FS: Centerline Telstars
 

I am selling a set of pristine Centerline Telstars, 5x4.75 bolt pattern, 15x4 fronts and 15x10 rears with 7.6" backspacing. There are 4 center caps, but they have 2 different style centerline logos. Fronts have Kumho radials with lots of tread, no tires for rears. The rears are new and have custom backspacing.

sold

The rears will not fit an f body without grinding lt1 style brakes and 7/16 spacers due to custom backspacing. The fronts will fit ls1 brakes with a 3/16 spacer.

Frdnemesis originally owned these wheels and says they fit over his 95 lt1 brakes with no spacer. My car has 93 brakes.

Sucks that you are selling them! They are a very nice set of wheels and look brand new... this is a great deal for some nice wheels.

Here's a pic of my car with the fronts

http://i47.photobucket.com/albums/f1...acktrim001.jpg

looks fast!!!!

Only one of those two words is true...

Joe, i keep looking at these. we met down Robert's other day when you had the car on the lift.

i keep wondering why don't i see if these will fit my nova, and we work a trade on my Z06 rims

i am not too sure about your BS, though.

http://charleston.craigslist.org/pts/1481810728.html

i need to get a F-body up in the air, so i can spin the tires to clean up the lip.

i would have to get the Nova jacked up to see if the will fit the rears, Nova is mini tubbed, but axles are stock, so the BS may work in my favor.

Sorry, don't like z06 motorsports. May be able to work a trade for some other wheels though. Maybe TTIIs, y2k, hp evo, etc...

joe,

dang Weld's are expensive...i might as well test fit these before i buy welds.


gonna shoot ya PM.
john

http://i19.photobucket.com/albums/b1...a/DSC00863.jpg

http://i19.photobucket.com/albums/b1...a/DSC00865.jpg

http://i19.photobucket.com/albums/b1...a/DSC00867.jpg

they look NICE...

http://i19.photobucket.com/albums/b1...h_DSC00870.jpg

they have too much back space for me, puts the rim right up to the leaf spring.

would have the tires into the inner fender.

i am wondering how a one inch spacer would do, looks like i have the lugs to run the spacer, ??

Do EEEET!

get em

You could always run a hub-centric spacer with the studs built in.
http://www.dvsrestorations.com/images/wheel-spacers.jpg

most of the spacers I see on ebay are $100 a set if they are very thick.

that makes it cheaper just to buy a new set of welds.


but these are sure sexy. if you did not know the center had been moved, i don't think anyone could tell.

They would fit my Blazer perfect, just waiting on funds. :(

Then I will have a set of Greg Welds for sale. They look like these 15x8 (4.5 BS)

get em

Working on that now, I just hope I have enough power to turn them. :(

Might have my greg welds sold.

Sold, thanks Hal

nah thank you Joe, now all i need is some rubbe

still slow

race blazer