Quote:
Originally Posted by chrisheltra
Dont go by the color pinouts. My cable didnt match up to what they said. I actually had to use a multimeter to determine which color wires go to the 3 pins mentioned.
This is how my ended up being connected rather than what the directions said.
Wire.............................................. ........................LC-1 Harness
Top Right pin........Grey................................... .........Brown
Middle Right pin.....Green..................................... .....Yellow
Bottom Right pin....Brown...................................... ....Ground
Refer to above probably your problem.
When I did mine I just hit the "reset to default" button. Try that and see if it works for you
If you need some help and need me to talk you throug it give me a call @ 843 412 4046
|
Yea,thats how I'd do it.............