make offers.....

1998ta__1991rs · 06-03-2010, 12:39 AM

MDS Pro Billet dist for sbc/bbc with coil----$150
6al box---$125
NOS 2 stage 4150 plate----$60
hayden 16" electric fan----$20
Vortec Heads 062's---$100
New 383 Shortblock, 1 piece rear seal, 2 bolt main, roller block----$1500
Comp 7.4 pushrods---$50
98 Trans am steering wheel with airbag--$50
BMN Nitrous Controller---$75
882 SBC Heads---$20
sub box for dual 10's-----$35
single 12" pioneer in box-----$40
infinity 4x6 plate speakers---$30
cracked ls1 block---$40
ls1 rollermaster double roller timing chain--$50
ls1 water pump--$20
ls1 crank (core)---$20
4 ls1 coil packs---$10 each
2 truck coils----$10 each
3.50 gears for 9"----$50
stock 4l65e torque converter---$25
mobil 1 LS1 oil cap---$5
matco ls1 billet oil cap breather---$35
ls1 cam shell motor mount---$5
2x stock ls1 throttle bodys------$60 with sensors $40 without
2 cheapo 6.5" speakers----$5
fbody pass side airbag with module----$20
new triangle things that go on bottom of fbody sail pannels--$20
LS1 Vally pan with knock sensors-------$40
ev6-ev1 injector harness adapters----$25
msd ls1 plug wires---$30
stock ls2 plug wires with heat shields---$10
bostwic 1 farad cap---$25
stock ls1 pushrods---$10
2 greg weld centercaps---$5 each
alot of stock ls1 valvetrain stuff---$?
cnc ported 98 ls1 heads-----$250
stock ls1 valvesprings-----$?
2 side post batterys-----$10 each

1998ta__1991rs · 06-03-2010, 12:46 AM

O yea, And my House

3br, 2bath, around 1500sqft in Grand Oaks Plantation, $233,000

http://maps.google.com/maps?hl=en&q=...ed=0CBcQ8gEwAA

http://maps.google.com/maps?hl=en&q=...ed=0CBcQ8gEwAA

Carlrx7 · 06-03-2010, 02:30 AM

whats the occasion? how much for the cracked block,, i think i might make a coffee table or something

BAD BOB · 06-03-2010, 07:18 AM

15 for the block. that 383 will work in the truck ill take it for 200, and the mobil 1 oil cap i got to have ill give you 2 for that. LMK

Red99T/A · 06-03-2010, 08:17 AM

might be interested in one of the TBs

silver fox · 06-03-2010, 08:57 AM

Nos 2 stage plate. How much? Do you have any more of the kit or just plate?

slow94 · 06-03-2010, 09:37 AM

might be interested in the 6al box as long as it will work on my truck.

1998ta__1991rs · 06-03-2010, 10:24 AM

Quote:

Originally Posted by Carlrx7

whats the occasion? how much for the cracked block,, i think i might make a coffee table or something

selling the house and dont want to move everything..

1998ta__1991rs · 06-03-2010, 10:24 AM

Quote:

Originally Posted by silver fox

Nos 2 stage plate. How much? Do you have any more of the kit or just plate?

just the plate...$75

04ctd · 06-03-2010, 10:52 AM

buddy of mine lost his house while back.

he makes real good money, but his wife lost her job.
had too much on his plate to cover it all.

that's a good reality check to think about when i want to finance another toy.

67 Camaro's are all over craigslist for $5~10k
its just another bill, and what you gonna do, live in it?
i am fed up with financing stuff.

MonteC · 06-03-2010, 01:59 PM

Quote:

Originally Posted by 04ctd

buddy of mine lost his house while back.

he makes real good money, but his wife lost her job.
had too much on his plate to cover it all.

that's a good reality check to think about when i want to finance another toy.

67 Camaro's are all over craigslist for $5~10k
its just another bill, and what you gonna do, live in it?
i am fed up with financing stuff.

