Allusa motorsports dyno day

[jeff@allusa]

First Open Dyno Day September 26 2009

If you have ever wanted to know much horsepower your vehicle makes this is the event for you!



This event is open to all makes and models. (No AWD Vehicles or Duallies)

We will kick off this event at 10:30 and run until everyone that wants a dyno pull has one.

Dyno fees will be 3 back to back pulls for $50.00.

Dyno waiver will need to be filled out before any pulls are made!

Allusa Motorsports is located at 3514D South Live Oak Dr. Moncks Corner S.C. 7 tenths of a mile from Carnes Cross roads on the right heading to Moncks Corner.

Call Jeff Hunter Or Ted Harris For more info.

843-761-7560 or toll free 866-402-4480

[Illusions]

sounds good, I'd like to see if anything has changed with my LTCC fixing a few misfires.

[ElecTech]

sounds good, I'd like to see if anything has changed with my LTCC fixing a few misfires.

Nope.... still an LT1! :bigthumb:




Actually, I'm a little curious myself.

[LXtasy]

u guys driving the vehicles

[Illusions]

Nope.... still an LT1! :bigthumb:




Actually, I'm a little curious myself.

I'm really interested in how the upper rpm's are. from the dyno sheets it looked like it was getting interference. just curious if it smoothed anything out. :)

[Magoo]

Dyno include AFR?

[91notch]

I gonna try and make it.

[minytrker]

Dyno include AFR?

Im 99% sure but may want to call them and double check.

[minytrker]

Guys,

All USA bought all my equipment from, dyno included. So all the guys that did dyno runs over at my old shop (ls1powertuning) can use there dyno now to keep track of your gains since its the same dyno as your baseline pulls. Jeff and Ted at All USA are great guys and have a really nice shop. I have had a few freinds over there in person and they all couldnt say enough about how nice there setup is. So if you havent had a chance to check out there shop please go by and check them out. If it wasnt a 18hr drive I would be there forsure.

I hope someone posts some pics and video for those of us that cant make it.

[LXtasy]

hopefully i can break free and head over there. will get video if i remember.

[Illusions]

If my truck is back together I will be there. I just can't guarantee anything.

[Matts94Z28]

I may head out and throw the 01 on the rollers.

[LXtasy]

I may head out and throw the 01 on the rollers.

all lies

[Matts94Z28]

http://i28.photobucket.com/albums/c219/Matthew103/img1252869850150.jpg

[LXtasy]

http://i28.photobucket.com/albums/c219/Matthew103/img1252869850150.jpg

photoshopped

[Illusions]

That has to be a pic of Greg's engine bay. certainly its not yours...lol

[soccerspike15]

i might come out in a red car....

[79bluebird]

i not bring my s10 back out next time something of mine go's back on the dyno i plan to lift cylinder heads with 20lbs of boost.

[SLOWGREEN73]

i might come out in a red car....

unicorn

[red99pony]

i will stop by Dave are you going to be there?

[Silver-Dollar]

I will try to make it as well. Wife has a heart walk benefit in Chareston in the morning. Chances are slim for me breaking away. I would bring the family out. But, it would just give her another reason to complan about my truck.

[DolSVT00]

Bump

[jeff@allusa]

From what we are hearing it should be a great turn out, so if you guys can make it should be a great time.

Jeff

[Magoo]

I should be there.

[blkscls1z]

Dyno include AFR?

Did anyone find out a definite answer?

[jeff@allusa]

Did anyone find out a definite answer?

The dyno will include a/f.

Jeff

[LXtasy]

WHo is driving them on the dyno?

[ElecTech]

WHo is driving them on the dyno?

No, Who's on first. :bigthumb:

[LXtasy]

dick :).

[Red99T/A]

dick :).

nope, dicks pitching......

[Harry]

If noone knows who's on first and Dicks pitching, Then who will be driving the cars? If Dick does end up driving the cars, I don't know if I what Dick driving. Last time I let a Dick drive my car it ended up in a ????????

[ElecTech]

If noone knows who's on first and Dicks pitching, Then who will be driving the cars? If Dick does end up driving the cars, I don't know if I what Dick driving. Last time I let a Dick drive my car it ended up in a ????????


nice.:mrgreen:

I would assume it would be one of the ALLUSA staff doing the driving.

