Quote:
Originally Posted by Ron Burgandy
xmt is a multiprocess without ac tig n syncrowave aint got cv bud
|
If you read what I said, you'll find I said get one with CC/CV and you can do multiprocess.
Quote:
Originally Posted by Ron Burgandy
also top of line syncrowave rated 1/2 "
|
In tig aluminum? So what, who's gonna weld thicker than that with tig? Sure they offer the dynasty 700 that will weld 1" but who's gonna tig weld 1" material? Thats why you would use a multiprocess welder as I suggested.
Your telling me you can't take a syncrowave or a dynasty and hook a suitcase to it and Mig? I hope not, because then everyday I'm performing miricles.
Quote:
Originally Posted by DolSVT00
Get one with the capability to do DC+ DC- AC with High frequency, CC/CV And with the right add ons you can do any type of welding you want. Dont let them sell you the water cooler unless you plan to use it for 10 hours continuoius at a time. Get a spool gun attachment so you can Mig Or FC, get a stinger so you can stick, and get a field rig and some 2% and Pure tungenstone and your coverd ffrom sheetmetal, aluminum from 1/16 to 1" thick plate..........
|
After searching for a minuite and trying to figure out WTF you are talking about I came up with the only statement where I mentioned 1" and any 200+ amp multiprocess welder will weld as many inches thick as you want as long as you don't run out of filler its called a multipass weld. Where did he or I say he was welding 1" thick alumium in a single pass?