Mustang 302 parts F/S
 

..

That stuff shouldn't be hard to sell at those prices. GL Jeff....

Will that e303 work with all stock shit????

Yes

will those injectors work for 6lbs of boost?

Yes, if you use an FMU. I wouldn't go over 6lbs w/ 24lb injectors.

So.....Your saying that the E303 will work fine with the stock springs and rockers. Where or What town are you in???

You can run a e303 with stock heads with stock springs and the stock 1.6 rocker. Ive ran a e303 with stock cast iron gt40s,with the stock springs and a 1.7 rocker with no problem. But if you are all stock you are wasting your time with a cam swap anyway.

Heads, springs and rockers all stock as we speak. I do have a set of 1.7 rockers im going to install along with an Hartmen Intake and it has BBK shoties on it now. I was looking at an B303 but I seen this E303 and didnt know if it would need more springs also. Not after the worlds fastest car just a little better sound!!!!!!

Added some more parts to first post.

took the old S trim off? going NA now?

Updated

ttt