[LXtasy]

was wondering mainly for those who have nitrous on a button instead of wot switches etc. two handed racing ftw

[BAD BOB]

i got one on a WOT switch, one on a button and the third on a timer what uses the throttle switch and button

[LXtasy]

i got one on a WOT switch, one on a button and the third on a timer what uses the throttle switch and button

kitchem timer ftmfw

[Ballaholic29414]

I bet the wait will be hours so pack ur lunches

[Red99T/A]

Jeff, will you guys be able to accept plastic as a form of payment for the dyno?

[Mike]

I bet the wait will be hours so pack ur lunches

:bigthumb:

That's the fun part of a dyno day. Sitting around BSing with a bunch of other car guys. :cheers

[Illusions]

:bigthumb:

That's the fun part of a dyno day. Sitting around BSing with a bunch of other car guys. :cheers

or truck guy/gals. ;)

[79bluebird]

i may swing by buy that means i would have to stop the paint work for illusions blazer.

[Robert Holton]

kitchem timer ftmfw

i had a car one time on a kitchen timer, when that thing dings u better hold the hell on haha

[slowgreen99]

i had a car one time on a kitchen timer, when that thing dings u better hold the hell on haha

:hysterical:

[Red99T/A]

Jeff, will you guys be able to accept plastic as a form of payment for the dyno?

Still no answer on this.....Anybody know for sure? :confused:This is pretty much the dealbreaker for me.

[SLOWGREEN73]

why not use cash

[Pesce Nero]

jeff, do you accept food stamps?

[Red99T/A]

why not use cash

No cash....was unemployed for over a month up until this week....bank account is at $0.00. But I do have plastic! :bigthumb:

[ElecTech]

No cash....was unemployed for over a month up until this week....bank account is at $0.00. But I do have plastic! :bigthumb:

Yikes dude! You may wan't to just watch. It's really not that important you run your car.

However, if you choose to, I'm pretty sure they will. They have the ability to take plastic.

[Pesce Nero]

one big happy family

tator tot, superman, slowgreen, bad bob, zack, wtfwsat and 91notch all recieving one and the break from kryptonite

http://i40.photobucket.com/albums/e225/sixpackgut/dynoday010.jpg

[91notch]

LoL @ the picture. I had a good time today good seeing/meeting everyone.

[DolSVT00]

LoL @ the picture. I had a good time today good seeing/meeting everyone.

+1

[BAD BOB]

and he was saying he would race us with someone elses car!!!! GO FIGURE :hysterical:

[Red99T/A]

Dyno Day = Epic Fail for me.

[Harry]

Dyno Day = Epic Fail for me.

I guess you didn't get to go.

[Pesce Nero]

Dyno Day = Epic Fail for me.

your epic fail turned into my Fail

[Red99T/A]

your epic fail turned into my Fail

hows that?

[Pesce Nero]

hows that?

your massive amount of horsepower flowing thru your exhaust burnt the straps so i couldnt get on the dyno

[Red99T/A]

your massive amount of horsepower flowing thru your exhaust burnt the straps so i couldnt get on the dyno

Shit, sorry dude, been a pretty shitty day for me so far, just waiting for more things to go wrong at this point.

[Pesce Nero]

Shit, sorry dude, been a pretty shitty day for me so far, just waiting for more things to go wrong at this point.

no big deal, i didnt have the money anyway

[ElecTech]

I had a good time, as well. Nice to put some faces to the names. I'd like to thank everyone for the opportunity to get my hands on some really nice street machines.


I wish some more of those so-called "Fast GM's" would have come out, but I guess most of them are still on jack stands. :poke:

[LXtasy]

Sucked for us too. More nitrous was spraying the water pump than actually going into the intake :( Found the problem and it will be fixed. Damn braided lines getting cut .

[Illusions]

^^^ x2

We found we need to fix a few things and get back with the tuner again. Hopefully he will stay State side for when we are done with the repair job.

One more "NOT SO" fastgm going on jackstands. :(

I honestly think mine was the lowest numbers again.

[jeff@allusa]

I want to Thank everyone that came out to our first dyno day. We had a great time. The cars and trucks were awesome and the bench racing was off the hook!

We would like some feed back from those of you that attended.

Please let us know how you thought the event was run, what you thought was good and what you think we can improve on.

Thanks,

Jeff

[LXtasy]

I am telling you Jeff. Everytime me and Marcus talk he has to give me 3 and the break so I can out talk him

[DolSVT00]

I want to Thank everyone that came out to our first dyno day. We had a great time. The cars and trucks were awesome and the bench racing was off the hook!

We would like some feed back from those of you that attended.

Please let us know how you thought the event was run, what you thought was good and what you think we can improve on.

Thanks,

Jeff

I had a good time, the shop was def. not what I expected, its real nice I had no idea until yesterday. I didn't even know there were buildings back there.

