Carolina Horsepower - View Single Post - Need a mini-starter drilled & tapped to rotate it

minytrker · 01-13-2011, 07:15 PM

I have built over 10 s10's with 350 in them, just make a small heat shield and it will solve all the problems. The last s10 I did had headers, over 400 hp and a stock starter with a homemade heatshield with no problems. I used stock starters and every one and headers almost every one and the heatshield solved all the heat soak problems.

01-13-2011, 07:15 PM	#5
minytrker Senior Member Join Date: May 2008 Posts: 1,089	I have built over 10 s10's with 350 in them, just make a small heat shield and it will solve all the problems. The last s10 I did had headers, over 400 hp and a stock starter with a homemade heatshield with no problems. I used stock starters and every one and headers almost every one and the heatshield solved all the heat soak problems. __________________ 1999 Z28 Camaro\|Cut up 2003 CC Duramax Dually\|19.5 w/245/70/19.5\|5in exhaust 2009 G8 GT 408hp/402tq sae\|Rotofab CAI\|LS9 Cam\|Headers\|GXP Mufflers\|Custom System 2009 Tahoe stock