Mustang Question

[ForceFed4g63]

Are there any problems doing a V8 swap with a 4 cylinder mustang body?

[yota]

nope... people do it practically every day

[jmd]

you jumping to another car?

[ShawnBoyMoody]

Hoe snap. You've got a friend in the business.

[ShawnBoyMoody]

My red car was a cold ac 4 cylinder 5 speed car when I got it. Drove it home and ripped it apart.

[ForceFed4g63]

Hot damn. Got my eyes on a notchback for a project, Mr. Moody keep your phone on you lol.

[ShawnBoyMoody]

Hot damn. Got my eyes on a notchback for a project, Mr. Moody keep your phone on you lol.

Will do mildew.

[ShawnBoyMoody]

LS powa?

[ForceFed4g63]

LS powa?

Is there any other way? You and Rob have me convinced!

Like they say, if you can't beat 'em, join 'em.

I'm just looking around at the moment, would like to see if anyone wants to trade for my Talon once I get it running here in the next few weeks. If not, I'll just sell it and pick one up.

[ShawnBoyMoody]

Hot damn.

[chrisheltra]

Quit texting me about my 4V 5.0 mod motor.

[ShawnBoyMoody]

Lol.

[ForceFed4g63]

Lmao

[Shane361]

Notch is SEXY as HELL! Just need a Ford Racing Aluminator long block with a 2.8 Kenne Bell or some hairdryers. Stay true to the blue!

[ForceFed4g63]

Notch is SEXY as HELL! Just need a Ford Racing Aluminator long block with a 2.8 Kenne Bell or some hairdryers. Stay true to the blue!

You fund it I'll make it happen lol

[blubyu87gt]

Been mulling the idea of selling or parting the GT out... If you decide to go the 4 banger route let me know...

Also the four bangers normally Cosmetically iffy but structurally great. Hard to beat up on torque boxes and tweak frames with the pavement pounding 80hp they layed out lol

[Bradleyrj]

Theres a DOHC 5.4 from an Aviator for sale on southeasternfoxbodies for 800 bucks.. just saying.

[schardbody]

Theres a DOHC 5.4 from an Aviator for sale on southeasternfoxbodies for 800 bucks.. just saying.

why would he want to go slower than a cam only 5.3, have less parts availability, and spend more money?

LS is the way to go IF you are against SBF.

[blubyu87gt]

why would he want to go slower than a cam only 5.3, have less parts availability, and spend more money?

LS is the way to go IF you are against SBF.

:rollseyes:

[schardbody]

:rollseyes:

LOL!!!! i kid i kid, sad part is its true.

[Rattletrap]

make offer. all the hard work is done. going tonight to see what she does. full set plus 2 of ponys (with ET Streets), full set of SC Saleen 17x10 R and 17x9 F with and 2 more 9s.
iron 6.0, Livernois Heads, TSP Torquer 2 cam, FAST intake, 40ish Injectors. TH350 with Cameron's 3500 nitrous convertor. Nitrous Outlet Plate (plate is installed but the rest of system is not complete-its new and just needs to be hooked up).
Cobra R hood.
AJE K with AJE As. QA1 coil overs in front, one strut needs rebuilding ($80 @ NAAKE).
UMI Upper control Arms (installed) UMI Lower Control Arms to be installed.
UPR Bump Steer kit TBI
extra 8.8 to be built, have everything but the gear set (unless you want a 3.2x or 3.0x-think that's what sitting there)
UPR solid bushing for that 8.8 TBI

Has a radio that works :)

[ForceFed4g63]

make offer

Based on the extensive info you have provided...25 cents and a pack of gum. I've had some of the gum but there's still some left :D

[Rattletrap]

Based on the extensive info you have provided...25 cents and a pack of gum. I've had some of the gum but there's still some left :D:finger:
Just kidding :mrgreen:

[ForceFed4g63]

I'll trade you a 95 Eagle Talon TSi :D

[Rattletrap]

I'll trade you a 95 Eagle Talon TSi :D
If that's code for cash money then we can talk, otherwise :roll:

[ForceFed4g63]

If that's code for cash money then we can talk, otherwise :roll:

I figured as much lol, I have a feeling you're a bit out of my price range.

[Rattletrap]

I figured as much lol, I have a feeling you're a bit out of my price range.

You would be :eek2: I think, but maybe not.
just send me a PM and let me know what you think, I am very reasonable. Well, knowing what I have in the parts alone I would be reasonable.

[ShawnBoyMoody]

What the hell Shon?

[Rattletrap]

What the hell Shon?
Its what I do LOL

[chrisheltra]

Hard dick and bubble gum? I already chewed all the bubble gum though. :)

[ForceFed4g63]

You would be :eek2: I think, but maybe not.
just send me a PM and let me know what you think, I am very reasonable. Well, knowing what I have in the parts alone I would be reasonable.

