Set The Record Straight

[CHEVYMAN434]

I just want to set the record straight. Im sure most of you know that my car was at HHP ans it encountered problems..Well the biggest of them all is that i had 3 broken pistons and the engine had to be torn down and discarded...So,with that im not sure who's fault it is or what may of happened but i am gonna just be done with that situation and not play the blame game with anyone. It is what it is and of course it sucks but it opened my eyes to a new set of problems with the build...With the bottom end down i could clearly see that the pistons have never really fit right. It looks as if they were never really seated at all. Also, the bearings are wiped out in the bottom end completely...It seems the machine shop i used really didnt do the good job i thought they did,because the engine only had 21 passes on it..I thought that it was all checked out just to be sure it was ok but i guess i was wrong.. So really the first time i would have shot it,it would have come apart in a major way. So with that i want to say that there is no hard feelings with anyone and i will have a new "BAD ASS" bottom end delivered this week... So beware as it will be done in a matter of weeks now....I have my sights on another camaro that should be done about he same time....lol

[BAD BOB]

going after curtis first? car going to be a drag radial car or you run slicks?

[adamcs]

lol I hope your talking about mine, that would be fun

[CHEVYMAN434]

going after curtis first? car going to be a drag radial car or you run slicks?

It will primarally be run on slicks, and cant run Curtis first...lol then i will never get a race off...Im not gonna give anything to anyone but will not be askin for anything either...I would like to run Adam right off though....Then a boy from my town with a big block back half mustang...I want to get him for a lick!!!

[adamcs]

Lol sounds good, now let's hope I can get my junk goin, should be very soon though

[CHEVYMAN434]

Save your money also.I'd like to recoup my losses quickly....lol

[adamcs]

We will talk when the time comes, hell I don't even know what bottom end you are puttin in that thing, but ill see what my stock block stock headed car will do

[CHEVYMAN434]

I actually changed the cam and the whole setup in general.I wasn't gonna get to where i needed with the other stuff...Mine's stock bottom end also now....

[adamcs]

Well when we both get the cars right let's do the damn thing, I'm not scared of a race, if nothing else it will be a good one to watch

[2001hawk]

I just want to set the record straight. Im sure most of you know that my car was at HHP ans it encountered problems..Well the biggest of them all is that i had 3 broken pistons and the engine had to be torn down and discarded...So,with that im not sure who's fault it is or what may of happened but i am gonna just be done with that situation and not play the blame game with anyone. It is what it is and of course it sucks but it opened my eyes to a new set of problems with the build...With the bottom end down i could clearly see that the pistons have never really fit right. It looks as if they were never really seated at all. Also, the bearings are wiped out in the bottom end completely...It seems the machine shop i used really didnt do the good job i thought they did,because the engine only had 21 passes on it..I thought that it was all checked out just to be sure it was ok but i guess i was wrong.. So really the first time i would have shot it,it would have come apart in a major way. So with that i want to say that there is no hard feelings with anyone and i will have a new "BAD ASS" bottom end delivered this week... So beware as it will be done in a matter of weeks now....I have my sights on another camaro that should be done about he same time....lol

Rep for trying to clear things up. Sux about the motor though.

[oldskoolstang]

Sucks that the bottom end was trashed. A friend of mine had a similar problem years ago and refused to admit it. He kept messing with the tune on the car and couldn't figure out why it wouldn't run right. We finally convinced him to tear it down to try and find something wrong. 3 broken Probe pistons. Shit happens. It shows a lot to me for you to try and clear things up and not blame anyone that was working on the car. Props to ya man.

[blueyed tuner]

I just want to set the record straight. Im sure most of you know that my car was at HHP ans it encountered problems..Well the biggest of them all is that i had 3 broken pistons and the engine had to be torn down and discarded...So,with that im not sure who's fault it is or what may of happened but i am gonna just be done with that situation and not play the blame game with anyone. It is what it is and of course it sucks but it opened my eyes to a new set of problems with the build...With the bottom end down i could clearly see that the pistons have never really fit right. It looks as if they were never really seated at all. Also, the bearings are wiped out in the bottom end completely...It seems the machine shop i used really didnt do the good job i thought they did,because the engine only had 21 passes on it..I thought that it was all checked out just to be sure it was ok but i guess i was wrong.. So really the first time i would have shot it,it would have come apart in a major way. So with that i want to say that there is no hard feelings with anyone and i will have a new "BAD ASS" bottom end delivered this week... So beware as it will be done in a matter of weeks now....I have my sights on another camaro that should be done about he same time....lol

Was the engine assembled by a machine shop or an individual engine builder ? The reason I ask is the engine builder is responsible for the fit and putting it together. The machine shop usually deals with machining parts. Whom ever assembles the engine has the last say. If a piston or bearing didn't fit right the assembler should have caught it. Sometimes the mach shop gets a bad rap for the assemblers crap ! Just my 2 cents.

