OCT 8 Test N Tune Jackson.

[LilRedEclipse]

I Plan on being there. I need to do some shake down runs with the new parts and see how she does.

Hope to see some of you there. Stop by and say whats up.

[slowgreen99]

Supossed to be 2 huge races there too! Ive already asked work for Thursday night off, so I hope we'll be there!

[LilRedEclipse]

Do you know who is racing?

[slowgreen99]

Do you know who is racing?

They havent unveiled one of the races yet, but the other one is Cold Killa vs Hitler Jr

[LilRedEclipse]

Cool deal. Hopefully I don't get the I hate Imports shaft.... I normally get that when I am up there.

[slowgreen99]

Cool deal. Hopefully I don't get the I hate Imports shaft.... I normally get that when I am up there.

Well make sure and tell the fat kid wearing a Budweiser hat and a wilson trucking jacket who you are....otherwise I may pull the rice card too! haha, ive been known to be a dick.

[bwelch]

Im off. I might ride that way if I get bored.

[s14.5gonewide]

isn't jackson a 1/8 mile track?

you know their is one in north myrtle beach .. a bunch of import guy go to every sunday. locals..

it may be closer.. no u wont see the same wuality cars but non the less it is a freshly revamped 1/8 mile..
and why 1/8 mile turbo import?

[bwelch]

isn't jackson a 1/8 mile track?

you know their is one in north myrtle beach .. a bunch of import guy go to every sunday. locals..

it may be closer.. no u wont see the same wuality cars but non the less it is a freshly revamped 1/8 mile..
and why 1/8 mile turbo import?

Probably because its all wheel drive and it should cut a nasty 60' for an import unlike the front wheel drive ones that suck in an 1/8th

[Robert Holton]

isn't jackson a 1/8 mile track?

you know their is one in north myrtle beach .. a bunch of import guy go to every sunday. locals..

it may be closer.. no u wont see the same wuality cars but non the less it is a freshly revamped 1/8 mile..
and why 1/8 mile turbo import?

jackson is quarter mile

[s14.5gonewide]

ahh... makes sense now.. everyonei know that runs their tuns 1/8.. so i just assumed it was only 1/8 mile..
the house of hook.

[Robert Holton]

ahh... makes sense now.. everyonei know that runs their tuns 1/8.. so i just assumed it was only 1/8 mile..
the house of hook.

u can shut it down at the eigth u dont have to run it all the way through the quarter

[LilRedEclipse]

Lanes 1-2 are 1/4th and 3-4 are 1/8th, from what I have been told. I haven't had a good 1/8th yet because I have been spinning, but I have managed a 7.4@105 spinning :D .

See you guys tomorrow!

[slowgreen99]

Im off. I might ride that way if I get bored.

Give me a call today....you can follow us up there tomorrow. I gotta get some info on the goat making it to the track sunday lol!

[1998ta__1991rs]

Probably because its all wheel drive and it should cut a nasty 60' for an import unlike the front wheel drive ones that suck in an 1/8th

want to throw the goat on the trailer and make some passes?

[bwelch]

want to throw the goat on the trailer and make some passes?

We can do that. How bad is there tech? Do I need to get a helmet?

[1998ta__1991rs]

tech isnt bad on tnt night, you will need a helment, ive got one you can use, just let me know you can meet me in svill if you want and we can load it up from there

[bwelch]

tech isnt bad on tnt night, you will need a helment, ive got one you can use, just let me know you can meet me in svill if you want and we can load it up from there

Yeah I need to borrow that helmet. Summerville works for me. pm me your phone number.

[bambooi]

Good luck guys.

[bwelch]

Good luck guys.

Thanks. My axles and axle stubs are gonna need it.

[1998ta__1991rs]

Thanks. My axles and axle stubs are gonna need it.

thats what the winch is for

[slowgreen99]

thats what the winch is for

lets see.....we have 1998ta, slowgreen99, bwelch, and slowgreen73....I think we can manage to get it on the trailer :cheers

[LilRedEclipse]

SO... Today sucked. First pass I broke the 4 bolts that hold the driveshaft to the rear end. Second pass I snapped the drivers side front axle. Went up for a third pass and they said grudge racing only.... wtf


I think that's the last time I am going to jackson I hate that place really.

Those of you that can up and said hey, sorry If I was kinda out of it we were trying to figure out how to get the car fixed.

[Ballaholic29414]

SO... Today sucked. First pass I broke the 4 bolts that hold the driveshaft to the rear end. Second pass I snapped the drivers side front axle. Went up for a third pass and they said grudge racing only.... wtf


I think that's the last time I am going to jackson I hate that place really.

Those of you that can up and said hey, sorry If I was kinda out of it we were trying to figure out how to get the car fixed.


When you have a cut off time for test n tuners the fans/spectators get to see some action. Dorchester should consider doing this instead of have the spectators watch the racers argue about racing then end up going to Jackson the following thursday night to actually race. People travel loooooong ways to go to Carolina Dragway because its a good track.