I'll save you the trouble lol. I'm basically on a rolling shell budget, if I sell the Talon, I might be on a running heap budget. You have neither. Looks nice for sure though!

Hard dick and bubble gum? I already chewed all the bubble gum though. :)

Lol

[Rattletrap]

I bought the car for $1500, got it running, made vid of the 351 and 4speed ("top loader") which was a huge selling point until further inspection was a old truck 4 speed. Guy I bought it from had no clue, and you could tell.
Posted vid and sold the motor for $700 and the trans for $300, I have $500 in the 4cyl shell and since it had shiney paint I was happy. I have seen much worse for $500.
This is a 50ft car. it has runs in the paint and needs to be cut and buff but for $500 I am not complaining!!

[ShawnBoyMoody]

I want this. Just sayin.

[Matts94Z28]

http://www.horsepowerjunkies.com/forums/showthread.php?t=129681

[MonteC]

PM me a price shon.

[ShawnBoyMoody]

PM me a price shon.

HOE SNAP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Rattletrap]

Well it looks a little different now.....

[ForceFed4g63]

I think it just got in my price range!

[Rattletrap]

I think it just got in my price range!

:cry1:

[blubyu87gt]

Well that sucks... Sorry to see that....

[Rattletrap]

after I calmed down, that is exactly what I said....got out and saw the driver side and was OK with it, then saw the passenger side and said a bad word.

[LXtasy]

You and Ian have matching speed dimples

[ShawnBoyMoody]

Sorry that happened Shon. I will pour out a beer in honor of the coupe...

http://i80.photobucket.com/albums/j164/shawnboymoody/Pour-one-for-the-homies.jpg

[blubyu87gt]

That's pretty funny there Mr Hal.

Still drive that shit man. Adds to high speed stability. The women love it.

[LXtasy]

Bitches love speed dimples

[blubyu87gt]

True story. All the fast cars are getting them.

[Rattletrap]

I will have to someone look to see if the frame is OK. If so we prob just ride out! If not who knows.

[MonteC]

Story?

[1998ta__1991rs]

Story?

he wrecked the car

[MonteC]

he wrecked the car


Your Fupa is going to hurt when I see you.

[Rattletrap]

I had 20PSI in the tires and went 7.8 @90 off the trailer forgetting to shift DOH. Hot lapped it and got the shifts alot better to a 7.5 @ 95 with a 1.77. It was spinning so I knew there was more in it. I sat and watched a few cars and went back and lowered the pressure to 15 hoping it would stick...it did! felt good but noticed it was going left so I pulled it back to the right and I felt it get twitchy and then it goes L R L OH SHIT theres the wall...this is going to HURT....Right maybe I am OK and not going to hit the wall BAM...
Looked at it this AM, I believe it got the frame, got door gap that wasnt there before. Rear end looks like its cambered on one side.
SO, I am going to park it in the garage and chill out and sort things out.

[Harry]

Man, hate to here that. Atleast you were able to keep it from taking a hard hit and you are ok.

[Rattletrap]

yep, it could have been alot worse!
I will take to a frame shop to see how bad it is, gap now btwn the door and B-pillar that was not there before.

[Harry]

I don't know how much time you have in the car, but it sucks either way.

[Rattletrap]

I don't know how much time you have in the car, but is sucks either way.

bought it a year ago. worked on it as I had time....rollers are all over the place and many have shiny paint, I am a sucker for a shine LMAO

[1998ta__1991rs]

Your Fupa is going to hurt when I see you.

It better big boy

[2001hawk]

Sorry to hear you tagged the wall. Even though it doesn't sound like you had much money in it, still sucks.

[Rattletrap]

rtsp://v6.cache3.c.youtube.com/CjYLENy73wIaLQkjXLspeOtc7xMYJCAkFEIJbXYtZ29vZ2xlSA RSBXdhdGNoYLzmtpPEsoWLTQw=/0/0/0/video.3gp

[Stable]

sounds like it pulled the upper control arm mounts out.......

[Rattletrap]

sounds like it pulled the upper control arm mounts out.......On the launch? or when it hit?
Either way I got to figrue out what the issue is.
Mounts being pulled out would explain the way the rear end looks like it sits now which didnt hit anything, too far back and if they pulled out on one of the previous runs that would explain why car didnt act like I thought it would but I did get pretty far out of the groove trying to drive it....

[Stable]

launch....it causes them to wiggle real bad....Mine did it at ATL many years ago.....If I had been at a smaller track it would have been in the wall...theres only a few spot welds that holds the upper mount in