played the weight reduction game years ago. It is expensive but damn its worth it! There is an article on the vette forum right now where one shop is challening another to see who can get their Z06 from 3,100 down to 2,800 while still keeping it street legal, and full interior. They both have by now spent close to 10k each and are still 100lb short of their goal. Cool thing is; they are posting the results of every part and its weight reduction for all to see!

[chrisheltra]

And this is why a lot of True Racers don't give a shit about dyno numbers. They understand that there is now a bigger picture in the equation!

I played the weight reduction game years ago. It is expensive but damn its worth it! There is an article on the vette forum right now where one shop is challening another to see who can get their Z06 from 3,100 down to 2,800 while still keeping it street legal, and full interior. They both have by now spent close to 10k each and are still 100lb short of their goal. Cool thing is; they are posting the results of every part and its weight reduction for all to see!

Link?

[dkbmxer002]

Id love to do a TH400, 9", manual rack, tubular lower control arms and fiber glass leafs but thats a lot of $$$$. I wish I had the funds to do an aluminum block too.

i wonder how fast a lightning would go with an lsx in it haha.

[PapaBear]

i wonder how fast a lightning would go with an lsx in it haha.

Im sure it's been done........or has it?

[Whaler]

Turbos make more power than superchargers. One street legal Lightning is running 5.8's on a turbo 5.4 with a TH400. He's not on here though.

Rob's truck and Bad Bob have proven how strong the ls based turbo motors can run.

[Carlrx7]

Link?

http://forums.corvetteforum.com/c6-z06-discussion/2943745-jim-vs-jason-halltech-vs-katech-the-ultraleggera-power-to-weight-ratio-challenge.html

[blubyu87gt]

And this is why a lot of True Racers don't give a shit about dyno numbers. They understand that there is now a bigger picture in the equation!

I played the weight reduction game years ago. It is expensive but damn its worth it! There is an article on the vette forum right now where one shop is challening another to see who can get their Z06 from 3,100 down to 2,800 while still keeping it street legal, and full interior. They both have by now spent close to 10k each and are still 100lb short of their goal. Cool thing is; they are posting the results of every part and its weight reduction for all to see!


That's the only reason the Stang can beat Geos now. Took the spare tire and radio out. Weight reduction baby!!! Next up. Saturn's!

Really though 300 lbs is a good bit of weight on some of the newer cars. I stumbled across some place that sells repoduction body parts in carbon fiber. Was light (6 lbs for a set of fenders) but was damn expensive. Close to a grand for the set if I remember.

[spdracr0]

Foose's truck faster than any Lightning on CHP????
Hmmmm....

If my heads flowed like an LS head, this would get interesting. He def has that thing riding good!

[1BAD4DR]

Bill, Daryl, and Tommys has been faster but its not the the point. foose is an awesome guy nonetheless

[spdracr0]

I am just trying to keep up with Heltra and he goes all Jenny Craig on me. Guess I need to lose a couple lbs..

[BigdaddyDupree]

Bill, Daryl, and Tommys has been faster but its not the the point. foose is an awesome guy nonetheless

6.70s is what they went correct?

[bwelch]

I wonder how fast Rob would be with a built 6.0......

[chrisheltra]

I wonder how fast Rob would be with a built 7.0......

Fixed

[Ct.TOPGUN]

I am just trying to keep up with Heltra and he goes all Jenny Craig on me. Guess I need to lose a couple lbs..

He is learning!

6.70s is what they went correct?

I have been 6.3 @ 110+ on a run with quite a bit of tire spin and at full street weight. Been a bunch quicker since, but the track refused to give me my slip. They kinda freak out when they see no cage after a run like I made...

Hmmmm....

If my heads flowed like an LS head, this would get interesting. He def has that thing riding good!


They flow well enough. Just got to use what it does best. Although I dream about what the Trickflow "R" heads may do once released.

Jim

[Foose04]

I read the title and was thinking next time at the track it would be easy to spot Chris....

http://img.chan4chan.com/img/2010-05-03/1272844792015.jpg


Lol, honestly it's just fun racing and going faster. I think Chris is on the same page with me on that. The fact it's another truck is cool because the respect is there for going quick on a similar platform..