[CHEVYMAN434]

Yeah,the engine builder was the machine shop too. They did it all there and was supposed to be LS dudes,,,,so who knows anymore..Ima just stick with RPM for now. I seem to be getting results so im gonna go with it and see what happens..I guess it will either run good as hell,or blow up really quickly..It will be run to break the cam in,and then its off the the track for some Nitrous passes.I dont even care what it runs on motor so im just gonna start out with n20 passes.. But the shop was up in greer...Damn upstate struck me down!!!! lol

[RobertHolton1]

It will primarally be run on slicks, and cant run Curtis first...lol then i will never get a race off...Im not gonna give anything to anyone but will not be askin for anything either...I would like to run Adam right off though....Then a boy from my town with a big block back half mustang...I want to get him for a lick!!!

Get this straight his car Is stock suspension and we are waiting on u shoot shoot or Motor motor... Tick tock tick tock

[DIGGLER]

what was the shop in greer? cant think of any LS1 specialists in greer... lol

[GreebeanZ28]

what was the shop in greer? cant think of any LS1 specialists in greer... lol

Lol. You mean B&M that does certain white turbo camaros isnt worth a shit?

[CHEVYMAN434]

Get this straight his car Is stock suspension and we are waiting on u shoot shoot or Motor motor... Tick tock tick tock

I will take shoot to shoot....Soon as its ready im gonna broke yall boys........So tell all them nut huggers to come and please get the pot up..I really in need of it..Cause one thing is for sure,fact of all matters,is that Jason Yella Hill will never go faster than me in any car....FACT!!! Espicially with no POS ford.... And while we talkin real,,,once i get used to my car,which i will on the two as mentioned previously,i will just be waiting for yalls camp to overstep your bounds also....So we will see....

[slowgreen99]

Ho snap

[slowgreen99]

Who's driving either car?

[CHEVYMAN434]

Ima drive mine,and Jason to drive his......

[CHEVYMAN434]

Lol. You mean B&M that does certain white turbo camaros isnt worth a shit?

I dint say they were not worth a shit,But im going on what RPM told me..And yes it was because of a white turbo car i went there..They were nice guys and all,but all of a sudden another engine builder says all the holes are out of round and the bearings are shot with 21 passes on it.....But i dont ever care really,i just wont take it back.....

[slowgreen99]

Cool deal

[RobertHolton1]

Call me ashley

[DIGGLER]

man it sucks you hauled that motor all the way up here because of the white camaro guy. he went through at least 4 motors that i can remember in the last 2 years or so, and that is no exaggeration. half of it probably his tuning, and the other half was obviously that machine shop. he sold one of those motors to a guy on LS1tech and it wouldnt even turn over by hand. chris burned him hard on that deal. matter of fact, was all your stuff YOURS? or did you by chance get some of chris's old stuff? he is a well known scammer if you search his name on ls1tech, some truck forums, and yellowbullet you will find all kinds of bad stuff.

[GreebeanZ28]

^^^guy is speaking the troof.

[BAD BOB]

I actually changed the cam and the whole setup in general.I wasn't gonna get to where i needed with the other stuff...Mine's stock bottom end also now....

That's a good one!

[silver455]

^^^guy is speaking the troof.

preaching from the bleachers lol

[CHEVYMAN434]

Damn,i had no idea about them up there. It was all my stuff i took up there and man the dude talked real good and i felt good about it all... But all the crap work showed its head now,so i just have to chalk that one up to the game....I cant believe it ran like it did with the cylinders out of round like that...Fucker ran 5.70's on one system....Let me get 8 good cylinders under it now and wow,its gonna be on!!

[CHEVYMAN434]

Call me ashley

PM me ur number bubba.....

[GreebeanZ28]

preaching from the bleachers lol
Lol ive made passes more recently than turboman has.

[slowgreen99]

5.70s?! Damn! That's rollin

[RoadconeTuning]

man it sucks you hauled that motor all the way up here because of the white camaro guy. he went through at least 4 motors that i can remember in the last 2 years or so, and that is no exaggeration. half of it probably his tuning, and the other half was obviously that machine shop. he sold one of those motors to a guy on LS1tech and it wouldnt even turn over by hand. chris burned him hard on that deal. matter of fact, was all your stuff YOURS? or did you by chance get some of chris's old stuff? he is a well known scammer if you search his name on ls1tech, some truck forums, and yellowbullet you will find all kinds of bad stuff.


Its about time for him to find this board and make a rage filled post telling everyone to come to his house.

[slowgreen99]

Same guy I called out on yb?

[DIGGLER]

Its about time for him to find this board and make a rage filled post telling everyone to come to his house.

ya no kiddin. he's still convinced people hate on him because of how fast his car has been, how big his house is, and all the stuff he has. everyone is just a jealous hater.

[GreebeanZ28]

Lulz.

[RoadconeTuning]

ya no kiddin. he's still convinced people hate on him because of how fast his car has been, how big his house is, and all the stuff he has. everyone is just a jealous hater.

