PDA

View Full Version : Video camera mounts

Matts94Z28
08-08-2010, 11:31 PM
What brand would you recommend? I see there are a ton of knock offs that don't actually work.
brewerz28
08-08-2010, 11:38 PM
i would recommend you stop being a complete pussy and spray your bitch..fuck sparkplugs and a tune you godamn joe. lol
Matts94Z28
08-08-2010, 11:52 PM
i would recommend you stop being a complete pussy and spray your bitch..fuck sparkplugs and a tune you godamn joe. lol

:poke: I have the plugs and the tune, biatch. I just need to get my Nitrous Outlet switch panel installed. Then I will be gapping Vettes for days.


http://t0.gstatic.com/images?q=tbn:ANd9GcQsxpQi4NOWvzLKQDA2gagOEawjGz9sC HDzCy73z9gj9mAWt90&t=1&usg=__bhpxY69Q01JWvNf77Z7VFDR0Iig=
1998ta__1991rs
08-09-2010, 02:12 AM
Duct makes a nice one

http://www.duckbrand.com/
clubracergt1
08-09-2010, 06:22 AM
Where do you plan on mounting the camera? If inside, and you have adjustable headrests, a mount can be made for around 25-30 bucks.
brewerz28
08-09-2010, 08:54 AM
:poke: I have the plugs and the tune, biatch. I just need to get my Nitrous Outlet switch panel installed. Then I will be gapping Vettes for days.


http://t0.gstatic.com/images?q=tbn:ANd9GcQsxpQi4NOWvzLKQDA2gagOEawjGz9sC HDzCy73z9gj9mAWt90&t=1&usg=__bhpxY69Q01JWvNf77Z7VFDR0Iig=

lol
chrisheltra
08-09-2010, 08:57 AM
These work great.

http://www.powrgrip.com/cgi-bin/powrgrip/TL6PH3025.html?page_class=sporting

But if your taking about in the bedroom then a standard tripod will work. lol
Sean
08-09-2010, 09:20 AM
Where do you plan on mounting the camera? If inside, and you have adjustable headrests, a mount can be made for around 25-30 bucks.

This. Square aluminum tubing, long bolts and wing nuts. You can buy a camera mount bracket at any camera store.
Matts94Z28
08-09-2010, 12:59 PM
looking to mount it on the windshield. Not the head board, lmao.
DolSVT00
08-09-2010, 01:21 PM
These work great.

http://www.powrgrip.com/cgi-bin/powrgrip/TL6PH3025.html?page_class=sporting

But if your taking about in the bedroom then a standard tripod will work. lol


This is what I have.
ElecTech
08-09-2010, 02:33 PM
But if your taking about in the bedroom then a standard tripod will work. lol

I prefer the helmet cam.
Matts94Z28
08-09-2010, 02:36 PM
I prefer the helmet cam.

:hysterical:
chrisheltra
08-09-2010, 02:41 PM
I prefer the helmet cam.

Which helmet?
ElecTech
08-09-2010, 03:51 PM
Which helmet?

depends what effect I'm after.:thatshot:
Matts94Z28
08-09-2010, 06:19 PM
nanny cam ftw.
slowgreen99
08-09-2010, 07:20 PM
i think with how fast your car is you could just set it on the dash with no worries of sliding off
chrisheltra
08-09-2010, 07:23 PM
i think with how fast your car is you could just set it on the dash with no worries of sliding off

Its not about speed its about weight transfer. :)
BigdaddyDupree
08-09-2010, 07:23 PM
lol
slowgreen99
08-09-2010, 07:27 PM
maybe! then just tape it down with some scotch tape
1998ta__1991rs
08-09-2010, 08:00 PM
maybe! then just tape it down with some scotch tape

velcro should do the trick
chrisheltra
08-09-2010, 08:28 PM
Nah deck screws should do the trick....
slowgreen99
08-09-2010, 08:47 PM
Paw.......
Matts94Z28
08-09-2010, 09:27 PM
It might fly off the dash of the cobalt though... we don't need that.
bwelch
08-10-2010, 02:45 AM
its an auto just hold it with your right hand