AOD in a classic stang?
 

I want to put an AOD in my 70 mustang. I know it will physically bolt in,
however is the trans mount going to line up? Is there a TV cable or linkage?
Or a TPS? I already have an idea about the stall for the converter and gearing for the 8 inch....
all of my swapping/restification experience has been on gm products... if it was a th700 or th2004r i'd be elbows deep in atf.....

more than you ever wanted to know:
http://www.tccoa.com/articles/tranny/index.html#


Summit FMC46L - Summit Ford 4.6L Modular Engine with 4R70W Automatic Transmission Combos

Engine and Transmission Combo, 260 HP, Ford, 4.6L SOHC Engine, 4R70W Transmission, 1999-2004, Each


$3,895.50

Each engine is equipped with these Ford components:

* Brand new 4R70W automatic transmission
* Performance Improvement 2V heads
* ECU
* Engine wiring harness
* Custom performance air intake
* MAF sensor
* Starter
* Shifter and cable assemblies
* Power steering pump
* A/C compressor

Warranty

yes it is... THANK YOU!

If you are looking to put an AOD behind a carbureted mill, Lokar makes the appropriate TV cable linkage that will work with carburetors.

damn that motor tranny combo seems like a hell of a deal.

or a manual valve body. :bigthumb: