PDA

View Full Version : Battery relocate


03SVTCOBRA
05-12-2013, 12:35 PM
Wanting to possibly do this to free up some engine space since its so cluttered. You guys using a kit or just buying the wire? I was just going to pick up some wire and do it without paying for a kit. What thickness of wire and where can i find it??? Whats the best place to ground to in the trunk area?

BigdaddyDupree
05-12-2013, 12:47 PM
buy the kit. from jegs or summit with the box and cable

Darryl Buckner
05-12-2013, 12:52 PM
buy the kit. from jegs or summit with the box and cable

This. Then go through trunk floor and grind off a spot on the frame rail to ground to.

03SVTCOBRA
05-12-2013, 12:58 PM
100+ bucks, i thought i could do it cheaper with much thicker wire. Maybe not. I already got a box.
Was going to maybe pick this up???
http://www.ebay.com/itm/SGX-1-0-AWG-GAUGE-BLACK-STRANDED-SAE-J1127-AUTOMOTIVE-WIRE-25-BATTERY-CABLE-/350770399792?pt=LH_DefaultDomain_0&hash=item51ab8b8a30

BigdaddyDupree
05-12-2013, 01:09 PM
http://www.jegs.com/i/JEGS+Performance+Products/555/10275/10002/-1 buy this, thank me later

03SVTCOBRA
05-12-2013, 01:11 PM
Yes Sir.

BigdaddyDupree
05-12-2013, 01:11 PM
im serious, i know where you live

lilpanther
05-12-2013, 04:24 PM
All I did you wire was buy some 1/0 welding leads from air gas and my grandfather got a battery box from one of his friends for me. It took about 17 feet to run from the back of the hatch in the fox body to the starter solenoid up front.

DIGGLER
05-17-2013, 09:22 AM
All I did you wire was buy some 1/0 welding leads from air gas and my grandfather got a battery box from one of his friends for me. It took about 17 feet to run from the back of the hatch in the fox body to the starter solenoid up front.

this is what i would do. for a street car especially... i would go on the thick side with the cable. cant remember what comes in the jegs kit, but seemed like it was 2ga. or 4 ga. i would get 1/0 from a welders supply place. you can get a battery box from jegs or even walmart.

1998ta__1991rs
05-17-2013, 09:24 AM
leave it in the front

DIGGLER
05-17-2013, 09:25 AM
leave it in the front

or this. lol

slowgreen99
05-17-2013, 10:41 AM
Buy the UPR kit. Comes with everything and looks good, not too bad in price either

silver455
05-17-2013, 11:00 AM
Didn't buy a kit i used some 1/0 car audio cable i had laying around from my youth

03SVTCOBRA
05-17-2013, 02:30 PM
Already moved it. Freed up a ton of room up front. Still got a few wires to run but i went with the jegs cheap one. If i need to upgrade the wire later i will.

BIRDMAN
05-17-2013, 02:34 PM
Just get a Monaroo battery.