[98Camarod]

I got a little done on it. I got the wiring for the alternator completed, finally got my 90* fitting for the rail and finished the fuel system, wired the cooling fans, mounted my meth pump, mounted my meth controller, started wiring the bump box as well. I did have to cut the hanger for my glove box and made a custom stop out of a piece of wire haha!

I found out I need to adjust the ladder bars, they will not allow the driveshaft to bolt up to the rear. I also found out that my shifter cable is too short and I'm unable to loop it to allow for smooth operation. I'm waiting on some tubing to get here so I can fab up my shifter mount. Not too much longer!