GTO part out

[adamcs]

Well i figured it was about time i got on here and saw if any of you guys are in need of any parts off of my car, I will be home every weekend from now on so if there is anything you need i can take off the following weekend and bring it to you right then. Here is what i know i have that is good.

Full blue interior
t56 trans, and everything behind it is still good
nitrous outlet 90mm plate, not selling the whole kit just the plate
stock springs with drag bags
eibach springs
spintech exhaust and american racing catted midpipes, the exhaust is bent on the drivers side tail pipe but i would sell it cheap and im sure it would be very easily fixed

That is all i can think of for now but i have everything selling minus the motor, but i have a stock ported intake and tb for sale so anything that you guys may need feel free to ask and ill do what i can. I also did not post prices because we can discuss them if there is anything you guys need. Im not going to try and rape anybody on prices so we can agree on something. If you need something it would be easiest if you text me at 8439014826. Thanks guys.

[oldskoolstang]

I know it wasn't listed, but do you by chance have the engine harness and computer? That's what I'm on the hunt for now for my Landcruiser LS swap.....

[adamcs]

I do, its a complete car minus the motor, just has some body damage, so if anybody needs any odds and ends i have it all.

[adamcs]

I also forgot to add that I have a nitrous outlet 90mm plate and the trans has a spec 3+ clutch

[schardbody]

nitrous plate 3 bolt or 4 bolt? how much?

[adamcs]

its a 4 bolt single stage plate, ill take 150 for it, and I also have a nitrous outlet bottle heater

[adamcs]

bump

[LXtasy]

Front bumper or rear valance

[adamcs]

Front bumper or rear valance

lol remind me friday and ill grab the bumper to hang on the wall

[Illusions]

throttle body DBW or cable? cathedral ports on the intake? I'm starting to look for stock or near stock parts for the swap in the White X.

[cmd]

$1 bob. How much u want for the whole car?

[79bluebird]

How bad is the body messed up? You sell it as a roller?

[LXtasy]

https://fbcdn_sphotos_d-a.akamaihd.net/hphotos-ak-ash4/458180_3576919463660_146756945_o.jpg

[adamcs]

throttle body DBW or cable? cathedral ports on the intake? I'm starting to look for stock or near stock parts for the swap in the White X.

Its a dbw sir and its a ported ls2 manifold

[MustangEater82]

how much for the T56?

[adamcs]

how much for the T56?

t56 is gone

[Shane361]

Interested in the exhaust for a co-worker. Price?

[adamcs]

I will let the exhaust go for around 350 it has a bend in the tail pipe that looks easily fixed and needs new tips but other than that its fine, i also have american racing catted mids if he needs them

[adamcs]

And these prices arent firm so shoot offers if you need stuff

[Shane361]

Those rims were powdercoated right?? Cost? He might be interested.

[adamcs]

They were but i only have one good one lol so they are useless

[Shane361]

I will let the exhaust go for around 350 it has a bend in the tail pipe that looks easily fixed and needs new tips but other than that its fine, i also have american racing catted mids if he needs them

Midpipe cost? He is biting :cheers

[adamcs]

He can have the exhaust and midpipes for 500 stuff wasnt even on the car for a year, american racing catted midpipes

[Shane361]

He can have the exhaust and midpipes for 500 stuff wasnt even on the car for a year, american racing catted midpipes

So just replacing the tips will make the exhaust fine again?

[adamcs]

That and there is a bend on the driver side that needs to be fixed but it shouldnt cost much at all its not to bad of a bend, i will be at the shop tomorrow afternoon and all day saturday so he can come on by and look at it before he buys it.

[Shane361]

That and there is a bend on the driver side that needs to be fixed but it shouldnt cost much at all its not to bad of a bend, i will be at the shop tomorrow afternoon and all day saturday so he can come on by and look at it before he buys it.

Will let him know Adam and thanks. :cheers

[adamcs]

Not a problem at all just let me know if he wants to come by and check it out.

[cmd]

Not a problem at all just let me know if he wants to come by and check it out.

How much for whats left of the roller?

[adamcs]

Ill sell the roller with the full interior all computers and harnesses for 4k its a complete roller all it needs is a motor and trans and obvious body repairs which we priced at about 3g ish.

[ShawnBoyMoody]

Ill sell the roller with the full interior all computers and harnesses for 4k its a complete roller all it needs is a motor and trans and obvious body repairs which we priced at about 3g ish.

You are out of your gourd. You just purchased a sweet ass roller Camaro for 1500 bucks. How is a wrecked up (totaled) gto worth 4k?

[adamcs]

You are out of your gourd. You just purchased a sweet ass roller Camaro for 1500 bucks. How is a wrecked up (totaled) gto worth 4k?

Just the interior alone is worth about 2k there are wrecked gto's going for more than i am asking clean rollers go for 6 to 10k all day

[LXtasy]

https://erepairables.com/salvage/pontiac/gto
Adam's pricing is very good for what the car could be parted out for alone. His color and interior setup is what people are after.

Camaro and gto rollers are not the same.

[ShawnBoyMoody]

Im aware of that. Keep me posted as to what you get for it. Patrick is paying
.13 a pound right now.

[adamcs]

I dont want to junk it, after i had it looked at i realized that the damage wasnt nearly as bad as we initially thought and the truth is that it could easily be a very nice car again with not that much work im just more interested in racing at this point otherwise i would keep it and fix it later on, i havent even put this on any of the boards it has all been local because it will be hard for me to deal with shipping parts and all

[ShawnBoyMoody]

Just to be clear the car was totaled by the insurance company. This means the cost to repair the car exceeded its value. As far as the porno blue interior being worth 2000 I say to whom? How many of theses cars are running around with bad interiors? Its still practically new car. I could see it if you bagged the interior up for ten years and then sold it...

[ForceFed4g63]

Shawn is full of hate today lol

[adamcs]

I am basing my prices off of what the parts are selling for on ebay and the forums, and when they appraised the car they didnt take it apart he just looked at it and assumed that there was more damage than what there ended up being oh and the fact that they were using prices for gm replacement parts like a 900 dollar a piece fender that you can buy on amazon for 90 shipped. Fact is the car is worth what im asking.

[ShawnBoyMoody]

No hating I was taken back by the 4k price. GLWS kind sir.

[adamcs]

I understand that and im not trying to rape anybody with anything i am selling ive done the research and for the most part im selling stuff cheaper than what i have found.

[bwelch]

Just to be clear the car was totaled by the insurance company. This means the cost to repair the car exceeded its value. As far as the porno blue interior being worth 2000 I say to whom? How many of theses cars are running around with bad interiors? Its still practically new car. I could see it if you bagged the interior up for ten years and then sold it...

Alot of them came with black interior. Somebody with the black interior could want blue. I almost traded my red interior for blue interior. They are some of the most comfortable seats I have sat in. If I could find one cheap I would make a gaming chair with it, so I can gap some bitches on GT5...

[ShawnBoyMoody]

Alot of them came with black interior. Somebody with the black interior could want blue. I almost traded my red interior for blue interior. They are some of the most comfortable seats I have sat in. If I could find one cheap I would make a gaming chair with it, so I can gap some bitches on GT5...

HYHD.

[cmd]

Too rich for my blood. Thanks anyway GLWS

[adamcs]

Headers now for sale, american racing coated headers, will sell headers catted midpipes and spintech exhaust for 1000.

[oldskoolstang]

Can you take a couple more shots of the damage to the car for me? I'd like to see one from under the hood. Did the airbags deploy? do you have a title for the car, and is it a salvage title?

[adamcs]

I can get some pictures of it once im back in town but it is at hhp carolina if you are in the area and want to look at it, airbags did not deploy i do have a salvage title for it sitting at the house.

[ShawnBoyMoody]

I can get you some pictures this week Nathan. Im usually up there at lunchtime hanging out.

[oldskoolstang]

The car only has front end damage right? I noticed earlier in the thread you said that only one wheel was good. What happened?

[jmd]

Headers now for sale, american racing coated headers, will sell headers catted midpipes and spintech exhaust for 1000.

what size are the headers?

[adamcs]

The wheels are actually good just scratched the paint on one, there is some rear end damage also but not very major, john the headers are 1 3/4, and thanks Shawnboy

[adamcs]

The wheels are actually good just scratched the paint on one, there is some rear end damage also but not very major, john the headers are 1 3/4, and thanks Shawnboy

[adamcs]

The wheels are actually good just scratched the paint on one, there is some rear end damage also but not very major, john the headers are 1 3/4, and thanks Shawnboy

[2001hawk]

The wheels are actually good just scratched the paint on one, there is some rear end damage also but not very major, john the headers are 1 3/4, and thanks Shawnboy

Ok we get it already. Sheesh. LOL. J/K.

[adamcs]

Ok we get it already. Sheesh. LOL. J/K.

lol my phone apparently messed up i just saw this

[Matts94Z28]

$1 bob

[2001hawk]

$1 bob

I do what I can. LOL.

[adamcs]

Bump for headers and exhaust

[jmd]

did you post it on the gto site. b4z may want it.

[adamcs]

did you post it on the gto site. b4z may want it.

I knew i forgot something, ill do that today thanks for the reminder.

[BigdaddyDupree]

the guy i just had call you adam is pretty interested in exhaust and headers.

[adamcs]

the guy i just had call you adam is pretty interested in exhaust and headers.

Just talked to him a few min ago, thanks man

[BigdaddyDupree]

not a prob, im no asshole

[ForceFed4g63]

not a prob, im no asshole

I'm gonna need you to clean up this thread and apologize to Adam and to everybody else for wasting our time by helping him out.

[BigdaddyDupree]

im very sorry sir. i shall never do it again

[adamcs]

Lol or else

[adamcs]

Still have most of this shit for sale, front accessories are now for sale also so if you need anything pm me and we can work out a price, and if your interested in the roller also let me know and we can talk, i cant really deal with shipping and stuff at this point so just message me if your interested in anything and we will discuss pricing.