resurfacing flywheel

[Luckie]

I need to get a flywheel resurfaced and was looking for some recommendations on where to take. I know of two places that I have used before but don't care for their quality.

[ElecTech]

Joint and Clutch, Cross County Rd.

[MonteC]

We do them for 45 dollars.

4543 rivers ave

PT's transmission parts.

[Luckie]

Rob, I was talking to Gerald earlier and he had mentioned that if I buy the new clutch from PT's that he would turn the flywheel for free? I was just curious, cause if thats the case I might do so. Its just a 97' dakota...

[MonteC]

Rob, I was talking to Gerald earlier and he had mentioned that if I buy the new clutch from PT's that he would turn the flywheel for free? I was just curious, cause if thats the case I might do so. Its just a 97' dakota...

Pretty sure he will. Gotta know all the details though, may need to order the clutch kit. Havent been restocking many standard clutch sets, not a big seller.

[Luckie]

I'll call up there in the morning and find out, thanks for the info.

[1998ta__1991rs]

any oreilly can do them, i think its around 25, just find someone thats compatenet to do it

[Luckie]

Thats normally the problem these days with the parts stores, nobody knows anything other then what the computer tells them. Once in a while but not often you find someone worth a damn.

[1998ta__1991rs]

Thats normally the problem these days with the parts stores, nobody knows anything other then what the computer tells them. Once in a while but not often you find someone worth a damn.

go to the summerville store and talk to jimmy, or go to goosecreak and talk to billy, he's a member here and he runs that store, his screen name is dustedmopar

[dustedmopar]

:cheers I turned the flywheel on my dad's 97 Dakota when I changed his clutch a couple years ago. I'm off until Tuesday though, we charge 35 at the O'reilly in Goose Creek.