(breath)STFU YOU HAVENT MADE A PASS IN 674 YEARS AND DONT GO MID FIVES WITH A HUGE CARB.T MOTOR!

Hey could you come over and help me figure out this new MSD ignition box?(/breath)

idk who you called out but heres a nice little link to some google syntax to see the latest YB happenings of the white camaro owner

https://www.google.com/search?q=cjg454ss+site%3Ayellowbullet.com&rlz=1C1CHFX_enUS488US488&oq=cjg454ss+site%3Ayellowbullet.com&sugexp=chrome,mod=0&sourceid=chrome&ie=UTF-8

[Yella]

I will take shoot to shoot....Soon as its ready im gonna broke yall boys........So tell all them nut huggers to come and please get the pot up..I really in need of it..Cause one thing is for sure,fact of all matters,is that Jason Yella Hill will never go faster than me in any car....FACT!!! Espicially with no POS ford.... And while we talkin real,,,once i get used to my car,which i will on the two as mentioned previously,i will just be waiting for yalls camp to overstep your bounds also....So we will see....

First of all I'm not talking shit an my name comes up, well I tell ya what I hope u got more than a 5.70 i can just run motor an u want me to shoot so until u get your pos running I would be quiet , try a little less nos an it mite not blow up before u get to run I been hearing this shit for a year now

[BigdaddyDupree]

SUP yella?

[1SMKN99]

First of all I'm not talking shit an my name comes up, well I tell ya what I hope u got more than a 5.70 i can just run motor an u want me to shoot so until u get your pos running I would be quiet , try a little less nos an it mite not blow up before u get to run I been hearing this shit for a year now

http://i.imgur.com/eSX5q.gif

[CHEVYMAN434]

First of all I'm not talking shit an my name comes up, well I tell ya what I hope u got more than a 5.70 i can just run motor an u want me to shoot so until u get your pos running I would be quiet , try a little less nos an it mite not blow up before u get to run I been hearing this shit for a year now

I know,but my car kept on breakin...lol...Im 3 weeks away and hope there is nothing left to break.Its all new for the second time this year.This one year it has costed me about 40k and thats hard to do when your not workin,but its a wrap now...It did more sittin than gettin worked on all year really..Im just tryin to make sure your still ready cause im so ready to get this race off...So i will holla soon,glad you joined on here too...

[Yella]

I know,but my car kept on breakin...lol...Im 3 weeks away and hope there is nothing left to break.Its all new for the second time this year.This one year it has costed me about 40k and thats hard to do when your not workin,but its a wrap now...It did more sittin than gettin worked on all year really..Im just tryin to make sure your still ready cause im so ready to get this race off...So i will holla soon,glad you joined on here too...

I only joined to defend myself u know I'm not a shit talker I still have to test my car on the gas but by the time u get ready I'll be around it's been fast enough on motor for me right now need to go to a good track to test not Dorchester

[CHEVYMAN434]

I know bubba...I consider you my friend but you know how we do with these cars...I wouldnt even mess with you if you didnt have a mustang...lol...But yeah,just let me get my pile together and i will call ya....Im not even gonna run my shit at dorchester...Gonna stick with darlington,O'burg,SGMP..looks good too...

[CHEVYMAN434]

This was yella and us a couple years ago with a different car...http://www.youtube.com/watch?v=ygqrkDr1euk

And again http://www.youtube.com/watch?v=t95iwYUmgjE

[Yella]

Too bad u wasn't driving had a 140 pound fag in there

[CHEVYMAN434]

Damn bubba,,you rough.....lol ...The weight factor wont matter a bit this time cause im makin so much power i could put your friends in the car with me and still pat the gas..And im down 50 lbs and counting so we not far off now anyways..I'll be drivin next time though maybe... Got to get in it and see if i like it...I should,just my health been very bad thats why i didnt drive the car the last two years....But im getting a double knee replacement and back surgury beginning of next year,maybe that will help me some....I could get in the car and all,just not very fast at it...I was worried about wrecking it and i couldnt get out if it cought fire.....But i sure i can swing it to beat up on a mustang or to......:poke:

[Yella]

Just turned down 18,000 for my car but I'm gona keep it just long enough to bust dat ass I don't wanna post my dyno sheets I don't think u can count that high or can u count over 1,000

[CHEVYMAN434]

Sounds good boss. We'll hook it up soon....I dont wanna beat up on ya like i am,but i have to do it just because my kids want me too..They enjoy our little rivalry......Idk how it got this way but everyone around here allways talks shit everywhere i go....They seem to believe in you but ima have to settle them down....lol...And 1k hp aint shit nowdays....Thats where i am then i turn on the gas...lol

[Yella]

I guess we will see u turning me into a shit talker

[CHEVYMAN434]

LOL....dont let it get to ya buddy...You should feel cofident....I know your car is very fast with a powerfull big block in it...Mine is just a hodge podge small block street car..