PDA

View Full Version : White00gt

OUTLAW
05-22-2010, 07:30 AM
YOU STILL GOING ? IF SO I NEED THE BACK TIRES AND THE LEAVE:hysterical:
White00gt
05-22-2010, 12:44 PM
Back Tires and the leave??? I just woke up.......Yeah I'm coming, I've got to get to atown, I'm dragging today.
OUTLAW
05-22-2010, 12:49 PM
You need to get to work days almost gone
White00gt
05-22-2010, 12:58 PM
I ran to the shop for lunch yesterday and grabbed my 10.5's and 275's. While I as there I dropped plumb-bobs off of everything. The rearend is square by all the plumb-bobs. So I swapped tires on rims and checked rims for run out. Bogarts are straight as an arrow so I put the 275's on them. I checked the welds, and wow they were wobbleing like a wet noodle. I didn't pay attention to which rim was on which side but the lateral and radial run outs on one of my welds was wayyyy out. So at the moment, I'm going with that rim??

I don't like that assumption tho, due to thinking that a rim out that bad would of rattled me durring the burn out?? So.....Thinking something is going on with the frontend so I'm going to check all of that today. What time do gates open Sunday? 3?
OUTLAW
05-23-2010, 07:53 AM
yes it is at 3
OUTLAW
05-24-2010, 08:12 AM
:bigthumb:how is work? i got home at aboute 2
White00gt
05-24-2010, 08:29 AM
same here I was home at 2...and what you doing posting before I even get up on your day off..:poke:


I looked at the vid from my last pass when I got home..You have to look under the car at the right front. She picks it up and puts it down twice that I can see for sure, but felt like 3-4 times in the car.:razz:
OUTLAW
05-24-2010, 12:42 PM
:eek2::eek2:same here I was home at 2...and what you doing posting before I even get up on your day off..:poke:


I looked at the vid from my last pass when I got home..You have to look under the car at the right front. She picks it up and puts it down twice that I can see for sure, but felt like 3-4 times in the car.:razz:

you have to put on a vid so i can see
White00gt
05-24-2010, 12:59 PM
I'm looking over your stuff right now.....I'm checking different vids trying to see where the 60ft clocks are, but I swear it's looking like you were still at about a 30*+ angle when you went threw the 60ft, on your last two runs.
White00gt
05-24-2010, 01:01 PM
I've got my laptop here.. I got to do 4 corner brakes on a jeep, when I'm done I'll see if I can get something done here. If not when I get home for sure.
OUTLAW
05-24-2010, 01:40 PM
I've got my laptop here.. I got to do 4 corner brakes on a jeep, when I'm done I'll see if I can get something done here. If not when I get home for sure.

its aboute time they get some work out of you:bs:
White00gt
05-24-2010, 01:43 PM
Bahhh General public...:boohoo: Racercar please :finger::ty:
OUTLAW
05-24-2010, 04:33 PM
hey man you need to try bowman it is a good track
White00gt
05-24-2010, 04:35 PM
Lets rock and roll, I didn't realize that people were saying it's really close to Dorchester, I didn't know that. I don't even now where I'm at when I'm at Dorchester.
soccerspike15
05-24-2010, 04:49 PM
Lets rock and roll, I didn't realize that people were saying it's really close to Dorchester, I didn't know that. I don't even now where I'm at when I'm at Dorchester.

how do you like those goodyear radials?
White00gt
05-24-2010, 04:51 PM
loves them, a big selling point on them for me was the sidewall.. With 17psi my radial sidewalls are as spongy as my 10.5's with 12psi.
OUTLAW
05-24-2010, 04:53 PM
lets do it how about those 295 radials
White00gt
05-24-2010, 05:02 PM
295 is a 30" tire..I think. 315 is also I think. but then again could be like the 275/60 vs. 275/50 26" and 28" respectivly
1iron
05-24-2010, 05:10 PM
The MT 295/55/15 is a 28in tire
White00gt
05-24-2010, 05:15 PM
huh? 28x10 then? 9.6 or something like that?
1iron
05-24-2010, 05:23 PM
http://www.mickeythompsontires.com/strip.php?item=ETStreetRadial
WWhittle
05-24-2010, 05:31 PM
yes, 295/55/15 is the equivalent to the 28x10.5
OUTLAW
05-24-2010, 05:43 PM
The MT 295/55/15 is a 28in tire

is it like a 28 10.5 ?:eek2:
OUTLAW
05-24-2010, 05:45 PM
yes, 295/55/15 is the equivalent to the 28x10.5

big wes whats up man ? long time no see
WWhittle
05-24-2010, 06:12 PM
big wes whats up man ? long time no see

I know it- i hear you are running good!
OUTLAW
05-24-2010, 06:55 PM
I know it- i hear you are running good!

i had a 1.23 60ft on the 275 last night on motor. only my 2 time out on them tires
White00gt
05-24-2010, 07:02 PM
'ol bubba Shaw was moving out lastnight... I'm getting the vids up give me asec I'm going to cut them down for youtube. I'll bring you the full shabang tomorrow.


I'm happy your car is working so well on them for just bolting them on. Me..it didn't work quite that way :(
OUTLAW
05-24-2010, 07:23 PM
'ol bubba Shaw was moving out lastnight... I'm getting the vids up give me asec I'm going to cut them down for youtube. I'll bring you the full shabang tomorrow.


I'm happy your car is working so well on them for just bolting them on. Me..it didn't work quite that way :(

you will get i no you want quit:ty: