Carolina Horsepower - View Single Post

Ka-Chow · 04-23-2007, 12:48 PM

Problem solved. the cam shaft sensor was cut from the ecu somehow and was not reading it which did not let the truck start. total cost from shawn up at ford was 480. NO ECU NEEDED. Thanks for the help guys. I will take a picture of the truck on the side of a mountain for you guys.

04-23-2007, 12:48 PM	#1
Ka-Chow Senior Member Join Date: Jan 2007 Location: Summerville Posts: 712	Problem fixed, Thanks Shawn Randy Mitch Problem solved. the cam shaft sensor was cut from the ecu somehow and was not reading it which did not let the truck start. total cost from shawn up at ford was 480. NO ECU NEEDED. Thanks for the help guys. I will take a picture of the truck on the side of a mountain for you guys. __________________