Questions about cam

[Mattyboy80]

http://cgi.ebay.com/ebaymotors/ws/eB...8025&viewitem=

Guy says it will give 45hpno tune and 75 tuned? Serioulsy questioning this.
What do you guys think?

[Matts94Z28]

Listing has been removed. It is not wise to install a cam untuned. What kind of power are you looking for? If drivability a concern?

[Matts94Z28]

If you are looking for a good all around cam that will drive great, especiualy if you are a 6-speed, then look into the StreetSweeper HT. I installed that cam in a full bolt on Z28 and it made over 410hp to the tires through a ten bolt and a t-56.

http://www.flowtechinduction.com/packages.htm

[Mattyboy80]

Wow thats crazy I was just there. I know about driving untuned. Lookin for about 425-450 rwhp. So far I just have lts borla exhaust slp blackwing lid and ported polished tb

[Mattyboy80]

Here this should work

http://cgi.ebay.com/ebaymotors/ws/eB...8025&viewitem=

[Mattyboy80]

Last time try this

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250617368025&ssPageName=ADME:X:RTQ:MOTORS:1123

[Matts94Z28]

That's probably not going to happen, to be honest. You can easily approach the 400hp mark cam only and still retain decent drivability. Ed Curtis is very knowledgeable and will work with you when it comes to what you want. I would go over to Hardcorels1.com and send him a PM. He worked with me for almost two weeks before we made a decision. He will also be drawing out a cam profile for my LQ9 later this year.

[Matts94Z28]

Last time try this

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250617368025&ssPageName=ADME:X:RTQ:MOTORS:1123

If it were me, I wouldn't waste my time with that. It's a bunch of work for a minimal gain. What are your goals for the car? Is it a daily driver? Automatic?

[Mattyboy80]

Not really worried about driveablilty. Ill check him out. Did you get the new link?

[Mattyboy80]

Auto. DD for now. gettin ready to buy a bike and another car. Really not worried about the mileage effect. Just want a nice lope and goal hp is abt 450

[Matts94Z28]

Yes, I would not mess with it. Send Ed Curtis a PM and let him know what you want to do, I am sure he can lead you in the right direction. You could also check out EPS for a cam.

[Mattyboy80]

Cool thanks. will check it out.