Bolt on LS1 gets tore up racing new 5.0

TurboWS6 · 01-30-2012, 03:07 PM

Probably not what you expected to see.

http://www.youtube.com/watch?v=KE1f_cqpsLI

TurboWS6 · 01-30-2012, 03:14 PM

here is the carnage.

chrisheltra · 01-30-2012, 03:14 PM

These kind of vids always suck. When shit hits the fan the camera always goes to feet mode and you never get to see the aftermath.

EDIT: I see you added pics, what kind of wheels are those?

1998ta__1991rs · 01-30-2012, 03:26 PM

looks like some cheap hp evos

Darryl Buckner · 01-30-2012, 03:44 PM

That LS motor didn't want to turn 7k plus RPM with the 5.0. I have never seen one let go and go through the fender though, thats a new one. I threw 2 rods out my 2003 Mach 1, but they only put holes in the block..

chrisheltra · 01-30-2012, 03:52 PM

Quote:

Originally Posted by Darryl Buckner

That LS motor didn't want to turn 7k plus RPM with the 5.0. I have never seen one let go and go through the fender though, thats a new one. I threw 2 rods out my 2003 Mach 1, but they only put holes in the block..

Read the discription in the vid.

Darryl Buckner · 01-30-2012, 04:06 PM

Quote:

Originally Posted by chrisheltra

Read the discription in the vid.

My bad. It looked like it threw a rod out and through the shock tower hitting the tire. I'll go to my room now, carry on..

chrisheltra · 01-30-2012, 04:07 PM

Quote:

Originally Posted by Darryl Buckner

My bad. It looked like it threw a rod out and through the shock tower hitting the tire. I'll go to my room now, carry on..

Lol.

I'd rather throw a rod.

TurboWS6 · 01-30-2012, 04:44 PM

Quote:

Originally Posted by Darryl Buckner

That LS motor didn't want to turn 7k plus RPM with the 5.0. I have never seen one let go and go through the fender though, thats a new one. I threw 2 rods out my 2003 Mach 1, but they only put holes in the block..

I don't know judging by the beginning of the race, didn't look like the LS motor needed to turn 7K.

All BS aside though the new 5.0 engine is one hell of a motor, stock for stock they will rape a gen 3 LS, takes a full bolt on LS to beat one and that's if the 5.0 is stock. I have seen it in person at the track and on the street with my one of my buddy's rides, bone stock 02 SS M6 got raped by the same 2012 5.0 from a dig and a roll in both places. Ford has something good going on there. Full bolt on 5.0s with drag radials will run upper 11s all day long, that's impressive.

Shane361 · 01-30-2012, 05:57 PM

Quote:

Originally Posted by TurboWS6

I don't know judging by the beginning of the race, didn't look like the LS motor needed to turn 7K.

All BS aside though the new 5.0 engine is one hell of a motor, stock for stock they will rape a gen 3 LS, takes a full bolt on LS to beat one and that's if the 5.0 is stock. I have seen it in person at the track and on the street with my one of my buddy's rides, bone stock 02 SS M6 got raped by the same 2012 5.0 from a dig and a roll in both places. Ford has something good going on there. Full bolt on 5.0s with drag radials will run upper 11s all day long, that's impressive.

Win is a win! HA HA...it looked like the 5.0 would have lost that one....

Silver-Dollar · 01-30-2012, 04:15 PM

I'd be hitting up the local municipality for a payment.

csikx · 01-30-2012, 06:52 PM

Quote:

Originally Posted by Silver-Dollar

I'd be hitting up the local municipality for a payment.

Yeah, he should bring in the video too as evidence.

TurboWS6 · 01-30-2012, 07:24 PM

Quote:

Originally Posted by csikx

Yeah, he should bring in the video too as evidence.

LMFAO!

Carlrx7 · 01-30-2012, 05:48 PM

wow.... pictures of this pothole!

