Another what will it make

Zacharyx · 07-01-2008, 05:13 AM

OK so the rings are done on the stock short block giving me an excuse to build the bottom end. I Made 429/450 on a 100,000 mile stock bottom end with PI cams. What do you guys think I will put down with a fresh stroker bottom end and comp 268h cams at the same 6# of boost?? Think I can make 500?

jmd · 07-01-2008, 07:03 AM

tt

Zacharyx · 07-01-2008, 01:28 PM

I am hoping that the the cams and extra displacement have the turbos spooling quicker

05Saleen · 07-01-2008, 04:34 PM

What compression will you be running?

Jeff · 07-01-2008, 07:34 PM

The real question is what will it run ! Dyno numbers are bullshit in my opinion .

chrisheltra · 07-01-2008, 08:53 PM

Quote:

Originally Posted by Jeff

The real question is what will it run ! Dyno numbers are bullshit in my opinion .

x3487534598743574398759438757345987432598349875983 47598734597349875938745983245987437539487593847598 73453294875984359873247539485974325987348753987459 87234598723498573498593845987349573498593847598439 85743959843759873459873498753294859382475987349857 34987598437598743598743987539485983274598734985734 98573498798437598345987234598734985983745987324987 43987984375984359873249587324984329879438709238475 02398475029384750983274509874320958732049875203948 75098324750982374509872340987523904875938247598374 98734298759843759823709874398572340985943087590328 47598432985732498759384750938745098273459087342987 53294875903284759083745987432985734987543987593847 59837459874359874398753948759083249843759873495874 39873498759843275987435987349875394859834759874398 57439894387594359873245098347095287345098347029487 50329847509238475098743209857234097523049850394285 09283459874398572394875902837450987430987203498759 08743290875092384750987435987345634975908347598734 59874359873249859837459873498759308475098732459823 40985743097530948750923874509873249875239480502983 74509872340985987435980723409875209384750928374590 87324098572349875984375092837450982734509874325987 32498759348759843259832475098743259874325908723950 87209870932485098347598734985743975984375934598734 98753429875983475908298743509872340975092438759087 43509874390720943850239843750987234975983274509873 42509873459873985794387598374598743987987934859874 35987459873429877529875987435987234985987435987230 94509243875902834509872435098743987592834759872435 98734297594328759823745987439275209837459087243987 59432875934857032475023487598432759834759827345987 34975938475987345987324098572349759759874359874398 75234987502938509802340598234097502937098724509872 09784509827450928759879384759832745987435908723409 87543987509284375984375987432509873450987432987594 37598437598743985734987593847598743598743598720948 75092837450982743509872439875984375092874598723498 75943875928345987243598723497984375987345987432598 73487529387459874359874329875209824509782340987575 20983745092873459874375230948750983274509287435723 94759284375982743598743298754398598374259802349587 23409752093450987234987523497592834759827435987459 87230497520943859843759872340957234098509432875987 43259872309875439875983745987432598734975093284759 87435987439875798437590843275987435987324987598437 98374598743598734875203948759084327597435987234984 35987324598745974398798435984359874598798437502938 45092843750982743598743217529843759823745987345987 34875943875092834750987435908743298753947590843275 098743250987349875234098

sorry the commercial was long

Zacharyx · 07-02-2008, 03:23 AM

Quote:

Originally Posted by Jeff

The real question is what will it run ! Dyno numbers are bullshit in my opinion .

While I like timeslips it will be longer to get it to the track to than to get it on a dyno. I figure I can be in the 10's one i is finished

Jeff · 07-02-2008, 11:14 AM

Now that's what I like to hear ! 10's is a good goal !

slowgreen99 · 07-02-2008, 11:20 AM

Quote:

Originally Posted by Jeff

Now that's what I like to hear ! 10's is a good goal !

I go 10's

Jeff · 07-02-2008, 12:38 PM

Must be nice ! Maybe I should change gears so I can pick up 2.5 seconds !

perm102 · 07-02-2008, 01:19 PM

Can't dyno numbers give you an indication of what it "should" run? I know a lot of variables come into play when taking the car down the track but it gives an estimate. Maybe?

Jeff · 07-02-2008, 01:31 PM

No ! I don't know how many 03/04 Cobras make 500+rwhp and run 12s i've seen on forums . They get shit all the time like the Supras use to .

