Parts (ford 302 stuff)

toybreaker · 11-04-2010, 11:39 AM

SFI flywheel off of the 88 347 i just bought. should be surfaced before use
$40

1970 points type distributor from my original 302 with a pertronix ignition conversion accel 8mm wires and an accel yellow super stock coil
$100

1970 ford 302 heads $50 (pulled off of a running engine)

Edelbrock 650 cfm carb 2 years old 100 miles (never let it get "gunked" up)
$150

Box of holley vacuum secondary carbs/parts (1 750 with the secondary metering block kit installed, 1 600 with the choke horn milled off, 2 600 cfm carbs, secondary diaphram spring kit, a ton of different power valves)
$250

New SBF standard firing order comp 280 magnum cam
230 Deg duration @ .050
single pattern cam. Brand new never installed. with warranty and cam cards.
$100

40mm Weber dual carbs with intakes linkage and air filter bases. Should be rebuilt before use. they have been sitting for about 2 years
$200

Not sure what else I have. I'll update as I find/sell stuff.

Trades not out of the question.

toybreaker · 12-03-2010, 10:54 AM

TTT

Make a reasonable offer

11-04-2010, 11:39 AM	#1
toybreaker Senior Member Join Date: Sep 2009 Location: Piti, Guam Posts: 203	Parts (ford 302 stuff) SFI flywheel off of the 88 347 i just bought. should be surfaced before use $40 1970 points type distributor from my original 302 with a pertronix ignition conversion accel 8mm wires and an accel yellow super stock coil $100 1970 ford 302 heads $50 (pulled off of a running engine) Edelbrock 650 cfm carb 2 years old 100 miles (never let it get "gunked" up) $150 Box of holley vacuum secondary carbs/parts (1 750 with the secondary metering block kit installed, 1 600 with the choke horn milled off, 2 600 cfm carbs, secondary diaphram spring kit, a ton of different power valves) $250 New SBF standard firing order comp 280 magnum cam 230 Deg duration @ .050 single pattern cam. Brand new never installed. with warranty and cam cards. $100 40mm Weber dual carbs with intakes linkage and air filter bases. Should be rebuilt before use. they have been sitting for about 2 years $200 Not sure what else I have. I'll update as I find/sell stuff. Trades not out of the question. __________________ I am too good for something! I set a very bad example! Last edited by toybreaker; 12-03-2010 at 10:54 AM. Reason: Added 280 magnum cam

12-03-2010, 10:54 AM	#2
toybreaker Senior Member Join Date: Sep 2009 Location: Piti, Guam Posts: 203	TTT Make a reasonable offer __________________ I am too good for something! I set a very bad example!