Carolina Horsepower - ATTN slowgreen99

Page 5 of 5

« First

Show 40 post(s) from this thread on one page

Carolina Horsepower (http://www.balatrons.com/forum/index.php)

- Grudge Racing (http://www.balatrons.com/forum/forumdisplay.php?f=32)

- - ATTN slowgreen99 (http://www.balatrons.com/forum/showthread.php?t=4308)

BAD BOB

11-04-2009 10:50 PM

Quote:

Originally Posted by soccerspike15 (Post 54221)

its easy blow dryer takes it off really easy, thats the first thing i did to my car

while it was on jack stands?

WWhittle

11-04-2009 10:52 PM

Quote:

Originally Posted by AverageJoe (Post 54216)

Thanks, theres a couple in my "garage". I need to take some more, just removed my side moulding.

Damn that thing is badass.

AverageJoe

11-04-2009 10:54 PM

Easy, i took some soft cord that i had a spool of and put it behind the moulding and with a sawing motion took it all off in about 2 minutes. Then I rolled the small amount of adhesive left off with my thumb and cleaned the residue with goo gone. Whole project probably took all of 20min.

soccerspike15

11-04-2009 10:54 PM

Quote:

Originally Posted by BAD BOB (Post 54222)

while it was on jack stands?

when i first bought the car :bigthumb::hail:

AverageJoe

11-04-2009 10:57 PM

Quote:

Originally Posted by Wes Whittle (Post 54224)

Damn that thing is badass.

Thanks, now if I could get some traction (and possibly a driver mod) it might make some respectable times. I have a set of telstars, but it will be a while before I can afford some et streets for them.

MonteC

11-05-2009 12:12 AM

After all that trouble we went through to put those brakes on you better start scraping up some loot.

slowgreen99

11-05-2009 12:13 AM

Quote:

Originally Posted by AverageJoe (Post 54237)

Thanks, now if I could get some traction (and possible a driver mod) it might make some respectable times. I have a set of telstars, but it will be a while before I can afford some et streets for them.

I cant drive :hide:, but Darryl Buckner can row some damn gears....if you can get him in a F body! :bigthumb:

91notch

11-05-2009 12:28 AM

Quote:

Originally Posted by dkbmxer002 (Post 54215)

haha, thats actually the bike mike rides, though his is black.

Yep, but minus the training wheels lol. It's a damn good bmx bike.

Matts94Z28

11-05-2009 01:11 AM

Joe, use Corey as your driver mod.

AverageJoe

11-05-2009 06:50 AM

Quote:

Originally Posted by Matts94Z28 (Post 54295)

Joe, use Corey as your driver mod.

Are you saying I'm FAT?

Matts94Z28

11-05-2009 03:12 PM

No... I am saying he weighs less than Lisa and knows how to shift!

:poke:

soccerspike15

11-05-2009 03:51 PM

Quote:

Originally Posted by Matts94Z28 (Post 54385)

No... I am saying he weighs less than Lisa and knows how to shift!

:poke:

shift a auto

LXtasy

11-05-2009 03:57 PM

mr trident ftw. go mt drag radials. i am sure you can borrow some wheels from some body that will fit. run that 8.90 pass that you are after boyee

AverageJoe

11-05-2009 04:05 PM

It'll take a lot more than tires to get me to 8.90's, now if was towing a red blazer that might do it!

Magoo

11-05-2009 04:22 PM

Quote:

Originally Posted by slowgreen99 (Post 54280)

I cant drive :hide:, but Darryl Buckner can row some damn gears....if you can get him in a F body! :bigthumb:

No kidding, for an auto guy M'fer can drive the shit out of a manual!

bwelch

11-05-2009 05:51 PM

just tell Darryl its got a 302 swap and he will drive it.

LXtasy

11-05-2009 05:55 PM

Quote:

Originally Posted by AverageJoe (Post 54409)

It'll take a lot more than tires to get me to 8.90's, now if was towing a red blazer that might do it!

Hell, than it would be pulled faster than it runs

Illusions

11-05-2009 06:19 PM

hey now I like my slow shit. :D

All times are GMT -4. The time now is 01:42 AM.

Page 5 of 5

« First

Show 40 post(s) from this thread on one page