motor pull today...
 

http://i53.photobucket.com/albums/g5...4/100_0243.jpg
http://i53.photobucket.com/albums/g5...4/100_0240.jpg
http://i53.photobucket.com/albums/g5...4/100_0228.jpg
http://i53.photobucket.com/albums/g5...4/100_0229.jpg
http://i53.photobucket.com/albums/g5...4/100_0231.jpg
http://i53.photobucket.com/albums/g5...4/100_0236.jpg

just some random pictures i took

Who are those ugly bastards? LOL J/K

hat hair ftl lol, along with tranny fluid in it haha

Ut o.....Go Fast time!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

i think you could have used a few more people to help:hide:

SHorts... musta been warmer down there than it was here.

well they helped a little mostly me and cory did the work, they were waiting on the pizza lol

let me port your heads for a minimal fee:poke:

they are already at the machine shop :cheers got 3 extra boxs of pizza though lol

at machine shop for what? just a valve job? are you changing springs? are they setting installed height? which machine shop?

group 1, ill let my secrets out i just like having fun with the car

http://advancedinduction.com/AiProductsGMLS1.html they are milling them and doing a custom grind camshaft

along with -4cc mahle forged pistons, ealge h beams should be here tomorrow according to ups
fast 90/90 setup

good for you. looks like a good deal. a 50 cfm increase is 100hp:bigthumb:

yeah i didnt know it took that many people to take out an engine!!:confused:

theres a guy on fast gm making 430rwhp with their heads and stock camshaft, and another guy with their stock ported heads, camshaft on a ls2 making 502rwhp

let the breaking of shit begin

haha 10 bolt ftl!!! :hide:

Read my sig. Thank you

y not build the 9 inch instead of selling it? Or buy that 8.8 on Craigslist.

im just throwing numbers out there, but yes brandon i know that :yourock:

Certain GM guys and dyno numbers....I wont say any names.

...

Guess how fast my car is... :hysterical:




http://i28.photobucket.com/albums/c2...3/Matt_LT1.jpg

jeez! must be a 6 second car!

that proves it right there my car lets just say 385rwhp with cam(just guessing never dynoed) ran 8.0 matts car prob has 7.60 as it sits right now as far as a know and it made 330rwhp

Ummm, I ran a 7.84 and my car wont see 300hp.....so if I get it to 500, ill be running Wes I guess.

It won't do anything as it sits right now... My best time in the car was a 7.8x and my best mph in the car has been 94mph which is questionable at dorchester. The last pass I ran an 8.1x at 88 without spinning one bit and basically leaving off of idle. The car still bumped the limiter on the 2-3 and was shifting @ 6800. I have since had the tune patched up and the shift points lowered. These were all made on street tires.

You would think the car runs 9's with a sheet like that but then again the converter wash flashing really high and trans was on it's way out.

sorry if i said anything inappropriate but it proves hp numbers dont mean anything but again its nice to see what they do put out

Whats wrong with running 9's????? Mach Killer and Perm love it.

:hide:

Nothing was wrong with what you said Greg, it was actually pretty acurate for once! LOL

Brandon, are you going to be ready for a rematch when dorchester opens back up?

My cars is gonna be under the knife soon, but if I still have the stock motor in, and find DR's, then yea. I wanna see what 130K miles, stock 2v, and a 125 shot do.......did I mention STOCK 2v? and OEM clutch! hahah, could get very interesting.

i wanna help the under the knife :bigthumb:

Yeah I have seen some of the pictures... Should be fun. Maybe you can give me something since you are spraying all that gas!

you gotta fix yours tho so I can tear a "780 hp" LS1 car up.

haha, y? You just said you went 7.8 on street tires from idle....I did that on my biggest pill on drag radials :finger:

355-281=74
you have a whole honda motor there to help you out. :poke:

HA, I never looked at it like that... The run against you was from an Idle... not that it matters. I am sure you will be faster than 7.6's though... we will work something out Maybe I can spray both kits on my car for a total of 63hp. I heard gregs car was going to be the first car in the 3's on stock tires and water pump.

hahahahah lmfao! YEEEEAAAAA, 3's....on his way to a fuckin low 8.

hahahah stop hating son! :hysterical: im looking at buying those 315/35/17 hooserdaddy drag radials

I got some 27x11.5s sitting here waiting to go on the car. Should work well with the 3.73's.

our cars are gonna be broke again with broken rearends lol :hysterical: i gotta save up FAST for that 9inch