Why the LTD fell off!

Darryl Buckner · 05-08-2008, 02:57 PM

Well after much retuning of the carb to try and figure out why the LTD 60' fell off, I finally figured it out. She was running on 7 cylinders, apparently I need to retake the valve adjusting class. I had them set way too loose, and the push rod came out from under the rocker and broke the rocker next to it, then tried to jam it back down breaking the push rod in 3 peices, and eventually breaking a lifter. Luckily I found all the metal peices, after removing the intake. I mush have had too many Michelob ultras that night!

05-08-2008, 02:57 PM	#1
Darryl Buckner The Top Dog Join Date: Dec 2007 Posts: 2,318	Why the LTD fell off! Well after much retuning of the carb to try and figure out why the LTD 60' fell off, I finally figured it out. She was running on 7 cylinders, apparently I need to retake the valve adjusting class. I had them set way too loose, and the push rod came out from under the rocker and broke the rocker next to it, then tried to jam it back down breaking the push rod in 3 peices, and eventually breaking a lifter. Luckily I found all the metal peices, after removing the intake. I mush have had too many Michelob ultras that night! Last edited by chrisheltra; 05-08-2008 at 03:01 PM.