As for what to improve on, I've been to dyno days before, and I know the speed of the event all depends on the equiptment. I know yall did your best, so while others may complain about the wait I'll just say I wish there were more chairs to sit in, I braught my own and didnt mind if others sit in them , but im sure that some didn't want to sit in them because they didn't know who they belonged to.

Also, dyno numbers. I know some would want to be secretive about what their cars/ trucks made and thats cool but maybe next time (if the owners approve of them to be public), you could have a dry erase board or white board or something with the vehicle type and the numbers it made, so everyone could see. I know I wouldnt have had a problem with it.

All in all I had a good time, I just wish I could have got my nitrous worked out and got some data from it, but there's alwayse a next time.

Again, thanks

[ElecTech]

Also, dyno numbers. I know some would want to be secretive about what their cars/ trucks made and thats cool but maybe next time (if the owners approve of them to be public), you could have a dry erase board or white board or something with the vehicle type and the numbers it made, so everyone could see. I know I wouldnt have had a problem with it.

Again, thanks

I'm thinking big screen near the spectator area. :cheers

[LXtasy]

i could have brought my 42" if I would have known :D

Randy, our nitrous wasn't acting right either. i know the pain.

[79bluebird]

so what were the dyno numbers for the blazer?

[LXtasy]

231.57 hp 301 tq MOTOR

NITROUS....well with it spraying all over the waterpump and not getting into the motor. Have video and you hear it rushing all over the motor was 284.31 hp and 344.07 TQ

Telling ya. Its a turtle. Why hide it

[79bluebird]

still makes more power then my 203. hp.

[LXtasy]

not by much.

[Illusions]

I'm just going to put more vinyl on the blazer to help with its HP/TQ numbers. damn 6cyls. We even tried weight reduction and left the hood grill bumper and airdam at 79bluebirds house. it still didn't help. :?

I'm hoping to redeem ourselves at the next one.

[Matts94Z28]

I'm just going to put more vinyl on the blazer to help with its HP/TQ numbers. damn 6cyls. We even tried weight reduction and left the hood grill bumper and airdam at 79bluebirds house. it still didn't help. :?

I'm hoping to redeem ourselves at the next one.

I don't think that will be a problem :bigthumb:

[Red99T/A]

Are we sure the trans fluid came from my car? It was dry before and after.....

[DolSVT00]

Are we sure the trans fluid came from my car? It was dry before and after.....

???? who said anything about trans fluid?

[Red99T/A]

after my dyno pullls there was a puddle of trans fluid under the lift, not sure if it was already there or if it came from my car, because like I said it was dry before, dry after, and dry since....:confused:

[Illusions]

did your car get nervous and piss on the floor while it was on the dyno? :hysterical:

[Red99T/A]

did your car get nervous and piss on the floor while it was on the dyno? :hysterical:

That would explain the piss-poor numbers......:barf:

[BigdaddyDupree]

or it being a stock car could also explain em lol just kidding

[red99pony]

+1 on posting the number and more chairs. maybe selling a few drinks and snacks would be a good idea also. all in all the day seemed to go well, especailly considering you guys are still working out a few kinks. had a great time thanks :bigthumb:

[Robert Holton]

+1 on posting the number and more chairs. maybe selling a few drinks and snacks would be a good idea also. all in all the day seemed to go well, especailly considering you guys are still working out a few kinks. had a great time thanks :bigthumb:

yea i was hoping there would be snacks there, but one quick call to the pizza guy and i had snacks there speedy quick,

[jeff@allusa]

Are we sure the trans fluid came from my car? It was dry before and after.....

We wiped up under the lift after every car came off the dyno. I guess we could have missed a spot. :shock:

[Red99T/A]

We wiped up under the lift after every car came off the dyno. I guess we could have missed a spot. :shock:

weird, cuz there hasn't been a drop from it since, even where sat right after the dyno pulls was dry when I went to leave. Not even a drop on the garage floor since I got home, still have to get the car in the air, but I'm convinced it couldn't have been my car. Still has me worried though...

[jeff@allusa]

If you would like to bring your car by,we will put on the lift for you and both of us can have a look.

Jeff

[Red99T/A]

I might have to do that. Thanks Jeff!

[jeff@allusa]

No problem. Just give us a call and let us know that you are coming.

Jeff

[Red99T/A]

I'll probably be calling you around lunch time today to set up a time to come see you. Thanks again!:yourock:

[jeff@allusa]

Sounds good.

Jeff