PDA

View Full Version : Best Dyno Prices?


Ballaholic29414
09-28-2009, 10:36 AM
Who has the best dyno prices in the Charleston area? Im just looking to do 1 pull to find my hp cut off point.

Illusions
09-28-2009, 10:39 AM
you looking for mustang dyno or dynojet?

showzone has a Mustang Dyno and AllUSA has the Dynojet.

Ballaholic29414
09-28-2009, 11:29 AM
Whats the difference?

LXtasy
09-28-2009, 11:59 AM
mustang dyno is the heartbreaker. puts a big load on the vehicle

WWhittle
09-28-2009, 12:44 PM
For what you are trying to find out, it doesn't matter what dyno you get on. I assume you are trying to figure out where to shift your car?

s14.5gonewide
09-28-2009, 12:47 PM
load bearing dyno read lower but give a more true readout..imo
it is also a better tool for tuning a street car sinceu can load cells and get the air/fuel better on part throttle.

allot of shops will give u a break if u do not want a wideband used. sk8 is a great guy at showzone. i have been to his dyno days and it is usually a fast process getting on/off dyno.

fwiw.. a dyno is just a tool to give u an idea where u are at.. the real heartbreaker is your et/traps:)

Ballaholic29414
09-28-2009, 12:57 PM
For what you are trying to find out, it doesn't matter what dyno you get on. I assume you are trying to figure out where to shift your car?


Yep. I went to CPR performance in West columbia the last time and she stopped making power at 6400, but I also had very loose coil wires(+ & -) at the time so she popped outa the exhaust at high rpm due to a weak spark(spark plugs were always black also). The guy I bought the motor from said he shifted at 7000 so somethings not right, unless he didnt play around with his shit points.

BAD BOB
09-28-2009, 01:32 PM
either will work for you being your not really worried about the actual number just where the power falls off. just call either and check prices

WWhittle
09-28-2009, 06:28 PM
Yep. I went to CPR performance in West columbia the last time and she stopped making power at 6400, but I also had very loose coil wires(+ & -) at the time so she popped outa the exhaust at high rpm due to a weak spark(spark plugs were always black also). The guy I bought the motor from said he shifted at 7000 so somethings not right, unless he didnt play around with his shit points.



Yeah, you can get on any dyno then. Should be fairly priced too for the little bit of info you are going to need.

minytrker
09-28-2009, 08:25 PM
Call ALLUSA Im sure they will take care of you.

08 Racecraft
09-28-2009, 08:42 PM
Call ALLUSA Im sure they will take care of you.
he should have been there saturday