spearco air.water

[s14.5gonewide]

m selling a Spearco full custom A/W TMIC.. This IC is a one off custom fabed by Fast Lane Motorsports.. This setup will use ice water to cool the IC and has a drain fitting to release unused water and utilizes a vented cap to fill the resevoir with ice water.. The water core will hold about 4 Gallons of ice water.. The measurements are 27x12x20 (length X width X height).. The IC core is 5" thick.. The endtanks have 3" piping that can be fabed for your setup

850.00 obo.. will deliver

http://i440.photobucket.com/albums/qq121/tomlaucks/spearcotrunkmountIC001.jpg
http://i440.photobucket.com/albums/qq121/tomlaucks/spearcotrunkmountIC003.jpg

[slow04]

Bo, for $850 you better send a couple hookers with it...

[s14.5gonewide]

considering i payed over 1,000 i think the price is very fair..
this is a big boy ic not a street car setup.

[WWhittle]

Nice tank and probably a good price but i can't imagine trying to stuff ice through that little cap.

[s14.5gonewide]

we usually use bags of ice.. bring 2 coolers.. fill with ice at the gas station.. let it melt a lill top it off with ice at the track make 2/3 passes depending on weather.. drain half... than top off with 2 bags of ice..

once u drop the ice and break it up cut a corner in the bag it falls right in... from my experience..

thx 4 the response tho.. i feel it is a very good price.. i have seen the core go for what i am asking for the whole unit.. i am sure your ic was a pretty penny.

[WWhittle]

we usually use bags of ice.. bring 2 coolers.. fill with ice at the gas station.. let it melt a lill top it off with ice at the track make 2/3 passes depending on weather.. drain half... than top off with 2 bags of ice..

once u drop the ice and break it up cut a corner in the bag it falls right in... from my experience..

thx 4 the response tho.. i feel it is a very good price.. i have seen the core go for what i am asking for the whole unit.. i am sure your ic was a pretty penny.


That makes sense- good luck with selling it. You might want to post it on Yellowbullet.com, not sure if you are familar with that site, but it gets tons of traffic.

[s14.5gonewide]

i have actually seen it.. their was a thread started semi recently about a shop called fast lane in murrells innlet sc.. he actually did quite a bit of work to my last project car.
http://www.yellowbullet.com/forum/showthread.php?t=128595&highlight=fastlane+motorsports

[WWhittle]

i have actually seen it.. their was a thread started semi recently about a shop called fast lane in murrells innlet sc.. he actually did quite a bit of work to my last project car.
http://www.yellowbullet.com/forum/showthread.php?t=128595&highlight=fastlane+motorsports



I believe i made a post in that thread. Lane jerked off a buddy of mine for a couple of weeks before we went and picked up the car.

[s14.5gonewide]

dosn't suprise me.