Custom Drag Springs

1BAD4DR · 02-13-2012, 06:21 PM

My buddy owns an 01 gmc extended cab 2wd and when he did his spring swap for towing a huge boat in the front he used f-250 coils in his from an aftermarket dealer. This was about two years ago and the springs were the same part number for a 01-04 superduty. The diameter of the stock springs and the f-250 springs were so close we couldnt tell the difference. I dont see why the jdm ones would be any different. Wouldnt the only difference be the poundage on the spring itself and the diameter of the coils theirselves?

02-13-2012, 06:21 PM	#11
1BAD4DR Senior Member Join Date: Feb 2007 Location: Goose Creek, SC Posts: 1,364	My buddy owns an 01 gmc extended cab 2wd and when he did his spring swap for towing a huge boat in the front he used f-250 coils in his from an aftermarket dealer. This was about two years ago and the springs were the same part number for a 01-04 superduty. The diameter of the stock springs and the f-250 springs were so close we couldnt tell the difference. I dont see why the jdm ones would be any different. Wouldnt the only difference be the poundage on the spring itself and the diameter of the coils theirselves? __________________ I wish dupree would hurry up...