Ford parts for sale

Darryl Buckner · 01-12-2012, 04:56 PM

For Sale, 1990 Mustang LX hatchback roller. Car is white with red tweed interior, motor and trans has been removed, everything else is there. AC, power steering, Fuel injection harness and computer, new Modine radiator, aluminum drive shaft, solid control arms, white face guages, 16" pony wheels with new tires, trac lock carrier with 3.55 gears. This car was a 5 speed car that was changed to AOD, but easily changed back. Nice interior except drivers seat has a small tear, paint is factory and under a cover, and has a small spot behind drivers door in paint that is messed up. I will post up pics when I figure out how. $2000.00

Wynnspeed 408 Windsor. Stock block, forged rotating assembly, forged flat top pistons with almost 11:1 compression. 7 quart Moroso oil pan, hydrolic roller cam, roller lifters, roller rockers, Brodix heads with 2.08 intake valves, Edelbrock Victor Jr black powder coated intake, MSD pro billet distributor, big plug wires, Edelbrock aluminum high volume water pump, Melling high volume oil pump, after market balancer, underdrive crank pulley and water pump pulley, tall Chrome aluminum Ford Motorsport valve covers. $3500.00

Ford Mustang AOD transmission. Freshly rebuilt by Gearmech with Lentech manual valvebody with electric overdrive and transbrake. $1000.00

Speedpro file fit rings 4.125 bore. $125.00

ShawnBoyMoody · 01-12-2012, 05:59 PM

Damn guy why didn't you call me on this when my motor spun a bearing?

Darryl Buckner · 01-12-2012, 06:23 PM

Figured you already had one, and was just going to rebuild the one you had.

ShawnBoyMoody · 01-12-2012, 06:28 PM

I had a 362 about to put together a 357.

ShawnBoyMoody · 01-12-2012, 06:30 PM

You hate me.

Darryl Buckner · 01-12-2012, 06:33 PM

I thought you were doing a 408, but you know what happens when you think. No hate at all.

ShawnBoyMoody · 01-12-2012, 06:44 PM

I wanted to build a 408, the money just wasn't there. At least not the way I wanted to build it.

Bradleyrj · 01-12-2012, 08:37 PM

I would like the AOD but cant right now.

toybreaker · 01-12-2012, 11:29 PM

wanna trade a 540I and $500 for the 408?

Darryl Buckner · 01-13-2012, 10:02 AM

Quote:

Originally Posted by toybreaker

wanna trade a 540I and $500 for the 408?

No room, trying to liquidate, but thanks..

Darryl Buckner · 01-13-2012, 10:07 AM

Found the build sheet. Its zero balanced, has a fluid damper, main studs with girdle, head studs, all bolts and studs are ARP. Diamond forged pistons. Comp cams camshaft with @.50 232/240, 566/576 lift with 1.60 rockers, and 112 center (nitrous friendly). Grind# FW3634/3636HR112. Motor made 502hp and 548 torque at the flywheel at 5000rpm on 112 fuel, engine dyno.

ShawnBoyMoody · 01-13-2012, 10:50 AM

Quote:

Originally Posted by Darryl Buckner

Found the build sheet. Its zero balanced, has a fluid damper, main studs with girdle, head studs, all bolts and studs are ARP. Diamond forged pistons. Comp cams camshaft with @.50 232/240, 566/576 lift with 1.60 rockers, and 112 center (nitrous friendly). Grind# FW3634/3636HR112. Motor made 502hp and 548 torque at the flywheel at 5000rpm on 112 fuel, engine dyno.

I hate you. Lmao.

Darryl Buckner · 01-13-2012, 11:50 AM

Quote:

Originally Posted by ShawnBoyMoody

I hate you. Lmao.

I still have it, return the other stuff.lol

bwelch · 01-13-2012, 01:14 PM

What year is the block?

Darryl Buckner · 01-13-2012, 01:21 PM

No clue. numbers are usually in the lifter valley or inside the pan, didn't see any numbers outside. I would assume its 70s to 80s model..

toybreaker · 01-13-2012, 01:28 PM

didn't expect it but doesn't hurt to ask.....

Darryl Buckner · 01-13-2012, 01:34 PM

No problem..

Harry · 01-13-2012, 10:15 PM

Posting Pics for Darryl. More Exterior and Engine Bay to come tomorrow.