End of the day, chevy, ford, or whatever, it's good in my book if it's clean. Fast? Even better.

Any one going to Bowman tonight? We are loading up again tonight for more testing with my girls brothers bikes. We went to Carolina Dragway yesterday, first time I've ever drove out there and not raced, but fun to be on the pit crew. Might make a few hits at Bowman tonight though, looks like a nice day if the weather holds.

http://i152.photobucket.com/albums/s192/blackhawkawd91/d0c36587.jpg

[LXtasy]

I should be at bowman. I have to make try and make some mod money

[Mike]

6.70s is what they went correct?

Doesn't matter, none of them have made a pass since I sold my truck.

Bill's truck is a daily driver, Tommy sold his, and Daryl takes his to the golf course every other day.

[BAD BOB]

I read the title and was thinking next time at the track it would be easy to spot Chris....

http://img.chan4chan.com/img/2010-05-03/1272844792015.jpg


Lol, honestly it's just fun racing and going faster. I think Chris is on the same page with me on that. The fact it's another truck is cool because the respect is there for going quick on a similar platform..

End of the day, chevy, ford, or whatever, it's good in my book if it's clean. Fast? Even better.

Any one going to Bowman tonight? We are loading up again tonight for more testing with my girls brothers bikes. We went to Carolina Dragway yesterday, first time I've ever drove out there and not raced, but fun to be on the pit crew. Might make a few hits at Bowman tonight though, looks like a nice day if the weather holds.

http://i152.photobucket.com/albums/s192/blackhawkawd91/d0c36587.jpg


cool bikes. what they run last night?

[Foose04]

Well we are running around Charleston right now looking for a zx10 front sprocket nut, it backed off last night second pass. Went 9.5 first pass with a 1.59 sixty, second pass went 1.32 60 and sprocket nut came off bout half track... trying find one as these guy are wanting to race all weekend. The 636 had some issues to but went 10.6 with a 1.55 60.

[bambooi]

Man I want to get a bike again and drag race!

[chrisheltra]

Want to go tonight but just now got to sit down and relax. LOL@ Robs last post.

[Foose04]

Man I want to get a bike again and drag race!

I took my bike to Darlington twice when I had it, not a cloud in the sky till I got to the track and then it was poring rain. Figured it was a sign maybe I didn't need to be drag racing it.

These guys can both ride pretty good, but you never know whats down on the track waiting for you.

[Foose04]

Here's a couple pictures, it was nice till I bought a house and didn't own a single piece of furniture. Then it had to go... :mad:

http://a2.ec-images.myspacecdn.com/images02/41/091c7d69b42f4365a172f9e285cc427f/l.jpg


http://a2.ec-images.myspacecdn.com/images02/48/523cfb4069ef49058465b217d3be9c19/l.jpg

[bambooi]

Here's a couple pictures, it was nice till I bought a house and didn't own a single piece of furniture. Then it had to go... :mad:

http://a2.ec-images.myspacecdn.com/images02/41/091c7d69b42f4365a172f9e285cc427f/l.jpg


http://a2.ec-images.myspacecdn.com/images02/48/523cfb4069ef49058465b217d3be9c19/l.jpg

Nice bike. I've been to the rock and darlington when I had my r1. Any plans on another bike? I dont know how long ago it was but you have a truck now and you dont have to do a boring ride oh the interstate to get to the track.

[FRDnemesis]

Link?

http://forums.corvetteforum.com/c6-z06-discussion/2943745-jim-vs-jason-halltech-vs-katech-the-ultraleggera-power-to-weight-ratio-challenge.html

I apologize, I haven't looked at this post in a few days. I think you will find amazing at what lengths these guys are going through to just save 1 to 2 lbs. in some cases.

[nordic97mist]

weight reduction over teh horsepower? ricers.

[ForceFed4g63]

Lol.

http://i365.photobucket.com/albums/oo95/bigjaker/CHP.png