Carolina Horsepower - View Single Post

Ronnie · 04-13-2008, 09:40 PM

I finally installed the roll ball kit that I had picked up from JJ@WMS at FFW in Richmond, VA like almost 2 years ago. Thanks for having this kit developed! The job came out very nice and I am satisfied. Now, I can be legal to run at FFW to 10.00. Any faster, in which I hope so, then I guess it is time for a 8 pt or 10 pt cage. I have some big plans in the works and this part had to be completed.

Here are some pictures. Enjoy!

Bars going through the back glass. I live by a military post and sew shops can sew just about anything. I am going to have black zippers sewn in on the cover.

Picture of the Main Hoop. All the bars are primed and I will be painting them in the near future. That should take a weekend!

Another picture of the Main Hoop from a different angle

Swing out pin

Lower part of the swing out going to the frame

Swing out arm

Picture of the truck:

Next up is to finish up the fuel system

Just a picture of the engine

04-13-2008, 09:40 PM	#1
Ronnie Member Join Date: Nov 2007 Posts: 42	Roll bar install on the L! I finally installed the roll ball kit that I had picked up from JJ@WMS at FFW in Richmond, VA like almost 2 years ago. Thanks for having this kit developed! The job came out very nice and I am satisfied. Now, I can be legal to run at FFW to 10.00. Any faster, in which I hope so, then I guess it is time for a 8 pt or 10 pt cage. I have some big plans in the works and this part had to be completed. Here are some pictures. Enjoy! Bars going through the back glass. I live by a military post and sew shops can sew just about anything. I am going to have black zippers sewn in on the cover. Picture of the Main Hoop. All the bars are primed and I will be painting them in the near future. That should take a weekend! Another picture of the Main Hoop from a different angle Swing out pin Lower part of the swing out going to the frame Swing out arm Picture of the truck: Next up is to finish up the fuel system Just a picture of the engine __________________ '03 Lightning 10.50 @ 128.50 19PSI Truck built & tuned by AVT Performance New motor combo in the works!!!