ATI Pin Kit

[FRDnemesis]

Does anyone have an ATI pin kit PT# 918993 that I can borrow?

Thanks,
Jeff

[Carlrx7]

i have an A&A pin kit, is it the same?

[FRDnemesis]

i have an A&A pin kit, is it the same?

Do you know who makes the pin kit A&A sells? I guess I could call them Monday morning to see if it will work with my crank and just order a pin from them if your kit will work. :cheers

[Carlrx7]

Do you know who makes the pin kit A&A sells? I guess I could call them Monday morning to see if it will work with my crank and just order a pin from them if your kit will work. :cheers

I'm sure you could source a dowel pin locally.

[Carlrx7]

http://www.aacorvette.com/performance/index.php?main_page=product_info&cPath=2_32_116_49&products_id=69

are you using an ati balancer?

[FRDnemesis]

http://www.aacorvette.com/performance/index.php?main_page=product_info&cPath=2_32_116_49&products_id=69

are you using an ati balancer?

Yes, PT# 918620

If you have a fixture that I can borrow, all I'll need to buy is a pin and the drill bit.

[Carlrx7]

the LS7 kit seems the same but just uses Longer bolts, so if you have the bolts shoot me a text before you want to swing by and pic it up.

One thing to i stress is make sure the new pulley is all the way seated on before you pin it, nothing worse than pinning the balancer that isn't all the way on.

-Carl

[oldskoolstang]

nothing worse than pinning the balancer that isn't all the way on. -Carl

So true.

[FRDnemesis]

the LS7 kit seems the same but just uses Longer bolts, so if you have the bolts shoot me a text before you want to swing by and pic it up.

One thing to i stress is make sure the new pulley is all the way seated on before you pin it, nothing worse than pinning the balancer that isn't all the way on.

-Carl

At 240 ft/lb.'s I am pretty sure it's seated properly :D

I'll call A&A tomorrow to verify any diff's. thx Carl!