Silver-Dollar · 01-30-2012, 08:28 PM

Why would he need to? I had a tire replaced once for the same reason. Had the car for a week and blew out a tire because a pothole.

Anyway, the camaro is at least 10 years older. joking of course

Shane361 · 01-30-2012, 08:42 PM

Quote:

Originally Posted by Silver-Dollar

Why would he need to? I had a tire replaced once for the same reason. Had the car for a week and blew out a tire because a pothole.

Anyway, the camaro is at least 10 years older. joking of course

It was a joke...I hit a pot hole...dont pay attention to me street racing!

Silver-Dollar · 01-30-2012, 08:34 PM

list of mods explains all - 1998 camaro. tsp headers, 4k stall 342s. untuned. this pass was a soft launch at 1500rpm. ran a 12.88 @ 4000ft

Silver-Dollar · 01-30-2012, 08:54 PM

no harm, no foul

spdracr0 · 01-30-2012, 11:18 PM

Quote:

Full bolt on 5.0s with drag radials will run upper 11s all day long, that's impressive

Correction, 5.0 automatic with a cold air, tune and drag radials wil run high 11s all day long in the heat. Not really full bolt on.

chrisheltra · 01-31-2012, 07:30 AM

Stock BOSS with DR's will run 11.50's.

01-30-2012, 03:07 PM	#1
TurboWS6 Senior Member Join Date: Jan 2012 Location: Rockingham, NC Posts: 799	Bolt on LS1 gets tore up racing new 5.0 Probably not what you expected to see. http://www.youtube.com/watch?v=KE1f_cqpsLI

01-30-2012, 03:14 PM	#3
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	These kind of vids always suck. When shit hits the fan the camera always goes to feet mode and you never get to see the aftermath. EDIT: I see you added pics, what kind of wheels are those? __________________ Gap A Hoe Racing

01-30-2012, 03:26 PM	#4
1998ta__1991rs Senior Member Join Date: Jun 2008 Location: West Ash Posts: 4,283	looks like some cheap hp evos __________________ Funny

01-30-2012, 03:44 PM	#5
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	That LS motor didn't want to turn 7k plus RPM with the 5.0. I have never seen one let go and go through the fender though, thats a new one. I threw 2 rods out my 2003 Mach 1, but they only put holes in the block.. __________________ When the people fear the government, there is tyranny. When the government fears the people, there is liberty. Thomas Jefferson

01-30-2012, 04:15 PM	#11
Silver-Dollar Senior Member Join Date: Jun 2008 Location: Summerville Posts: 1,019	I'd be hitting up the local municipality for a payment. __________________ 2011 Tundra Crewmax Platinum

01-30-2012, 05:48 PM	#14
Carlrx7 Senior Member Join Date: Apr 2010 Location: Ladson,SC Posts: 3,813	wow.... pictures of this pothole! __________________ Dark Aladdin

01-30-2012, 08:28 PM	#15
Silver-Dollar Senior Member Join Date: Jun 2008 Location: Summerville Posts: 1,019	Why would he need to? I had a tire replaced once for the same reason. Had the car for a week and blew out a tire because a pothole. Anyway, the camaro is at least 10 years older. joking of course __________________ 2011 Tundra Crewmax Platinum

01-30-2012, 08:34 PM	#17
Silver-Dollar Senior Member Join Date: Jun 2008 Location: Summerville Posts: 1,019	list of mods explains all - 1998 camaro. tsp headers, 4k stall 342s. untuned. this pass was a soft launch at 1500rpm. ran a 12.88 @ 4000ft __________________ 2011 Tundra Crewmax Platinum

01-30-2012, 08:54 PM	#18
Silver-Dollar Senior Member Join Date: Jun 2008 Location: Summerville Posts: 1,019	no harm, no foul __________________ 2011 Tundra Crewmax Platinum

01-31-2012, 07:30 AM	#20
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Stock BOSS with DR's will run 11.50's. __________________ Gap A Hoe Racing