Ya I understand, some of those machine's mentioned are upwards of 5 Grand like the syncrowave.

In my honest opinion, one of those maxstar's with the hi freq and AC add on would fit in your budget if I could get some kind of discount. That would be new too not refurb or used.

I've read that the Maxstar units weren't that great. Everyone praises the syncrowave 200, but 1900 for a new one is out of my price range. I would think a used or refurbished one shouldn't be too far from the budget

If you don't mind, could you give me a call tomorrow when you find something out

757-971-0902 and my name is Rodney by the way

Thats because their a castrated xmt, with so so adjustability, most try and run them on 110 and their duty cycle is low on 110.

The syncrowave is the Mercedes of welding machines, if you turn the knobs right a 2 year old could lay down a pretty bead with it.

will do

The HF units from miller say that it's for welders with an engine. So what HF box and converter are you referring to

I haven't tried searching their site for it, Its reletively small and comes with a thumb style reistat. I'll look tomorow when I get to work, we use them for field repairs on aluminum applicai armor and repairs on stainless turret rings where the thin rings for the roller's of the gun mounts sit using maxstar machines.

We tend to have to run them off of 110 generators and mini bottles at forward operating bases in remote locations of IRAQ and Afganistan. Its a multiprocess welder in a suitcase basicly.

I guess my explanation is hard to imagine, but think of it like this: Our trucks we build have 110 power on them (we make them that way, you can plug an extension cord in them and grind/cut/drill with common hand tools.) The suitcase with the welder and bottles you can throw into a blackhawk and take to any location to make repairs those maxstars were our solution. Kinda hard to do that with a gas/diesel machine lol.

It says the xmt 304 has to use a spool gun since it's a DC only machine. So I'm assuming that would be the same with the Maxstar units

http://www.millerwelds.com/resources...light=hf251d-1

i got my syncrowave 200 for 2grand with everything for tig and arc minus a bottle

Do you want to sell it to me with a bottle for 1500 :hysterical:

What's the other welding supply place besides Praxair or a repair place that sells used/refurbished units?

there is national welder (or airgas) and tri-tech on rivers. dont know much about them always delt with praxair. i dont think tha anyone has any used or refurb ones. most, if they spent that kind of money on a tig they will keep it. mine is basically brand new so i couldnt get rid of it for cheap

Yes the spool gun is for Aluminum mig, you can do that with DC and helium.

Theres also an AC accesory that uses the transformer trust me. I know what your wanting to do, I wouldn't recomend you something if it was not capable of doing what you want. Hell I could bring one home and let you use it if I had argon here. I'll get a price too.


Edit: I can't find the setup on their site anywhere I don't even see the maxstar machine we buy listed. I'll get a picture of the entire setup and post it on here tomorrow. Its literally a suitcase, no BS you wouldn't believe it.

dynasty is the only miller with an inverter that allows u 2 adj hertz from 20-400 this will help u shape ur arc cone every real aulminum welder knows this also has the most adj square wave and miller only offers tig machines with cc not cv mr know it all also top of line dynasty only tig that miller says can handle inch thick

Uhhh Look at this http://www.millerwelds.com/products/...rowave_350_lx/

Compare the dynasty to it...... You cant beat the standard, and the syncrowave is the standard.

The dynasty is more portable, and and digital but not better.

Oh and BTW...... CC/CV is for multiprocess usage and exactly what I said and since your so smart...... Here's a small CC/CV machine that miller offer's that will tig just fine, read it, its listed.............. http://www.millerwelds.com/products/...xmt_304_cc_cv/

And uh while were at it..... You can mig or stick or tig with the dynasty or the syncrowave with the right add ons...............

xmt is a multiprocess without ac tig n syncrowave aint got cv bud

also top of line syncrowave rated 1/2 "

Honestly the syncrowave will work fine for the guys needs so thanks EVERYONE!

If you read what I said, you'll find I said get one with CC/CV and you can do multiprocess.

In tig aluminum? So what, who's gonna weld thicker than that with tig? Sure they offer the dynasty 700 that will weld 1" but who's gonna tig weld 1" material? Thats why you would use a multiprocess welder as I suggested.

Your telling me you can't take a syncrowave or a dynasty and hook a suitcase to it and Mig? I hope not, because then everyday I'm performing miricles.

After searching for a minuite and trying to figure out WTF you are talking about I came up with the only statement where I mentioned 1" and any 200+ amp multiprocess welder will weld as many inches thick as you want as long as you don't run out of filler its called a multipass weld. Where did he or I say he was welding 1" thick alumium in a single pass?

I found a miller syncrowave 180 for a pretty decent price. How does that compare?