PDA

View Full Version : carolina today


BAD BOB
04-03-2011, 09:27 PM
took the ole RCF to carolina today and ran in the bracket race, which i sucked at like usual, but once most the racing was done i got to take it down the 1/4. did pretty good other than the first one i shifted to neutral which didnt work out well and hit 9k. but on the second pass everything worked well but i didnt get to hold it trough bc of the 373 in the rear. i managed to get a 10.03 out of it and man does that feel different on the big end when you got to stop. hope to take it there again and try for a little faster

Jonathan
04-03-2011, 10:09 PM
Congrats man. :)

ShawnBoyMoody
04-03-2011, 11:45 PM
took the ole RCF to carolina today and ran in the bracket race, which i sucked at like usual, but once most the racing was done i got to take it down the 1/4. did pretty good other than the first one i shifted to neutral which didnt work out well and hit 9k. but on the second pass everything worked well but i didnt get to hold it trough bc of the 373 in the rear. i managed to get a 10.03 out of it and man does that feel different on the big end when you got to stop. hope to take it there again and try for a little faster

So close to the 9's you can taste it.:bigthumb:

RobertHolton1
04-04-2011, 12:37 AM
itll go 9s when you hold it through... good pass man!

Matts94Z28
04-04-2011, 12:47 AM
Nice. I passed you on 78 and thought you broke something on Dorchester originally.

It should really ride out with your 88mm. lol

BAD BOB
04-04-2011, 07:15 AM
yeah the bigger turbo should help and if i go down on the gear it should help make it through but may slow it down in the 1/8th. dont know how much more i can get out of it with 93 pump gas. i guess i will see

1998ta__1991rs
04-04-2011, 07:42 AM
that stock motor isnt going to like the 88 though the 1/4, byebye pistons

BAD BOB
04-04-2011, 08:36 AM
just tryin to get the most out of it for now

ElecTech
04-04-2011, 08:45 AM
Need a 3.42 - 3.55 gear in it on the 1/4 mile. You can get away with a much taller gear on a FI car. The big torque should pull through if the converter is right.

I have a 3.73 in the 8.8 that is going in the Jimmy, but I may switch it to a 3.55 if I stay with a 26" tire.

minytrker
04-04-2011, 08:49 AM
That's almost the exact time I ran with 4.30's when I was came only with a lot of nitrous. I had to let out at the 1,000ft marker because my tach was pegged out, went a 10.003.

BAD BOB
04-04-2011, 09:49 AM
yeah i got some 3.55s that i might try but worried it may try and push throught the converter. i guess it wont hurt to try anyways just as long as it dont hurt the 1/8thmile too bad. might make it into the 9s someday

1iron
04-04-2011, 10:12 AM
700 ci should run in the 9's don't ya think>

BAD BOB
04-04-2011, 10:37 AM
I think that 700ci theory may be flawed.

98nbmz
04-04-2011, 11:37 AM
I wonder what the fastest shortblock time is..

1998ta__1991rs
04-04-2011, 01:25 PM
I wonder what the fastest shortblock time is..

a stock 5.3 has gone 7's, dont start that ls1tech crap

98nbmz
04-04-2011, 01:43 PM
a stock 5.3 has gone 7's, dont start that ls1tech crap

I guess its the fastest flat black, notch back, ls powered, stock shortblock, mustang in the world! And yours is just a peice of dried up dog poop!

BAD BOB
04-04-2011, 02:32 PM
a stock 5.3 has gone 7's, dont start that ls1tech crap

i just cant grasp that. i guess someone can say it has happened but unless i see it i dont believe it. with what i have seen capable with mine i just dont see that much more left in a smaller motor.

98nbmz
04-04-2011, 02:58 PM
i just cant grasp that. i guess someone can say it has happened but unless i see it i dont believe it. with what i have seen capable with mine i just dont see that much more left in a smaller motor.

http://www.youtube.com/watch?v=jbRw9pO1DMY&feature=related

BAD BOB
04-04-2011, 03:52 PM
god damn that a race car! oh and that aint shit!

Jeff
04-04-2011, 04:05 PM
god damn that a go-kart ! oh and that aint shit!


Fixed it for ya Bob .

White00gt
04-04-2011, 04:34 PM
I wonder what the fastest shortblock time is..

Never even see a shortblock run..hand crank...hahahah sorry had too lol.


umm,... <--I've watched a stock 5.3L truck motor run 5.60's w/a B/W S480.

Darryl Buckner
04-04-2011, 05:11 PM
Randy Seward runs in NMRA true street goes 8.40's at 160 mph plus, and talk about crazy gears. He runs a 295/65 drag radial with 3.25 gears in a 9" rearend. Turbos must like the grunt. He has an AOD trans, so I can imagine cruising on the highway at 80mph at 1500rpm.

Carlrx7
04-04-2011, 08:08 PM
rx7 ftw!

Kenny Mcdonald
04-04-2011, 08:14 PM
700 ci should run in the 9's don't ya think>

I heard that you and Robert both had mountain motors!!!!:hail:

1iron
04-04-2011, 08:23 PM
I heard that you and Robert both had mountain motors!!!!:hail:

I had a 5.0. My car is in the shop getting a Big Block with a direct port nitrous system. I am also getting it converted to a tube chassis, ladder bar, powerglide, and full tubbed car (so I can put the flintstone tires on it). Then I am going to run against small block, stock suspension cars on radials.:poke:

BAD BOB
04-04-2011, 08:45 PM
stock motor stock suspension cars too

Richard Head
04-04-2011, 08:46 PM
I had a 5.0. My car is in the shop getting a Big Block with a direct port nitrous system. I am also getting it converted to a tube chassis, ladder bar, powerglide, and full tubbed car (so I can put the flintstone tires on it). Then I am going to run against small block, stock suspention cars on radials.:poke:

:hysterical::hysterical::yourock:

ShawnBoyMoody
04-04-2011, 08:55 PM
I had a 5.0. My car is in the shop getting a Big Block with a direct port nitrous system. I am also getting it converted to a tube chassis, ladder bar, powerglide, and full tubbed car (so I can put the flintstone tires on it). Then I am going to run against small block, stock suspention cars on radials.:poke:

http://www.freesmileys.org/smileys/smiley-score009.gif (http://www.freesmileys.org/smileys.php)