Anybody locally install clear protective bras?

[chrisheltra]

:confused:

[BigdaddyDupree]

there is a guy at kevins work who does. he can give you his number im sure

[bwelch]

$$$$$

[Matts94Z28]

You will hate yourself when you need to remove it down the road. I removed one from a benz about 2 years ago and it took me almost 7 hours with a steam cleaner and some acetone.

[chrisheltra]

You will hate yourself when you need to remove it down the road. I removed one from a benz about 2 years ago and it took me almost 7 hours with a steam cleaner and some acetone.

Gotta be better than rock chips from I26?

[Matts94Z28]

I see your point... SC road suck. I just know how much of a PITA it is to remove.

[snakeplissken]

http://www.carolinahorsepower.com/forum/showthread.php?t=4761&highlight=clear

In hindsight, I should have used Kevin's guy. The Audi was a tough gig.

[chrisheltra]

http://www.carolinahorsepower.com/forum/showthread.php?t=4761&highlight=clear

In hindsight, I should have used Kevin's guy. The Audi was a tough gig.

Lookie there I even posted in that thread.

[SLOWGREEN73]

You get what you pay for . call marty 345-6356.

[FRDnemesis]

Gotta be better than rock chips from I26?



Dont put anything but the 3M brand on the car Chris. I have it on my car and I can tell you right here and now, it has saved the paint on my car more than a 100 times. It was pretty expensive but like you said, it is better than the alternative.

There is a guy in West Ashley that installs something similar to the 3M product but its not the same (name slips me) but it is not as good as the 3M (not as thick, discolors, has half the warranty and is KNOWN to be a much larger problem when removing).

The only 3M installer around these parts is in Hilton Head. I know because I have to get mine replaced due to the knicks that are in it from I-26. I just need to get off my lazy ass and file my claim so I can get it redone. You can go to 3M's site and look for "3M Clear Bra" and you will see and read about it.

My car has
Nose, headlights, foglights, rocker panels, mirrors, 36" up the hood, rear hatch and bumper cover where it meets the hatch. If you would like to see it, you are more than welcome to, just let me know.

jeff

[chrisheltra]

Dont put anything but the 3M brand on the car Chris. I have it on my car and I can tell you right here and now, it has saved the paint on my car more than a 100 times. It was pretty expensive but like you said, it is better than the alternative.

There is a guy in West Ashley that installs something similar to the 3M product but its not the same (name slips me) but it is not as good as the 3M (not as thick, discolors, has half the warranty and is KNOWN to be a much larger problem when removing).

The only 3M installer around these parts is in Hilton Head. I know because I have to get mine replaced due to the knicks that are in it from I-26. I just need to get off my lazy ass and file my claim so I can get it redone. You can go to 3M's site and look for "3M Clear Bra" and you will see and read about it.

My car has
Nose, headlights, foglights, rocker panels, mirrors, 36" up the hood, rear hatch and bumper cover where it meets the hatch. If you would like to see it, you are more than welcome to, just let me know.

jeff

I may hit you up to look at it but probably wont be until next week unless your planning on going to bowman on sunday.

[Carlrx7]

save your money and just repaint the bumper every two or three years!

[snakeplissken]

Gotta be better than rock chips from I26?

They are now scraping it between Ashley Phosphate and 17-A.

It's even more brutal.

[Carlrx7]

They are now scraping it between Ashley Phosphate and 17-A.

It's even more brutal.

guess im taking ladson-dorchester from now on

[FRDnemesis]

I may hit you up to look at it but probably wont be until next week unless your planning on going to bowman on sunday.


Not sure if I'm going to Bowman or not. I work off of Crowfield Blvd, so if you're in the area I could meet you somewhere, just let me know.

[chrisheltra]

Not sure if I'm going to Bowman or not. I work off of Crowfield Blvd, so if you're in the area I could meet you somewhere, just let me know.

Thats cool I live off of Crowfield Blvd in the Hamlets so your not to far from me when Im home.

[MonteC]

. I have it on my car and I can tell you right here and now, it has saved the paint on my car more than a 100 times.

jeff

There ya go Tara. Here is your answer.

[FRDnemesis]

Thats cool I live off of Crowfield Blvd in the Hamlets so your not to far from me when Im home.


If you come out of the Hamlets to the stop light and go straight across, take your first right next to Quoizel and follow it to the culdesac, thats where I work (AAI Textron Systems). What time are you usually heading home?

[bwelch]

Do you work at that warehouse with all the security guards and cameras? Thats military contrator

[FRDnemesis]

Do you work at that warehouse with all the security guards and cameras? Thats military contrator

Its not quite a "warehouse", its a two story building with lots of one way mirrored glass. But, yes, there is a camera on every light pole and every corner of the roof. Might even be a couple in the pine trees............. just sayin' :twisted:

[LadyInRed]

There ya go Tara. Here is your answer.

Yep, I knew I wasn't losing my mind.

[ElecTech]

The only 3M installer around these parts is in Hilton Head. I know because I have to get mine replaced due to the knicks that are in it from I-26. I just need to get off my lazy ass and file my claim so I can get it redone. You can go to 3M's site and look for "3M Clear Bra" and you will see and read about it.

jeff

We used this guy for a Jamison's customer some years ago. Did an outstanding job. You can also call Kerry Jamison and ask him about it if you need another opinion.

[chrisheltra]

If you come out of the Hamlets to the stop light and go straight across, take your first right next to Quoizel and follow it to the culdesac, thats where I work (AAI Textron Systems). What time are you usually heading home?

Im usually turning in the hood at around 3:45

[LXtasy]

They are now scraping it between Ashley Phosphate and 17-A.

It's even more brutal.

It wasn't bad when there vacuum / sweeper was working. But a couple of mornings my truck has taken a major hit in the rock storm. Even got a nice chip in the glass because of it. :mad:

[chrisheltra]

I avoid 26 like the plague.

[MonteC]

I avoid 26 like the plague.

x2.

Except when i drive my acura. LOL. If you look at the windshield and the front of that car its actually sand blasted from our daily trips down the I.

[chrisheltra]

x2.

Except when i drive my acura. LOL. If you look at the windshield and the front of that car its actually sand blasted from our daily trips down the I.

So is my truck but by the time I realized what was going on it was too late.