Chop the axle tubes off a F body 10 bolt and weld them on the 8.8. Then fab the torque ARM mount using some 1/4 inch steel plate and 1/2" tube. There are a couple good threads on tech showing the torque mount. You will probably have 8-12 hrs into the fab work which is still cheaper than a 2500 plus 12 bolt, Dana, or 9".
__________________
[IMG]  [/IMG]
1999 WS6, 6.0L, S480, TH400, Dana 60
1967 GTO 496" Poncho stroker, 4 speed, 4:11s
2007 Hemi Ram
2013 Grand Caravan RT
1997 Civic
|