[Matts94Z28]

I'm looking at getting a set of heads pretty cheap that have some damage. The PO used self aligning rockers, gouged the valve locks, and dropped one valve. Is this considered a total loss or could it be repaired reasonably? PAR quoted the owner $300-$400 for a fix.

Originally Posted by merlot566jka

Dropped valve on #1. Needs to be welded up and new seat installed. Needs new retainers. All else is good. About $200-$400 for repair. An excellent deal.
These have approx 2000 miles on them.
more pics available on request.

















***************when new***************







































******************************************
advanced induction site information about heads

http://www.advancedinduction.com/LTX...T4CompHead.php


You will need non-self aligning rockers. I ran self aligning stock lt4 rockers and it caused the damage to the heads. I was not informed of this when I sent the heads out to advanced induction. They "assumed" I would know what they did. Assumptions destroy engines. My loss, your gain.

I paid over $1900 to have these ported and built. Save yourself some serious cash.