Need a mini-starter drilled & tapped to rotate it

[04ctd]

buddy has 350 in a S-10,

GM starter was heat soaking, bought a mini starter with multi mount holes to clock it around, but needs one more set of holes drilled & tapped.


preferably flush tapped.

who could do it right the first time?

I will just print this page out for him if you have a name & number.

[LXtasy]

get a 97 5.7 silverado starter. ministarter from the factory. will bolt up with no modifications. thats if no one can modify what u have

[BigdaddyDupree]

I gots one of dem

[04ctd]

TD, wat u want fer one?

shoot me a PM with a price & when we can meet up.

[minytrker]

I have built over 10 s10's with 350 in them, just make a small heat shield and it will solve all the problems. The last s10 I did had headers, over 400 hp and a stock starter with a homemade heatshield with no problems. I used stock starters and every one and headers almost every one and the heatshield solved all the heat soak problems.

[LXtasy]

I have built over 10 s10's with 350 in them, just make a small heat shield and it will solve all the problems. The last s10 I did had headers, over 400 hp and a stock starter with a homemade heatshield with no problems. I used stock starters and every one and headers almost every one and the heatshield solved all the heat soak problems.

I agree. I wrap the one on tylers truck when I had it. The one in the blazer is left alone. But than again stock lt1 starter also

[04ctd]

his starter is shot. it musta been the OEM starter on the motor.

he's already bought & paid for the mini starter.

[BigdaddyDupree]

ive still got the mini starter wrapped and all sitting in the garage. id let go of it