:o

[chrisheltra]

http://i548.photobucket.com/albums/ii342/chrisheltra/59dc3719.jpg

[Pesce Nero]

you needed a grinder to install a wheel?

[ElecTech]

I'm guessing that's the brake caliper on the floor.

[chrisheltra]

you needed a grinder to install a wheel?

Yup gotta grind a little bit of material off the back of the caliper to get 15" wheels to fit over Lightning brakes. I got a set of modified brake bracket which moved my calipers in a 1/4". Some just grind off that extra 1/4" of material off of the calipers.

[chrisheltra]

I'm guessing that's the brake caliper on the floor.

???

[ElecTech]

???

I was referring to the black, dusty material on the floor. I guess its too early to have to think that much.:poke:

[chrisheltra]

I was referring to the black, dusty material on the floor. I guess its too early to have to think that much.:poke:

Ah gotcha....

[Harry]

I had to do alot of grinding on my calipers to make 15" rims fit on my car also. It sucked. I hated to take off material on the calipers.

[Mike]

I was referring to the black, dusty material on the floor. I guess its too early to have to think that much.:poke:

:mrgreen: clever.

Flew over my head to, but that isn't hard to do.

[Shane361]

The cardboard is pointing the wrong way! :twisted:

[Matts94Z28]

I understood it, but then again, I took half of my caliper off with a grinder. ha

Wheels look good Chris. You are building one heck of a show truck! :laugh2:

[1iron]

I had to do alot of grinding on my calipers to make 15" rims fit on my car also. It sucked. I hated to take off material on the calipers.

On the Mustang?

[chrisheltra]

I understood it, but then again, I took half of my caliper off with a grinder. ha

Wheels look good Chris. You are building one heck of a sLow truck! :laugh2:

Fixed

[chrisheltra]

The cardboard is point the wrong way! :twisted:

I got lost. lol

[Harry]

On the Mustang?

yes

[Derek]

I understood it, but then again, I took half of my caliper off with a grinder. ha

Wheels look good Chris. You are building one heck of a show truck! :laugh2:

Hey do you still have your stock brakes?

[WWhittle]

yes

Cobra brake calipers, right?

[Derek]

Hey do you still have your stock brakes?

Or anyone else have some stock rear camaro calipers. Got a little rx7 project that could use some.

[Harry]

Cobra brake calipers, right?

I think someone swapped in a SN95 rear to do the 5 lug conversion. The whole rearend is wider than normal. The front has 2001 GT brakes also.