When they told you the lane was closed for test n tuners u should of went back to the pits or called someone u knew that was at the track and do a test pass next to them. Thats what everyone does.

[slowgreen99]

SO... Today sucked. First pass I broke the 4 bolts that hold the driveshaft to the rear end. Second pass I snapped the drivers side front axle. Went up for a third pass and they said grudge racing only.... wtf


I think that's the last time I am going to jackson I hate that place really.

Those of you that can up and said hey, sorry If I was kinda out of it we were trying to figure out how to get the car fixed.

That car sounded like it was gonna be a beast! That was me that talked to you, and a couple others with me are on here too. Did yall run anymore after that?

[slowgreen99]

Glide....300 shot....white girl....gg :hysterical:

[bwelch]

glide....300 shot....white girl....gg :hysterical:

ggd.....ftw

[LilRedEclipse]

No we only got to get those 2 passes down. Right now I am at a friends place in Black mountain,NC. I guess there is a track near here so we are hitting that up tonight.

[bwelch]

you get that thing running right we got a 240sx you can go take some money from at bowman. They said they would race any 4 cyclinder turbo car.

[s14.5gonewide]

man if u are doing shake down run u best to be hitting darlington.

especially if u are preping for the dsm shootout.

[s14.5gonewide]

you get that thing running right we got a 240sx you can go take some money from at bowman. They said they would race any 4 cyclinder turbo car.


i can speak from experiance.. their is not street/drag 240sx that is making low 9 sec passes 1/4 mile.

mazworx had the fastest drag sr20det/240sx. it ran a 9.1 or something like that.. made 1000whp..

mazworx first 9 sec pass.
http://www.youtube.com/watch?v=mnfxneuXifk
http://www.youtube.com/watch?v=sJkojsrlscc

mark vs titan
http://www.youtube.com/watch?v=8wPjQPJSwpI&feature=related
the car is now retired.



ivan is a ka-t
http://www.youtube.com/watch?v=J-tQIAlCC9A&feature=fvw

both cars are purpose built drag cars..


take me with you and i will pick that 240 appart...

[bwelch]

i can speak from experiance.. their is not street/drag 240sx that is making low 9 sec passes 1/4 mile.

mazworx had the fastest drag sr20det/240sx. it ran a 9.1 or something like that.. made 1000whp..

mazworx first 9 sec pass.
http://www.youtube.com/watch?v=mnfxneuXifk
http://www.youtube.com/watch?v=sJkojsrlscc

mark vs titan
http://www.youtube.com/watch?v=8wPjQPJSwpI&feature=related
the car is now retired.



ivan is a ka-t
http://www.youtube.com/watch?v=J-tQIAlCC9A&feature=fvw

both cars are purpose built drag cars..


take me with you and i will pick that 240 appart...

What kinda of car you got. These guy with the car is stupid. they came up trying to race zac's duramax and wouldn't give use shit. He said we were scared with an 8k pound truck vs a 3k lb car. he is running 7.90's if he can get it going out the hole.

[s14.5gonewide]

^^^
http://www.carolinahorsepower.com/forum/showthread.php?p=50802#post50802
my old 240sx is in their...
i know a ton about 240sx and i know allot pf people that pro drag race them and build them. mazworx,ivan,duey,jacobs,prl,underground motorsports,riggs,

[bwelch]

^^^
http://www.carolinahorsepower.com/forum/showthread.php?p=50802#post50802
my old 240sx is in their...
i know a ton about 240sx and i know allot pf people that pro drag race them and build them. mazworx,ivan,duey,jacobs,prl,underground motorsports,riggs,

7.90 is1/8 mile. They said they would race anything that sits like them meaning 4 banger turbo. I dont know what kinda of money they have on it. They are from the bowman area. The will run a 1/4 mile on the street also.

[s14.5gonewide]

7.90 is1/8 mile. They said they would race anything that sits like them meaning 4 banger turbo. I dont know what kinda of money they have on it. They are from the bowman area. The will run a 1/4 mile on the street also.


that car is slow than..

i know plenty of 4cyl turbo around hear that would hustle him out of every dollar in his wallet.

i wouldnt even give the car time time of day.. proably laugh and walk away.

[bwelch]

that car is slow than..

i know plenty of 4cyl turbo around hear that would hustle him out of every dollar in his wallet.

i wouldnt even give the car time time of day.. proably laugh and walk away.

Next time we go to bowman and he is there I will see if they are talking real money. If so I would love to watch you bust that faggets ass in a race. He pissed me off bad when he said he wanted to see if we were scared. Because we wouldn't race him with a fuggin duramax head up. We need a car that looks slow or they will bitch out probably.

[s14.5gonewide]

our car looks slow untill u pop the hood/trunk.
oem body in radials...

if u show up with the lil redeclipse odds are he will bitch out.. unless he is completely stupid.
any 1st gen gsx with ccw and hoosiers means business... the rims alone mean money.
your best bet would be to grab a set of oem teardrops and put some hoosier radials on them if u want to be unsuspecting.

[s14.5gonewide]

even that awd spinning out the hole it should run better than a 7.9..