ShawnBoyMoody · 01-13-2012, 10:16 PM

Love to have that.....

Harry · 01-13-2012, 10:18 PM

Could be yours for the low low low price of $2000.

01-12-2012, 04:56 PM	#1
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	Ford parts for sale For Sale, 1990 Mustang LX hatchback roller. Car is white with red tweed interior, motor and trans has been removed, everything else is there. AC, power steering, Fuel injection harness and computer, new Modine radiator, aluminum drive shaft, solid control arms, white face guages, 16" pony wheels with new tires, trac lock carrier with 3.55 gears. This car was a 5 speed car that was changed to AOD, but easily changed back. Nice interior except drivers seat has a small tear, paint is factory and under a cover, and has a small spot behind drivers door in paint that is messed up. I will post up pics when I figure out how. $2000.00 Wynnspeed 408 Windsor. Stock block, forged rotating assembly, forged flat top pistons with almost 11:1 compression. 7 quart Moroso oil pan, hydrolic roller cam, roller lifters, roller rockers, Brodix heads with 2.08 intake valves, Edelbrock Victor Jr black powder coated intake, MSD pro billet distributor, big plug wires, Edelbrock aluminum high volume water pump, Melling high volume oil pump, after market balancer, underdrive crank pulley and water pump pulley, tall Chrome aluminum Ford Motorsport valve covers. $3500.00 Ford Mustang AOD transmission. Freshly rebuilt by Gearmech with Lentech manual valvebody with electric overdrive and transbrake. $1000.00 Speedpro file fit rings 4.125 bore. $125.00 __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

01-12-2012, 05:59 PM	#2
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Damn guy why didn't you call me on this when my motor spun a bearing? __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

01-12-2012, 06:23 PM	#3
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	Figured you already had one, and was just going to rebuild the one you had. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

01-12-2012, 06:28 PM	#4
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	I had a 362 about to put together a 357. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

01-12-2012, 06:30 PM	#5
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	You hate me. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

01-12-2012, 06:33 PM	#6
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	I thought you were doing a 408, but you know what happens when you think. No hate at all. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

01-12-2012, 06:44 PM	#7
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	I wanted to build a 408, the money just wasn't there. At least not the way I wanted to build it. __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

01-12-2012, 08:37 PM	#8
Bradleyrj Senior Member Join Date: May 2008 Location: Myrtle Beach Posts: 2,347	I would like the AOD but cant right now. __________________

01-12-2012, 11:29 PM	#9
toybreaker Senior Member Join Date: Sep 2009 Location: Piti, Guam Posts: 203	wanna trade a 540I and $500 for the 408? __________________ I am too good for something! I set a very bad example!

01-13-2012, 10:07 AM	#11
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	Found the build sheet. Its zero balanced, has a fluid damper, main studs with girdle, head studs, all bolts and studs are ARP. Diamond forged pistons. Comp cams camshaft with @.50 232/240, 566/576 lift with 1.60 rockers, and 112 center (nitrous friendly). Grind# FW3634/3636HR112. Motor made 502hp and 548 torque at the flywheel at 5000rpm on 112 fuel, engine dyno. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

01-13-2012, 01:14 PM	#14
bwelch Senior Member Join Date: Aug 2009 Posts: 3,774	What year is the block? __________________

01-13-2012, 01:21 PM	#15
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	No clue. numbers are usually in the lifter valley or inside the pan, didn't see any numbers outside. I would assume its 70s to 80s model.. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

01-13-2012, 01:28 PM	#16
toybreaker Senior Member Join Date: Sep 2009 Location: Piti, Guam Posts: 203	didn't expect it but doesn't hurt to ask..... __________________ I am too good for something! I set a very bad example!

01-13-2012, 01:34 PM	#17
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	No problem.. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

01-13-2012, 10:15 PM	#18
Harry Senior Member Join Date: May 2008 Location: Summerville Posts: 3,321	Posting Pics for Darryl. More Exterior and Engine Bay to come tomorrow.

01-13-2012, 10:16 PM	#19
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	Love to have that..... __________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

01-13-2012, 10:18 PM	#20
Harry Senior Member Join Date: May 2008 Location: Summerville Posts: 3,321	Could be yours for the low low low price of $2000.