Need to borrow some spanner wrenches

[Bradleyrj]

Spanner wrenches.. Put my strange stuff on this weekend with the new K member but sitting way to low now and my stuff didnt come with any wrenches. Anyone have a set I can borrow for a day or two. Dont really want to buy a set right now since i dont have any other springs to swap around anyway. I'll buy some when I have a need for them more than once a year.

Thanks,
Brad

[04ctd]

post a pic of what you need.

i have a pair for motorcycle stuff IDk if they will work

[Bradleyrj]

http://www.summitracing.com/parts/str-s1413?seid=srese1&gclid=CL3IzZzNjbwCFYNi7Aod0SoAGQ

[blkscls1z]

I have some QA1 wrenches. If they will work for you, you can borrow them.

[AverageJoe]

I used this: http://www.lowes.com/pd_36_0__?productId=3220007

[03SVTCOBRA]

I have 2 qa1 wrenches also. they have more teeth than that though so it may not work. Never even used mine yet...

http://i1085.photobucket.com/albums/j439/cobralover18/SAM_1340_zpsacca1c27.jpg

[FRDnemesis]

Spanner wrenches.. Put my strange stuff on this weekend with the new K member but sitting way to low now and my stuff didnt come with any wrenches. Anyone have a set I can borrow for a day or two. Dont really want to buy a set right now since i dont have any other springs to swap around anyway. I'll buy some when I have a need for them more than once a year.

Thanks,
Brad


I have a set Brad. What size do you need?

[Bradleyrj]

I'll measure later this evening and post back up.

[Miker]

I always throw the spanner wrenches in the corner and use a hammer/punch to tighten them.

[FRDnemesis]

I always throw the spanner wrenches in the corner and use a hammer/punch to tighten them.

If you use Torrington bearings in the seats like I did on my QA1's, it takes minimal effort to spin them with a spanner. I've had to use a punch before I installed the bearings.

http://i15.photobucket.com/albums/a389/FRDnemesis/Torringtonbearing_zpsee76602a.jpg (http://s15.photobucket.com/user/FRDnemesis/media/Torringtonbearing_zpsee76602a.jpg.html)

[Bradleyrj]

I have the Torrington bearings in and adjusted them as much as I could just turning them up by hand but as of right now i'm still about 2 inches low on ride height.

[FRDnemesis]

I have the Torrington bearings in and adjusted them as much as I could just turning them up by hand but as of right now i'm still about 2 inches low on ride height.


Copy that. Are you going to be in the area anytime soon? You can swing by and pick them up.

[Bradleyrj]

I'll be in town tomorrow, just not sure exactly where and what my schedule will be.

[FRDnemesis]

I'll be in town tomorrow, just not sure exactly where and what my schedule will be.

I'll put them in the truck. Do you still have my cell #?