351w parts

fink406 · 02-17-2010, 01:42 AM

looking for just about anything. got a stock 351 in my new project and it needs some tfl, intake,headers(f150/bronco 4x4 1992) msd dizzy, cam,valve covers,etc..let me know what you got and what you want for it, also any ideas for stroker kits,leave it stock ci,etc..it is 5 speed,4x4,35s will be a daily but i want it to have nuts. thanks

WTFWSAT · 02-17-2010, 03:00 AM

is this a rollor motor?

Ive got a NIB edelbrock flat tappet cam and lifters, dual plane carb intake and probably can dig up a set of valve covers if your interested.

Lemmie know
Chris
906-1558

fink406 · 02-17-2010, 08:22 AM

its a truck motor as far as i know, not sure if its roller. ill check it out. is there a page like mor trech with all the casting numbers,years made, head cc's, etc,etc? chris ill be in touch. thanks

ElecTech · 02-17-2010, 08:40 AM

Got some reconditioned 302 cast iron heads (never run, came off of a 351W), Comp roller tipped rockers and a new set of pushrods. I can check the length if interested. Also have a new set of MSD wire seperators. May have some other misc stuff. I'll even do a package deal to anyone who wants it.

WTFWSAT · 02-17-2010, 09:24 AM

The casting number on the block i think is by the starter. The first 4 characters should be all you need to see what kind of block it is.

It will be something like E7TE-XXXXX

Heres a LINK

bwelch · 02-17-2010, 02:01 PM

Quote:

Originally Posted by fink406

looking for just about anything. got a stock 351 in my new project and it needs some tfl, intake,headers(f150/bronco 4x4 1992) msd dizzy, cam,valve covers,etc..let me know what you got and what you want for it, also any ideas for stroker kits,leave it stock ci,etc..it is 5 speed,4x4,35s will be a daily but i want it to have nuts. thanks

Now I know why its so cold and snowing. You bought a ford...

fink406 · 02-17-2010, 03:51 PM

i did not buy a ford. i trade my black 4x4, minus stereo,optima batteries for the 92 eddie bauer bronco and about 3 grand. the bronco has a 351 (5)brand new nitto mudd grapplers, new procomp 6 inch lift,(5)brand new 17 inch procomp wheels and a bikini top. the bad is the motor could use some work. its efi and it has some vacuum lines crossed, and blocked off, it needs exhaust, and i think the valve stem seals are bad. its a pretty nice truck actually. i said if i ever owned a ford it would be a bronco or something old. deuce coop, 49 bussiness coupe, etc.now i just have to get off my ass and do some work. get my other trans out buick and get it built, control arms from you and some other stuff

fink406 · 02-17-2010, 03:56 PM

and thanks chris ill look into it sometime in the next day or so.

02-17-2010, 01:42 AM	#1
fink406 Senior Member Join Date: Jun 2008 Posts: 546	351w parts looking for just about anything. got a stock 351 in my new project and it needs some tfl, intake,headers(f150/bronco 4x4 1992) msd dizzy, cam,valve covers,etc..let me know what you got and what you want for it, also any ideas for stroker kits,leave it stock ci,etc..it is 5 speed,4x4,35s will be a daily but i want it to have nuts. thanks

02-17-2010, 03:00 AM	#2
WTFWSAT Senior Member Join Date: Nov 2007 Location: Summerville Posts: 861	is this a rollor motor? Ive got a NIB edelbrock flat tappet cam and lifters, dual plane carb intake and probably can dig up a set of valve covers if your interested. Lemmie know Chris 906-1558 __________________ Fastest stock computer 5.0 on the planet! Looking for cheeep msd 6al! PM me! 88 Coupe (turtle) 03 Cobra (tortoise)

02-17-2010, 08:40 AM	#4
ElecTech Senior Member Join Date: May 2009 Location: Charleston, SC Posts: 1,489	Got some reconditioned 302 cast iron heads (never run, came off of a 351W), Comp roller tipped rockers and a new set of pushrods. I can check the length if interested. Also have a new set of MSD wire seperators. May have some other misc stuff. I'll even do a package deal to anyone who wants it. __________________ Jaime Last edited by ElecTech; 02-17-2010 at 10:34 AM.

02-17-2010, 09:24 AM	#5
WTFWSAT Senior Member Join Date: Nov 2007 Location: Summerville Posts: 861	The casting number on the block i think is by the starter. The first 4 characters should be all you need to see what kind of block it is. It will be something like E7TE-XXXXX Heres a LINK __________________ Fastest stock computer 5.0 on the planet! Looking for cheeep msd 6al! PM me! 88 Coupe (turtle) 03 Cobra (tortoise)

02-17-2010, 03:51 PM	#7
fink406 Senior Member Join Date: Jun 2008 Posts: 546	i did not buy a ford. i trade my black 4x4, minus stereo,optima batteries for the 92 eddie bauer bronco and about 3 grand. the bronco has a 351 (5)brand new nitto mudd grapplers, new procomp 6 inch lift,(5)brand new 17 inch procomp wheels and a bikini top. the bad is the motor could use some work. its efi and it has some vacuum lines crossed, and blocked off, it needs exhaust, and i think the valve stem seals are bad. its a pretty nice truck actually. i said if i ever owned a ford it would be a bronco or something old. deuce coop, 49 bussiness coupe, etc.now i just have to get off my ass and do some work. get my other trans out buick and get it built, control arms from you and some other stuff Last edited by fink406; 02-17-2010 at 03:54 PM.

02-17-2010, 08:22 AM	#3
fink406 Senior Member Join Date: Jun 2008 Posts: 546	its a truck motor as far as i know, not sure if its roller. ill check it out. is there a page like mor trech with all the casting numbers,years made, head cc's, etc,etc? chris ill be in touch. thanks

02-17-2010, 03:56 PM	#8
fink406 Senior Member Join Date: Jun 2008 Posts: 546	and thanks chris ill look into it sometime in the next day or so.