Mike · 07-02-2008, 02:13 PM

Especially with a manual car, and some non driving fools. lol

perm102 · 07-02-2008, 02:22 PM

Quote:

Originally Posted by Jeff

No ! I don't know how many 03/04 Cobras make 500+rwhp and run 12s i've seen on forums . They get shit all the time like the Supras use to .

Granted but that is driver mod. I am saying that power made and weight should be an estimate or best guess. You can get an idea if the driver can drive or not.

jmd · 07-02-2008, 03:02 PM

Quote:

Originally Posted by Mike

Especially with a manual car, and some non driving fools. lol

hey i resent that remark. i have a 600+ rwhp car and i do 15's all day.

Zacharyx · 07-02-2008, 07:24 PM

I figure on the same boost (6#) I should be able to get into the low 11s high 10s and we will just have to see what it does on higher boost and spray.

Zacharyx · 07-02-2008, 07:27 PM

Quote:

Originally Posted by 05Saleen

What compression will you be running?

should be 9:1 depending on what has to come off the heads and block to get them flat

Zacharyx · 07-06-2008, 10:29 AM

ALright everyone hope and prayt hat everything shows up at the machine shop monday so I have a chance of having it back by the end of the week. That way I have a week to work out bugs before the car goes to MW08

07-01-2008, 05:13 AM	#1
Zacharyx Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 330	Another what will it make OK so the rings are done on the stock short block giving me an excuse to build the bottom end. I Made 429/450 on a 100,000 mile stock bottom end with PI cams. What do you guys think I will put down with a fresh stroker bottom end and comp 268h cams at the same 6# of boost?? Think I can make 500?

07-01-2008, 07:03 AM	#2
jmd Senior Member Join Date: May 2008 Posts: 3,177	tt __________________ Cadillac man Last edited by jmd; 07-01-2008 at 02:12 PM.

07-01-2008, 04:34 PM	#4
05Saleen Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 3,159	What compression will you be running? __________________ 05 Saleen, 91 Mustang LX, 99 Lightning

07-01-2008, 07:34 PM	#5
Jeff Senior Member Join Date: Feb 2007 Posts: 1,015	The real question is what will it run ! Dyno numbers are bullshit in my opinion . __________________ Boat .

07-02-2008, 11:14 AM	#8
Jeff Senior Member Join Date: Feb 2007 Posts: 1,015	Now that's what I like to hear ! 10's is a good goal ! __________________ Boat .

07-01-2008, 01:28 PM	#3
Zacharyx Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 330	I am hoping that the the cams and extra displacement have the turbos spooling quicker

07-02-2008, 12:38 PM	#10
Jeff Senior Member Join Date: Feb 2007 Posts: 1,015	Must be nice ! Maybe I should change gears so I can pick up 2.5 seconds ! __________________ Boat .

07-02-2008, 01:19 PM	#11
perm102 Senior Member Join Date: Feb 2007 Location: Goose Creek Posts: 892	Can't dyno numbers give you an indication of what it "should" run? I know a lot of variables come into play when taking the car down the track but it gives an estimate. Maybe?

07-02-2008, 01:31 PM	#12
Jeff Senior Member Join Date: Feb 2007 Posts: 1,015	No ! I don't know how many 03/04 Cobras make 500+rwhp and run 12s i've seen on forums . They get shit all the time like the Supras use to . __________________ Boat .

07-02-2008, 02:13 PM	#13
Mike Senior Member Join Date: Dec 2006 Location: Goose Creek, SC Posts: 5,481	Especially with a manual car, and some non driving fools. lol

07-02-2008, 07:24 PM	#16
Zacharyx Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 330	I figure on the same boost (6#) I should be able to get into the low 11s high 10s and we will just have to see what it does on higher boost and spray. __________________ Educatio est omnium efficacissima forma rebellionis "And the dynos rumbled, and God spoke 'Take thine turbo, install it upon thine car, and destroy the many ricers!' Moderato est figmentum

07-06-2008, 10:29 AM	#18
Zacharyx Senior Member Join Date: Aug 2007 Location: Savannah GA Posts: 330	ALright everyone hope and prayt hat everything shows up at the machine shop monday so I have a chance of having it back by the end of the week. That way I have a week to work out bugs before the car goes to MW08 __________________ Educatio est omnium efficacissima forma rebellionis "And the dynos rumbled, and God spoke 'Take thine turbo, install it upon thine car, and destroy the many ricers!' Moderato est figmentum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode