Need local fabricator/ welder

WWhittle · 07-19-2011, 09:35 PM

Just a small, quick job. I need someone to weld some tabs on the front of my pit ride for my pushbar for the hotrod. I'm very picky, so it needs to be someone who can weld very good! If I wanted it to look like shit I would do it myself!! LOL.

Tabs something like these: http://www.summitracing.com/parts/AAF-ALL60002/

Pretty simple- just weld tabs to brush guard on the ATV and that's it. I don't have any tabs, so if you have the tabs or can just make some that's even better.

Need it done ASAP!

Thanks

BAD BOB · 07-19-2011, 09:39 PM

when we talking asap? i got a mig and tig at the shop but am out right now but should be back in thurday and friday

WWhittle · 07-19-2011, 09:52 PM

Quote:

Originally Posted by BAD BOB

when we talking asap? i got a mig and tig at the shop but am out right now but should be back in thurday and friday

Thursday would be great. You have any tabs?

BAD BOB · 07-19-2011, 09:55 PM

well if i know what size tube it is welding too on the brush gaurd and what size hole for the bolt/pin then i can make or get some

WWhittle · 07-19-2011, 10:03 PM

Quote:

Originally Posted by BAD BOB

well if i know what size tube it is welding too on the brush gaurd and what size hole for the bolt/pin then i can make or get some

I know it's a 1/2" diameter pin. I will measure tube for you tomorrow. Thanks!

BAD BOB · 07-19-2011, 10:17 PM

just message me tomorrow and if the pin that goes through the tabs goes through hiems on the push bar let me know how far apart that need to be. the best, strongest way would be to weld everything to another half of a piece of tubing then just weld the whole unit to the brush bar and make gussets to make it a little stronger so if it gets any side movement. my cell is 200-3196

slowgreen99 · 07-19-2011, 10:19 PM

Bbmttmff

slowgreen99 · 07-19-2011, 10:19 PM

smms#2 in a close second

ShawnBoyMoody · 07-19-2011, 10:35 PM

WWhittle · 07-19-2011, 10:48 PM

Quote:

Originally Posted by BAD BOB

just message me tomorrow and if the pin that goes through the tabs goes through hiems on the push bar let me know how far apart that need to be. the best, strongest way would be to weld everything to another half of a piece of tubing then just weld the whole unit to the brush bar and make gussets to make it a little stronger so if it gets any side movement. my cell is 200-3196

Sounds good to me. I will message you to tomorrow.

WWhittle · 07-21-2011, 06:05 PM

BADBOB hooked me up today! Thank you very much! Excellent job for a good price, can't ask for anything else.

BAD BOB · 07-21-2011, 08:48 PM

and thanks for allowing me to help out. Hope it all works out, oh and good luck this weekend give them hell

07-19-2011, 09:35 PM	#1
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	Need local fabricator/ welder Just a small, quick job. I need someone to weld some tabs on the front of my pit ride for my pushbar for the hotrod. I'm very picky, so it needs to be someone who can weld very good! If I wanted it to look like shit I would do it myself!! LOL. Tabs something like these: http://www.summitracing.com/parts/AAF-ALL60002/ Pretty simple- just weld tabs to brush guard on the ATV and that's it. I don't have any tabs, so if you have the tabs or can just make some that's even better. Need it done ASAP! Thanks

07-19-2011, 09:55 PM	#4
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	well if i know what size tube it is welding too on the brush gaurd and what size hole for the bolt/pin then i can make or get some __________________ IM BAD BOB

07-19-2011, 10:17 PM	#6
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	just message me tomorrow and if the pin that goes through the tabs goes through hiems on the push bar let me know how far apart that need to be. the best, strongest way would be to weld everything to another half of a piece of tubing then just weld the whole unit to the brush bar and make gussets to make it a little stronger so if it gets any side movement. my cell is 200-3196 __________________ IM BAD BOB

07-19-2011, 10:19 PM	#7
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	Bbmttmff __________________ M.R.E. Bad Bob Motorsports

07-19-2011, 10:19 PM	#8
slowgreen99 Senior Member Join Date: Jan 2008 Location: Summerville Posts: 7,740	smms#2 in a close second __________________ M.R.E. Bad Bob Motorsports

07-19-2011, 09:39 PM	#2
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	when we talking asap? i got a mig and tig at the shop but am out right now but should be back in thurday and friday __________________ IM BAD BOB

07-19-2011, 10:35 PM	#9
ShawnBoyMoody Senior Member Join Date: Aug 2009 Location: In the lab.... Posts: 8,159	__________________ The Krusty Koupe "Luck favors the oblivious, and boy am I lucky!"

07-21-2011, 06:05 PM	#11
WWhittle Senior Member Join Date: Apr 2008 Location: Mt. Pleasant, SC Posts: 3,899	BADBOB hooked me up today! Thank you very much! Excellent job for a good price, can't ask for anything else.

07-21-2011, 08:48 PM	#12
BAD BOB Senior Member Join Date: Mar 2008 Location: SUMMERVILLE Posts: 3,681	and thanks for allowing me to help out. Hope it all works out, oh and good luck this weekend give them hell __________________ IM BAD BOB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode