Carolina Horsepower - View Single Post

s14.5gonewide · 01-07-2011, 04:17 PM

for the 2 inch tubing

semi thin wall. its only for holding my rods on the side of the cart. but id like all my rod holders to be the same thickness so it looks uniform. 8/10 would be the idea i will also be making surf rod holders to stick in the sand thats why im saying 8/10 peices

with that said a 10ft stick should do me perfect.

so 1ft general size smallest id say would be 10inches
^^ as long as its not an angle cut to make the 10inches straight cut 10..

hope this helps.

i am not sure on the tubing size yet... as far as length.

01-07-2011, 04:17 PM	#5
s14.5gonewide Senior Member Join Date: Sep 2009 Location: north charleston Posts: 1,657	for the 2 inch tubing semi thin wall. its only for holding my rods on the side of the cart. but id like all my rod holders to be the same thickness so it looks uniform. 8/10 would be the idea i will also be making surf rod holders to stick in the sand thats why im saying 8/10 peices with that said a 10ft stick should do me perfect. so 1ft general size smallest id say would be 10inches ^^ as long as its not an angle cut to make the 10inches straight cut 10.. hope this helps. i am not sure on the tubing size yet... as far as length. __________________ Last edited by s14.5gonewide; 01-07-2011 at 04:20 PM.