new parts

[BigdaddyDupree]

I have been contemplating going turbo on the truck and i finally took the plunge to get a motor for it that can make decent power. I bought a 370 from neal that was build by Weber racing. It has k1 rods and wiseco pistons -25cc dish. full arp hardware and a custom turbo cam. also got a set of afr 225's from him. This will be the first stout motor i have bought and im pretty stoked. a few of yall know so i figured id just let everyone know.

http://i255.photobucket.com/albums/hh146/BigDaddyDupree/2011-10-24_21-17-58_389.jpg
http://i255.photobucket.com/albums/hh146/BigDaddyDupree/2011-10-24_21-17-52_502.jpg
http://i255.photobucket.com/albums/hh146/BigDaddyDupree/2011-10-24_21-16-17_572.jpg
http://i255.photobucket.com/albums/hh146/BigDaddyDupree/2011-10-24_21-16-30_671.jpg
http://i255.photobucket.com/albums/hh146/BigDaddyDupree/2010-12-23_23-36-13_540.jpg

[BAD BOB]

ok

[Bradleyrj]

Will be faster than a stock 350.

[ForceFed4g63]

Nice! Add that to the list of cars Brandon won't race...

[Matts94Z28]

Kswiss!!

[BigdaddyDupree]

Im not a grudge racer and ill let everyone know as I make progress. Me and brandon are friends id let him outrun ne for fun.

[WWhittle]

Congrats! Good luck with it. What's you target date to have it in?

[s14.5gonewide]

nice motor and bw turbo.. keep us updated... sooner than later its going to be Carolina turbo power... everyone seems to be going forced induction.

[BigdaddyDupree]

Im planning to put it in january or so I still need a torque converter a dif gear, blow off valve nd wastegate along with odds n ends. It will be a blow through in the beginning but if there are issues ill go bs3 n let it eat. Any idea on how much power y'all think this will make? Et?

[Bradleyrj]

What size carb? More specifics on the turbo?

[BigdaddyDupree]

It will be a holley 750 blowthrough and the turbo is a bw s480 with a 1.32 ar

[WWhittle]

Since you have time, try to find a smaller a/r. Something closer to 1.0 is probably better for your setup. The 1.32 will probably be a little slow to spool. It will work, just not why I would consider ideal- IMHO. I'm sure you can find one for cheap.

[WWhittle]

And my horsepower guess is 700-750 if everything else is in check. 800-850 if you go efi.

[jmd]

sweet .

[Bradleyrj]

I am going to stay between 700-800 regardless of fuel system.

[red99pony]

tyler are you planning to drive this on the street any?

[RobertHolton1]

Im planning to put it in january or so I still need a torque converter a dif gear, blow off valve nd wastegate along with odds n ends. It will be a blow through in the beginning but if there are issues ill go bs3 n let it eat. Any idea on how much power y'all think this will make? Et?

4.83 @ 153

[chrisheltra]

Can I borrow the turbo?

[Whaler]

Nice set up Tyler. Good luck with getting everything right.

[ShawnBoyMoody]

Awe sookie keeping the Blow-through dream alive! Good luck Big Daddy.

[BigdaddyDupree]

The truck will be streetable. I plan to be driving it more honestly. We shall see

[WWhittle]

That should be a beast on the street.

[BigdaddyDupree]

I swapped put the front springs yesterday trying to get the front end out the dirt.