Stock location Meziere I/C pump bracket

chrisheltra · 07-26-2007, 09:47 AM

I have made a bracket to install a Meziere I/C pump in the stock location. A drawing with dimensions is below. You will have to remove the stock pump bracket in order to install the new bracket. The new bracket should be made from 3/8 aluminum or steel. It will install with the two screws that were removed to take the stock bracket out.

07-26-2007, 09:47 AM	#1
chrisheltra Neo is Jesus Join Date: Jan 2007 Posts: 13,265	Stock location Meziere I/C pump bracket I have made a bracket to install a Meziere I/C pump in the stock location. A drawing with dimensions is below. You will have to remove the stock pump bracket in order to install the new bracket. The new bracket should be made from 3/8 aluminum or steel. It will install with the two screws that were removed to take the stock bracket out. __________________ Gap A Hoe Racing

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode