|
Looks good man! what kind of power are you expecting?
|
what ever it will take to get a 9.99 et. but going to have three modes on the boost controller.
wg setting 8psi = 650whp 8psi bc A mode = 650whp but with less lag, full spool at 3k 14psi bc B mode = 800whp for the track 18psi bc scramble mode = 9XX/???? BOOM p.s. still stock ls2 beside cam. |
lookin good.
|
Impressive! :cheers
|
I love it. I can't wait to see it in action.
|
going to grab some skinnies and some 28" hoosiers, so i can be like shawnyboy and do some tire totin. lol
|
Quote:
|
looks good Carl!
|
Quote:
|
Quote:
why not upgrade to a forged setup. i see a new motor in your future. the turbo setup looks good. |
Very nice carl. Looks like it was a fun install
|
Hell yeah thats gonna give a zr1 a bad day.
|
Very nice!
|
should have put them on a fast car...
|
Quote:
|
yea, i know, 136 trap is nuttin compared to those mustwangs
|
Quote:
|
Quote:
|
im sure yall could run the cobra's and the vette. lol. or find someone with a built cobra. love the car carl. now if you werent such a vagina
|
street car
|
when do you plan on going to the track? and which one?
|
bowman to do some shakedown's then to darlington asap. im not sure if i want to put it on the dyno.
|
Quote:
|
Me thinks your going to have a lot of bugs to work out but I cant wait to see it when you do.
|
pull half the plugs then maybe i can keep up.
|
I just finished reading your thread on the corvetteforum. Did you finish it yesterday, like you hoped?
|
yep, done, i just need to find time to goto masterbend and get the midpipes v-banded to connect to the downpipes. im hoping boss will let me out early on Tuesday. as of right now, the h-pipe is being held up with safetywire, open dumps. kinda loud. lol
-Carl |
Sweet...
I kinda read over it, but what was the problem with the driver's (I think) pipe? I know you had to carve away at some of the fender, but was that it? I saw you returned some piping. |
lil update:
I checked for boost leaks and had a ton of them! every coupler leaked,bov's, even the back of the compressor cover leaked like a son of a bitch! tighented down the couplers, added rtv to the bov's flange and got some anaerbolic sealant for the compressor cover and took car of that. then i thought i had a vacuum leak, turns out it was just crazy turbulence in the maf, need to get a screen, but for now i just switched to Speed Density closed loop. car purs like a kitten. just a lil surge during a cold start for 30 seconds i need to iron out. This is a screen shot of me trying to run Waste Gate pressure which is 6-8psi http://i101.photobucket.com/albums/m...stcreepmaf.jpg umm, 13psi, wtf.. oh well, going to hook up the boost controller and see if commanding 13psi will cover up the boost creep or just make it worse. if it gets worse then ill upgrade to external w/g's -Carl p.s. car is offically faster then the supercharger setup with 3.25 pulley with a time of 4.44 seconds from 50-110, can't wait to get the 13 psi down low around 3500rpms. can you say rocket ship? |
Going to be nasty!
|
Wow that was alot of work. It looks badass though, what kind of times are you shooting for?
|
Very nice, looks like you got a decent starting tune on there, no knock, but then again your timing is really low too. I wish I could take a ride lol.
|
That is some serious boost creep. Dual external wastegate dumps would sound awesome, given that you don't have to drive the car all the time.
|
i checked the waste gates, they both crack open at 7.8 psi and then fully open at 12.1 psi.
dont let the low timing fool you, you only want enough to get the job done, no need to go past MBT. a lot comes down to the combustion chamber, the more efficient the heads, the lower the timing required. 14 degrees is about the highest i will go, remember this is a high compression engine 10.9:1 with 14psi. oh and on the vitamin E. -Carl oh, final goal is 9.99 et, which i believe i have the power for, but now i just need to get some wheels and pray to god the stock rear and stock trans hold. im no power shifter.. |
Quote:
|
93 ? meth ?
|
Quote:
|
Quote:
You should have the power for 9.99, now if you can get the 60ft needed for a 9.99 may be a better question. |
I've never seen to much custom tuning with anything other than a 4G63. I thought your timing was low as well but it makes sense with compression so high. I like to shoot for 17 degrees with my engine but I only have 8.8:1 compression.
Good luck to you on getting the rear end and trans to hold a 9.99 pass. Let us know on here when you are going to try. I would like to cheer you on and buy you a celebratory beer. |
| All times are GMT -4. The time now is 09:13 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.