Carolina Horsepower  

Go Back   Carolina Horsepower > Technical > Manufacturer Specific Tech > Ford Tech
Register FAQ Community Calendar

Reply
 
Thread Tools Display Modes
Old 02-27-2012, 08:53 PM   #1
BigdaddyDupree
Senior Member
 
BigdaddyDupree's Avatar
 
Join Date: Jul 2008
Location: MACEDONIA
Posts: 4,967
Default 7.3 powerstroke cranking issue

My truck is a 99 f350, it has been running flawless accept for the last fe weeks its been having cranking issues. Sometimes it spins over flawless and fires right off. Other times it spins over very slow, not fast enough to crank up, but if i let off the key and hit it again then it cranks perfect. and its intermittent so its very hard to track down. New batteries, so i either have it narrowed down too the cables or the starter. but how do i narrow it down to which?
__________________
. What you wanna do?
BigdaddyDupree is offline   Reply With Quote
Old 02-28-2012, 08:51 AM   #2
BigdaddyDupree
Senior Member
 
BigdaddyDupree's Avatar
 
Join Date: Jul 2008
Location: MACEDONIA
Posts: 4,967
Default

Anybody have ideas?
__________________
. What you wanna do?
BigdaddyDupree is offline   Reply With Quote
Old 02-28-2012, 09:04 AM   #3
KRYPTONITE
Senior Member
 
KRYPTONITE's Avatar
 
Join Date: Apr 2008
Posts: 3,484
Default

Check to see how much Volts. you have going to the starter
__________________
The Hired HIT MAN
KRYPTONITE is offline   Reply With Quote
Old 02-28-2012, 09:05 AM   #4
KRYPTONITE
Senior Member
 
KRYPTONITE's Avatar
 
Join Date: Apr 2008
Posts: 3,484
Default

Might be a Bad connection, Ground or power
__________________
The Hired HIT MAN
KRYPTONITE is offline   Reply With Quote
Old 02-28-2012, 10:10 AM   #5
CHEVYMAN434
Senior Member
 
Join Date: Nov 2009
Location: pineville sc
Posts: 671
Default

MIne does that sometime too.Sometimes i jump in it and it spins over to slow for it to crank.Its still spinnin good but just not quit fast enough.I have found that its because the battery cables are loose.They dont feel loose but if you put a pair of channel locks on them they will turn just a little.I think they just get corrosion on them and the little turn lets it get all the juice...
CHEVYMAN434 is offline   Reply With Quote
Old 02-28-2012, 10:39 AM   #6
Bradleyrj
Senior Member
 
Bradleyrj's Avatar
 
Join Date: May 2008
Location: Myrtle Beach
Posts: 2,347
Default

Can you test continuity through a cable? Test at each end to make sure the cables are getting the power to the starter?
__________________
Bradleyrj is offline   Reply With Quote
Old 02-29-2012, 03:56 PM   #7
cliff-1972
Senior Member
 
cliff-1972's Avatar
 
Join Date: Feb 2011
Location: Moncks Corner,S.C
Posts: 292
Default

If you need a starter I have one
__________________
1964 Impala 468BBC,T350 transbrake,4.30 9",10 point and 10.5 M/T's

1996 F250 4X4 12V Cummins,compound turbo 63mm over 75mm,cam,520cc pump,full billet 4R100 563hp&936ft.lbs w/a bad fuel pump and on a dynojet...just an old hunting truck
cliff-1972 is offline   Reply With Quote
Old 04-24-2012, 08:43 PM   #8
billy
Senior Member
 
Join Date: Mar 2012
Location: summerville
Posts: 53
Send a message via Yahoo to billy
Default

try starting fluid it will crank wright up that means the glow plug is bad that what mine does thats the mean problem with the diesel engine
billy is offline   Reply With Quote
Old 04-25-2012, 10:17 AM   #9
blueyed tuner
Senior Member
 
blueyed tuner's Avatar
 
Join Date: Nov 2011
Location: Summerville SC
Posts: 214
Default

May want to try a starter solenoid. On my 7.3 onetime, I replaced the batteries, the cables, then the starter. Come to find out, it was the solenoid on the fenderwell. The get pitted and burnt over time. Its about a 12 dollar part that in the long run I paid about 800 dollars chasing. Its always the simple stuff that bites you. Good Luck.
__________________
blueyed tuner is offline   Reply With Quote
Old 04-25-2012, 11:55 AM   #10
04ctd
Senior Member
 
Join Date: Aug 2009
Location: Ladson SC
Posts: 4,388
Default

i take a wire wheel on a drill and clean up battery ends.

I got a Fluke DVM if you need it.

if the crimp is loose on some wires, the copper can turn green inside the connector, and not make connection, spent few hours chasing that one last week. wire only had connectivity if you jammed the DVM lead down in the wire
__________________
1 Timothy 3:16
16 And without controversy great is the mystery of godliness:
God was manifested in the flesh,
Justified in the Spirit,
Seen by angels,
Preached among the Gentiles,
Believed on in the world,
Received up in glory.
04ctd is offline   Reply With Quote
Old 04-25-2012, 04:23 PM   #11
outlawts
Senior Member
 
Join Date: Mar 2010
Posts: 402
Default

GET A CHEVY LOL
outlawts is offline   Reply With Quote
Old 04-25-2012, 10:22 PM   #12
billy
Senior Member
 
Join Date: Mar 2012
Location: summerville
Posts: 53
Send a message via Yahoo to billy
Default

Quote:
Originally Posted by outlawts View Post
GET A CHEVY LOL
chevy junk LOL
billy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 04:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.