If i cant pay cash for it, i dont need it.

bwelch · 06-03-2010, 02:01 PM

x2

04ctd · 06-03-2010, 02:56 PM

Quote:

Originally Posted by MonteC

If i cant pay cash for it, i dont need it.

exactly..

that's why i have been cleaning the Nova up some.
it's real enjoyable, since it's paid for.

just shine it up a bit, instead of buying a 67 & having to work on both of them. might lay some flat black on it soon

1998ta__1991rs · 06-03-2010, 05:26 PM

more stuff

ev6-ev1 injector harness adapters
msd ls1 plug wires
stock ls2 plug wires with heat shields
bostwic 1 farad cap
stock ls1 pushrods
2 greg weld centercaps
alot of stock ls1 valvetrain stuff
cnc ported 98 ls1 heads
stock ls1 valvesprings
2 side post batterys

LadyInRed · 06-03-2010, 06:10 PM

Do all these parts take up the other two bedrooms in the house?

Ballaholic29414 · 06-03-2010, 06:21 PM

How much for 6al box and hayden 16" electric fan?

1998ta__1991rs · 06-03-2010, 06:29 PM

pm sent

LXtasy · 06-03-2010, 06:30 PM

Who did the cnc work? are these the heads you were talking about? I might interested in the nitrous controller

1 Slow Z · 06-03-2010, 07:46 PM

You don't by chance have a MAF unit laying around to you?

AverageJoe · 06-03-2010, 08:14 PM

I think Jeff might have a spare if Zac doesn't.

06-03-2010, 12:39 AM	#1
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	make offers.....and my House MDS Pro Billet dist for sbc/bbc with coil----$150 6al box---$125 NOS 2 stage 4150 plate----$60 hayden 16" electric fan----$20 Vortec Heads 062's---$100 New 383 Shortblock, 1 piece rear seal, 2 bolt main, roller block----$1500 Comp 7.4 pushrods---$50 98 Trans am steering wheel with airbag--$50 BMN Nitrous Controller---$75 882 SBC Heads---$20 sub box for dual 10's-----$35 single 12" pioneer in box-----$40 infinity 4x6 plate speakers---$30 cracked ls1 block---$40 ls1 rollermaster double roller timing chain--$50 ls1 water pump--$20 ls1 crank (core)---$20 4 ls1 coil packs---$10 each 2 truck coils----$10 each 3.50 gears for 9"----$50 stock 4l65e torque converter---$25 mobil 1 LS1 oil cap---$5 matco ls1 billet oil cap breather---$35 ls1 cam shell motor mount---$5 2x stock ls1 throttle bodys------$60 with sensors $40 without 2 cheapo 6.5" speakers----$5 fbody pass side airbag with module----$20 new triangle things that go on bottom of fbody sail pannels--$20 LS1 Vally pan with knock sensors-------$40 ev6-ev1 injector harness adapters----$25 msd ls1 plug wires---$30 stock ls2 plug wires with heat shields---$10 bostwic 1 farad cap---$25 stock ls1 pushrods---$10 2 greg weld centercaps---$5 each alot of stock ls1 valvetrain stuff---$? cnc ported 98 ls1 heads-----$250 stock ls1 valvesprings-----$? 2 side post batterys-----$10 each __________________ Funny Last edited by 1998ta__1991rs; 06-06-2010 at 06:32 PM.

06-03-2010, 12:46 AM	#2
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	O yea, And my House 3br, 2bath, around 1500sqft in Grand Oaks Plantation, $233,000 http://maps.google.com/maps?hl=en&q=...ed=0CBcQ8gEwAA http://maps.google.com/maps?hl=en&q=...ed=0CBcQ8gEwAA __________________ Funny

06-03-2010, 07:18 AM	#4
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	15 for the block. that 383 will work in the truck ill take it for 200, and the mobil 1 oil cap i got to have ill give you 2 for that. LMK __________________ IM BAD BOB

06-03-2010, 08:17 AM	#5
Red99T/A Senior Member Join Date: Jun 2009 Location: Goose Creek Posts: 749	might be interested in one of the TBs __________________ 1999 Pontiac Firebird Trans Am: Bright Red, A4. Unicorn 1999 Pontiac Firebird Trans Am WS6: Arctic White, A4, 3.73. 243, K&N, LM1, !AIR/EGR, SLP Lid. DEAD...for now... 2000 Chevrolet Camaro Z28: Monterey Maroon Metallic, A4. Stockish daily driver... 1994 Dodge Intrepid : Emerald Green Metallic...217,xxx miles DEAD 1997 Infiniti QX4 : Sahara Beige Metallic...237,xxx miles DEAD

06-03-2010, 09:37 AM	#7
slow94 Senior Member Join Date: Jan 2007 Location: Pimlico S.C. Posts: 551	might be interested in the 6al box as long as it will work on my truck. __________________ Red 94 lightning mods: paxton NOVI 2K Best e.t.: 8.14 @ 84.5 with a 1.75 60' = SLOW

06-03-2010, 02:30 AM	#3
Carlrx7 Senior Member Join Date: Apr 2010 Location: Ladson,SC Posts: 3,813	whats the occasion? how much for the cracked block,, i think i might make a coffee table or something

06-03-2010, 08:57 AM	#6
silver fox Senior Member Join Date: Mar 2009 Posts: 317	Nos 2 stage plate. How much? Do you have any more of the kit or just plate?

06-03-2010, 10:52 AM	#10
04ctd Senior Member Join Date: Aug 2009 Location: Ladson SC Posts: 4,388	buddy of mine lost his house while back. he makes real good money, but his wife lost her job. had too much on his plate to cover it all. that's a good reality check to think about when i want to finance another toy. 67 Camaro's are all over craigslist for $5~10k its just another bill, and what you gonna do, live in it? i am fed up with financing stuff. __________________ 1 Timothy 3:16 16 And without controversy great is the mystery of godliness: God was manifested in the flesh, Justified in the Spirit, Seen by angels, Preached among the Gentiles, Believed on in the world, Received up in glory.

06-03-2010, 02:01 PM	#12
bwelch Senior Member Join Date: Aug 2009 Posts: 3,774	x2

06-03-2010, 05:26 PM	#14
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	more stuff ev6-ev1 injector harness adapters msd ls1 plug wires stock ls2 plug wires with heat shields bostwic 1 farad cap stock ls1 pushrods 2 greg weld centercaps alot of stock ls1 valvetrain stuff cnc ported 98 ls1 heads stock ls1 valvesprings 2 side post batterys __________________ Funny

06-03-2010, 06:10 PM	#15
LadyInRed Senior Member Join Date: Apr 2010 Location: Charleston Posts: 1,579	Do all these parts take up the other two bedrooms in the house? __________________ 2011 Mustang 3.7L 6spd 2001 Ram 2500 Cummins TT 6spd 1998 Camaro Z28 LS1 6spd 1984 Camaro Z28

06-03-2010, 06:21 PM	#16
Ballaholic29414 Senior Member Join Date: Feb 2009 Location: Charleston, SC Posts: 395	How much for 6al box and hayden 16" electric fan?

06-03-2010, 06:29 PM	#17
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	pm sent __________________ Funny

06-03-2010, 06:30 PM	#18
LXtasy Senior Member Join Date: Dec 2006 Location: Summerville, SC Posts: 9,564	Who did the cnc work? are these the heads you were talking about? I might interested in the nitrous controller __________________

06-03-2010, 07:46 PM	#19
1 Slow Z Senior Member Join Date: Apr 2007 Location: The end of the rainbow! Posts: 968	You don't by chance have a MAF unit laying around to you?